EXTRA PARTS BOX...Small items for sale/trade.
Forum rules
Please Note: Only Members 18 Years And Older Are Allowed To Post And Trade, and you must have been a member of this forum for 6 months to participate.
Please Note: Only Members 18 Years And Older Are Allowed To Post And Trade, and you must have been a member of this forum for 6 months to participate.
-
- Officer - Brigadier General
- Posts: 4890
- Joined: Thu Oct 07, 2004 5:17 am
- Location: Northern Kentucky
EXTRA PARTS BOX...Small items for sale/trade.
Ok, let's give this Parts Box idea a try. See how useful it is to members. As far as having 'someone' clean up the old posts, well, the individual who made the post can be responsible for this. Everyone has the ability to edit and delete their own posts. Icons for this are in the top right corner of the individual post.
So, let's see how it goes..
aferguson
-------------------------------------------------------------------------------
To all:
Had a brainstorm of sorts. Ok it was just a small drizzle.
There are many of us here that have every 1/18 figures, vehicle, plane etc made by 21st Century and BBI and others plus duplicates.
As we collect, we gather an extra arm, rifle, canteen, fuel tank etc. in our parts box or boxes.
But for the new members just starting out, they don't have that extra piece to fix or replace something that is missing or broken.
So, what do you guys think about a sticky under the Sell/Trade section for just loose parts that we are looking for or want to sell?
You could post:
Selling-
(5)S1 Canteens - 1.00
**********************
Needed-
(3)Vietnam flashlights
Something like that...
What do you guys think?
P51 and AFerg- what are your thoughts?
As a side note, can we have someone clean up (remove) the posts that:
A-Sold
B-No response within 2wks-month
So, let's see how it goes..
aferguson
-------------------------------------------------------------------------------
To all:
Had a brainstorm of sorts. Ok it was just a small drizzle.
There are many of us here that have every 1/18 figures, vehicle, plane etc made by 21st Century and BBI and others plus duplicates.
As we collect, we gather an extra arm, rifle, canteen, fuel tank etc. in our parts box or boxes.
But for the new members just starting out, they don't have that extra piece to fix or replace something that is missing or broken.
So, what do you guys think about a sticky under the Sell/Trade section for just loose parts that we are looking for or want to sell?
You could post:
Selling-
(5)S1 Canteens - 1.00
**********************
Needed-
(3)Vietnam flashlights
Something like that...
What do you guys think?
P51 and AFerg- what are your thoughts?
As a side note, can we have someone clean up (remove) the posts that:
A-Sold
B-No response within 2wks-month
Last edited by Razor17019 on Wed Apr 05, 2006 1:20 pm, edited 1 time in total.
-
- Corporal
- Posts: 68
- Joined: Mon Feb 14, 2005 11:41 am
-
- Officer - Colonel
- Posts: 1292
- Joined: Fri Apr 01, 2005 5:49 am
- Location: Great Britain
- Contact:
Does anyone else make casts of these types of parts? I made casts of a bunch of modern BBI pouches, canteens, ect for use on custom figures. I can't exactly share copies with anyone right now, since I'm still stuck in Iraq, but I could possibly trade off extras when I get home this fall...
Someone else should think about casting these type of parts. Especially since I don't do WWII and have not cast any of that stuff.
I'll see if I have any pictures of casts to share...
Someone else should think about casting these type of parts. Especially since I don't do WWII and have not cast any of that stuff.
I'll see if I have any pictures of casts to share...
-
- Officer - Brigadier General
- Posts: 4890
- Joined: Thu Oct 07, 2004 5:17 am
- Location: Northern Kentucky
-
- Officer - Brigadier General
- Posts: 4890
- Joined: Thu Oct 07, 2004 5:17 am
- Location: Northern Kentucky
PARTS BOX #1
Thanks AFerg for setting up the Parts Box Stick!
I will take the opportunity to thank AFerg and P51 for their time in keeping up the board and giving us big kids a place to PLAY!
Here is my first Parts Box entry-
Needed:
M60 Mutt mount or complete pole and mount.
This is not like the willy's jeep MG mount.
Email me: [email protected] if you have one available
Sell / Trade:
-Lot of 5 pairs of 21st S1 US fixed/moveable arms
-3 BBI rifles with scopes and wire stock (M-14s?)
-1 BBI .50Cal Machine Gun
All or Each item can be purchased/traded for individually
Email me: [email protected] with any questions
I will take the opportunity to thank AFerg and P51 for their time in keeping up the board and giving us big kids a place to PLAY!
Here is my first Parts Box entry-
Needed:
M60 Mutt mount or complete pole and mount.
This is not like the willy's jeep MG mount.
Email me: [email protected] if you have one available
Sell / Trade:
-Lot of 5 pairs of 21st S1 US fixed/moveable arms
-3 BBI rifles with scopes and wire stock (M-14s?)
-1 BBI .50Cal Machine Gun
All or Each item can be purchased/traded for individually
Email me: [email protected] with any questions
Here is a picture of a few cast spares I have with me. I have dozens of each and others at home and once I get back there I may have to offer them up as trade fodder.
Also, here is a link to a great tutorial on making molds and casting parts: http://www.ironcowprod.com/forums/viewtopic.php?t=319
There are also some good tips on this subject and other customizing topics at http://www.ffurg.com/
Also, here is a link to a great tutorial on making molds and casting parts: http://www.ironcowprod.com/forums/viewtopic.php?t=319
There are also some good tips on this subject and other customizing topics at http://www.ffurg.com/
-
- Officer - Colonel
- Posts: 1292
- Joined: Fri Apr 01, 2005 5:49 am
- Location: Great Britain
- Contact:
Don,
I won`t say no to your casted BBI pouches/etc mate they look Bloody awesome mate Nice work
As for me,I`m looking for some:-
DUSTY TRAIL HALO Jumper figures (4" ones) Not bothered if Chute is with the figure or not. looking for a few if at all possible.
email [email protected] if you can help
Thank`s
Ja
Steel Bonnet
I won`t say no to your casted BBI pouches/etc mate they look Bloody awesome mate Nice work
As for me,I`m looking for some:-
DUSTY TRAIL HALO Jumper figures (4" ones) Not bothered if Chute is with the figure or not. looking for a few if at all possible.
email [email protected] if you can help
Thank`s
Ja
Steel Bonnet
-
- Corporal
- Posts: 68
- Joined: Mon Feb 14, 2005 11:41 am
Im looking for the ammo drum(s) for an MG42, I have the arms from the germans with the coats(open and closed) 3 sets, 2 sets with the stripe on one sleeve and the green uniform coat off arms, a Holstered p38/luger and a strapped pouch with the canteen, also have a Kar98 and MP40 if any one wants to give up an MP44. All these are in great shape and Id expect the same in return. THX
DONE DEAL THX!
DONE DEAL THX!
Last edited by Emil Frand on Tue Apr 11, 2006 1:51 pm, edited 1 time in total.
-
- Officer - Brigadier General
- Posts: 4890
- Joined: Thu Oct 07, 2004 5:17 am
- Location: Northern Kentucky
-
- Officer - Colonel
- Posts: 1292
- Joined: Fri Apr 01, 2005 5:49 am
- Location: Great Britain
- Contact:
-
- Officer - Brigadier General
- Posts: 4890
- Joined: Thu Oct 07, 2004 5:17 am
- Location: Northern Kentucky
Looking for 21C Vietnam AK-47's for the boatload of NVA I have. 10 RPG's vs one M41 just doesn't seem fair.
I know that in the real conflict the NVA used quite a wide variety of weapons from WWII to French made SMG's, but I pattern most of my dioramas after the Rambo movies so I'm sure you understand.
I know that in the real conflict the NVA used quite a wide variety of weapons from WWII to French made SMG's, but I pattern most of my dioramas after the Rambo movies so I'm sure you understand.
-
- Officer - Brigadier General
- Posts: 4890
- Joined: Thu Oct 07, 2004 5:17 am
- Location: Northern Kentucky
Grunt,
Have you seen Marauder Inc. on Ebay?
He makes a wide variety of weapons to fit 3 3/4 GI Joes, but fit our XD guys too.
Here is a link to his store:
http://stores.ebay.com/Marauder-inc_W0Q ... Q3a3QQtZkm
Have you seen Marauder Inc. on Ebay?
He makes a wide variety of weapons to fit 3 3/4 GI Joes, but fit our XD guys too.
Here is a link to his store:
http://stores.ebay.com/Marauder-inc_W0Q ... Q3a3QQtZkm