Corey and Matthew - I can appreciate your frustrations and my reply wasn't meant to detract from the concerns you posted about.
When reading all of the various replies over the weekend, I misread a few (that's what I get for reading them on a phone...) and thought there was an overall concern about the timing for custom planes...
That isn't the case, so I'm bowing out of this thread.
We're good, no issues... Peace!
Thanks,
Patrick
Disappointment with Skyworks
-
- Sergeant
- Posts: 121
- Joined: Sun Feb 17, 2008 9:29 am
- Location: Lewisville, TX, USA
- Contact:
Disappointment with Skyworks
Dear Coreyeagle48: Given your recent unfortunate experiences with Skyworks Toys, I feel guilty about the posts I made on SSQH singing Skyworks Toys' praises. I feel very bad about the frustration and mental anguish Jack Plonka has put you through.
My interactions with Jack P. have been mixed.
He did a Me-163 Komet for me that was really nice, althought it lacked a pitot tube and radio mast. His P-51 conversion (Buddy Archer's plane) was also excellent, although it still had six machine guns instead of four. The Hawker Hurricane (Douglas Bader's plane) Jack sent me was truly stunning. Perfectly detailed, with no discernible flaws, it was simply gorgeous.
Now for the bad news. I ordered two Fw-190As from Skyworks,and sent Jack two perfect Fw-190Ds to be converted. I asked that both FW-190A have pitot tubes and DF loop antennas, etc. The first 190A arrived with no pitot tube and a broken DF loop. Its paint job, however, was very nice. The second took nine months to arrive, and then only after I complained to Isaiah Jones at MTS. This second Focke Wulf arrived damaged, and had several major defects as well. I screwed it up even worse trying to repair the damage. I e-mailed Jack and he said to send it back and he would make me a new one for free. This I've done. Anyway, my impression of Jack Plonka is that he is a rather quirky, eccentric guy who has really bitten off more than he can chew. Jack is a brilliant engineer and craftsman, but he has poor business acumen and terrible social skills. Maybe it's cause he's Swiss. Every Swiss I've ever met has been rather odd. Anyway, Corey, here's what I'd do. I'd call Isaiah Jones at Military Toyshop and tell him your problems with the F-16. Isaiah has a lot of leverage over Jack, and Jack listens to him. Maybe Isaiah can get Jack to address your problem. I think I'd also take those other two board members up on their offer to make you a new tailfin for your F-16. At this point, I think Jack is only capable of cranking out his new models. Feel free to PM me if you have any questions or concerns on this matter.
Best Wishes
Don Newman (donnieboy)
Arkansas[/b]
My interactions with Jack P. have been mixed.
He did a Me-163 Komet for me that was really nice, althought it lacked a pitot tube and radio mast. His P-51 conversion (Buddy Archer's plane) was also excellent, although it still had six machine guns instead of four. The Hawker Hurricane (Douglas Bader's plane) Jack sent me was truly stunning. Perfectly detailed, with no discernible flaws, it was simply gorgeous.
Now for the bad news. I ordered two Fw-190As from Skyworks,and sent Jack two perfect Fw-190Ds to be converted. I asked that both FW-190A have pitot tubes and DF loop antennas, etc. The first 190A arrived with no pitot tube and a broken DF loop. Its paint job, however, was very nice. The second took nine months to arrive, and then only after I complained to Isaiah Jones at MTS. This second Focke Wulf arrived damaged, and had several major defects as well. I screwed it up even worse trying to repair the damage. I e-mailed Jack and he said to send it back and he would make me a new one for free. This I've done. Anyway, my impression of Jack Plonka is that he is a rather quirky, eccentric guy who has really bitten off more than he can chew. Jack is a brilliant engineer and craftsman, but he has poor business acumen and terrible social skills. Maybe it's cause he's Swiss. Every Swiss I've ever met has been rather odd. Anyway, Corey, here's what I'd do. I'd call Isaiah Jones at Military Toyshop and tell him your problems with the F-16. Isaiah has a lot of leverage over Jack, and Jack listens to him. Maybe Isaiah can get Jack to address your problem. I think I'd also take those other two board members up on their offer to make you a new tailfin for your F-16. At this point, I think Jack is only capable of cranking out his new models. Feel free to PM me if you have any questions or concerns on this matter.
Best Wishes
Don Newman (donnieboy)
Arkansas[/b]
Go Starbuck!
-
- Officer - Brigadier General
- Posts: 9673
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Re: Disappointment with Skyworks
What can you do for me ?donnieboy wrote:Dear Coreyeagle48: Given your recent unfortunate experiences with Skyworks Toys, I feel guilty about the posts I made on SSQH singing Skyworks Toys' praises. I feel very bad about the frustration and mental anguish Jack Plonka has put you through.
My interactions with Jack P. have been mixed.
He did a Me-163 Komet for me that was really nice, althought it lacked a pitot tube and radio mast. His P-51 conversion (Buddy Archer's plane) was also excellent, although it still had six machine guns instead of four. The Hawker Hurricane (Douglas Bader's plane) Jack sent me was truly stunning. Perfectly detailed, with no discernible flaws, it was simply gorgeous.
Now for the bad news. I ordered two Fw-190As from Skyworks,and sent Jack two perfect Fw-190Ds to be converted. I asked that both FW-190A have pitot tubes and DF loop antennas, etc. The first 190A arrived with no pitot tube and a broken DF loop. Its paint job, however, was very nice. The second took nine months to arrive, and then only after I complained to Isaiah Jones at MTS. This second Focke Wulf arrived damaged, and had several major defects as well. I screwed it up even worse trying to repair the damage. I e-mailed Jack and he said to send it back and he would make me a new one for free. This I've done. Anyway, my impression of Jack Plonka is that he is a rather quirky, eccentric guy who has really bitten off more than he can chew. Jack is a brilliant engineer and craftsman, but he has poor business acumen and terrible social skills. Maybe it's cause he's Swiss. Every Swiss I've ever met has been rather odd. Anyway, Corey, here's what I'd do. I'd call Isaiah Jones at Military Toyshop and tell him your problems with the F-16. Isaiah has a lot of leverage over Jack, and Jack listens to him. Maybe Isaiah can get Jack to address your problem. I think I'd also take those other two board members up on their offer to make you a new tailfin for your F-16. At this point, I think Jack is only capable of cranking out his new models. Feel free to PM me if you have any questions or concerns on this matter.
Best Wishes
Don Newman (donnieboy)
Arkansas[/b]



-
- Officer - Brigadier General
- Posts: 9673
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
-
- Officer - Colonel
- Posts: 1270
- Joined: Sun Jan 21, 2007 8:21 am
- Location: South Louisiana
-
- Officer - Brigadier General
- Posts: 9673
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Well no response to my e-mails and I just called Skyworks . I have his cell phone number. No response so I can only think the worst.
I have refraind from calling people bad names and such but I have put this out to the world to see (OK the XD world ) and have had no reponse from Skyworks. Perhaps it is time to rachet up things .
I have refraind from calling people bad names and such but I have put this out to the world to see (OK the XD world ) and have had no reponse from Skyworks. Perhaps it is time to rachet up things .
-
- Officer - 2nd Lieutenant
- Posts: 364
- Joined: Sun Oct 02, 2005 10:21 pm
- Location: Heart of Dixie (Mississippi)
Planes
Pickel,pickelhaube wrote:Well no response to my e-mails and I just called Skyworks . I have his cell phone number. No response so I can only think the worst.
I have refraind from calling people bad names and such but I have put this out to the world to see (OK the XD world ) and have had no reponse from Skyworks. Perhaps it is time to rachet up things .
I went to his website and checked it out, I saw a lot of really nice planes and kits, but the only thing i didn't see was "anything" that you can't build yourself, so take your losses and move on, No one has the 1/18 custom market cornered, It's WIDE open, so keep hammering on those customs, No one knows what the Future holds.
Hun