1:18 German Lafette MG34-42 Tripod - New batch, lower price
- grunt1
- Officer - Brigadier General
- Posts: 2979
- Joined: Tue Jul 25, 2006 8:41 pm
- Location: Indiana
- Contact:
1:18 German Lafette MG34-42 Tripod - New batch, lower price
Was $15, now $10 and includes assembly screw and nut.
You can put in a hob-bit screw with a pilot hole and it is designed to rotate
on the site rail. I also included the advanced optics and sight. I
supposed you could clip those off if you wanted a unit without them.
You can put in a hob-bit screw with a pilot hole and it is designed to rotate
on the site rail. I also included the advanced optics and sight. I
supposed you could clip those off if you wanted a unit without them.
Last edited by grunt1 on Sat Jul 16, 2011 8:42 am, edited 8 times in total.
-
- Officer - Brigadier General
- Posts: 9649
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
-
- Officer - Brigadier General
- Posts: 4890
- Joined: Thu Oct 07, 2004 5:17 am
- Location: Northern Kentucky
- grunt1
- Officer - Brigadier General
- Posts: 2979
- Joined: Tue Jul 25, 2006 8:41 pm
- Location: Indiana
- Contact:
Thanks guys. I think the sandbags are the old build a Rama ones.
-----------------------------------------------------------
-------- Need a list of everything 1:18? --------
---------- http://www.sshqdb.com --------------
---- Built by the community, for the community ----
-----------------------------------------------------------
My Store: http://www.battlegroundmodels.com
-------- Need a list of everything 1:18? --------
---------- http://www.sshqdb.com --------------
---- Built by the community, for the community ----
-----------------------------------------------------------
My Store: http://www.battlegroundmodels.com
-
- Officer - Brigadier General
- Posts: 2053
- Joined: Wed Jan 24, 2007 11:51 am
- Location: Central Illinois
nice
Really nice - I don't mind delicate for the adult collector. Looks great.
- grunt1
- Officer - Brigadier General
- Posts: 2979
- Joined: Tue Jul 25, 2006 8:41 pm
- Location: Indiana
- Contact:
Ok, gang.. Thanks for the feedback. I've made the final units a bit larger and improved the legs so they are sturdy now. I have 5 of these available at $15 each. Send a PM if you are interested.
Final version:
Prototype vs. final model:
Looks great with a gun crew:
Tripod holds the MG-34 and MG-42 (FoV and 21C) equally well:
5 are available. They come un-painted and require minor assembly. Poster tack or a small screw work really well.
Final version:
Prototype vs. final model:
Looks great with a gun crew:
Tripod holds the MG-34 and MG-42 (FoV and 21C) equally well:
5 are available. They come un-painted and require minor assembly. Poster tack or a small screw work really well.
-----------------------------------------------------------
-------- Need a list of everything 1:18? --------
---------- http://www.sshqdb.com --------------
---- Built by the community, for the community ----
-----------------------------------------------------------
My Store: http://www.battlegroundmodels.com
-------- Need a list of everything 1:18? --------
---------- http://www.sshqdb.com --------------
---- Built by the community, for the community ----
-----------------------------------------------------------
My Store: http://www.battlegroundmodels.com
-
- Private First Class
- Posts: 10
- Joined: Thu Apr 23, 2009 10:30 am
Tripod
I would like one! Price? Type of payment you take and address?
Thanks!
Ken
Thanks!
Ken
Re: Tripod
Ahem:pathfinder44 wrote:I would like one! Price? Type of payment you take and address?
Thanks!
Ken
grunt1 wrote:Ok, gang.. Thanks for the feedback. I've made the final units a bit larger and improved the legs so they are sturdy now. I have 5 of these available at $15 each. Send a PM if you are interested.
I Tan I Epi Tas
-
- Officer - Brigadier General
- Posts: 4890
- Joined: Thu Oct 07, 2004 5:17 am
- Location: Northern Kentucky
- grunt1
- Officer - Brigadier General
- Posts: 2979
- Joined: Tue Jul 25, 2006 8:41 pm
- Location: Indiana
- Contact:
You should be able to just set it on the stand. Or if you mean the mount for the MG, poster tack or a small screw work pretty well.
One on of the MG's, I can't recall which I had to clip off the middle mounting peg so that it could more easily rest in the gap provided by the front and rear mount points.
On another one, I had to shave the opening a bit with a hobby knife to make the channel wide enough for the MG barrel to fit and sit comfortably.
One on of the MG's, I can't recall which I had to clip off the middle mounting peg so that it could more easily rest in the gap provided by the front and rear mount points.
On another one, I had to shave the opening a bit with a hobby knife to make the channel wide enough for the MG barrel to fit and sit comfortably.
-
- Officer - Brigadier General
- Posts: 3484
- Joined: Wed Oct 06, 2004 11:37 am
- Location: Pittsburgh, PA
- Contact:
Does the mount also hold the Marauder Inc. MG-34 by chance? Just curious if that's a usable item with it as well.
http://www.JediDefender.com Bringing Balance to the Force
http://www.FFURG.com The Ultimate Customizing Resource.
Now Hasbro, make us some Head Sculpt & Endor Uniform variations! The new Rebel Fleet Trooper gets the JJ Seal of Approval Though!
http://www.FFURG.com The Ultimate Customizing Resource.
Now Hasbro, make us some Head Sculpt & Endor Uniform variations! The new Rebel Fleet Trooper gets the JJ Seal of Approval Though!
- grunt1
- Officer - Brigadier General
- Posts: 2979
- Joined: Tue Jul 25, 2006 8:41 pm
- Location: Indiana
- Contact:
Oh and I'm doing another set of these because the last ones sold out so
quickly and there were more orders than tri-pods. If you want to put a
pre-order in for the next batch the price is still $15 plus shipping. Shipping
looks like about $5 in a flat rate box to anywhere in the US.
If you want more than one, several can fit in the same box so you can save a
little cash.
I'm happy to help our overseas friends as well, but I'll need your address to
calculate the postage.
quickly and there were more orders than tri-pods. If you want to put a
pre-order in for the next batch the price is still $15 plus shipping. Shipping
looks like about $5 in a flat rate box to anywhere in the US.
If you want more than one, several can fit in the same box so you can save a
little cash.
I'm happy to help our overseas friends as well, but I'll need your address to
calculate the postage.
-
- Officer - Brigadier General
- Posts: 3484
- Joined: Wed Oct 06, 2004 11:37 am
- Location: Pittsburgh, PA
- Contact:
I'm curious on the Marauder Inc. gun... May put an order in after I find out. Thanks Grunt.
http://www.JediDefender.com Bringing Balance to the Force
http://www.FFURG.com The Ultimate Customizing Resource.
Now Hasbro, make us some Head Sculpt & Endor Uniform variations! The new Rebel Fleet Trooper gets the JJ Seal of Approval Though!
http://www.FFURG.com The Ultimate Customizing Resource.
Now Hasbro, make us some Head Sculpt & Endor Uniform variations! The new Rebel Fleet Trooper gets the JJ Seal of Approval Though!