1/18 Pavehawk Custom Mods
-
- Officer - Brigadier General
- Posts: 9649
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Hey Guys,
I am having some technical problems with the interior mounts. I have made them to scale . By doing so they are a little flimsy. I want them to actualy work . So when I try to slide the pintel on the bracket (the part that slides ) the bracket SNAPS IN TWO
So I am making the square tubing one size LARGER. This will be a little bigger but at least they will work.
Or,
I can put the slider in the middel of the arm and cast that way. The arm will still swing but but you WILL NOT BE ABLE TO ADJUST IT IN AND OUT.
LET ME KNWO WHAT YOU GUYS WILL PREFER ON THIS.
ALSO THER ARE ONLY 2 GUYS WHO ARE INTERESTED IN THE WINDOW FRAMES. IS THERE ANY MORE ? I NEED TO KNOW BECAUSE THAT WILL MAKE THIS A PRORITY . SO I CAN MAKE THEM OR NOT !!!!!!!!!!!!
The slider is under the pintel in the middel of the arm. It is too fragile to slide.
Here is the roughed in door frame. I am also going to make the window frames and back them up with CLEAR STYREEN. That way it will be a compleated pop in unit. You cut the hole and the frames will cover the rough edges. It has taken me about a day to make the frame as it looks now and it is only one side !!
I am having some technical problems with the interior mounts. I have made them to scale . By doing so they are a little flimsy. I want them to actualy work . So when I try to slide the pintel on the bracket (the part that slides ) the bracket SNAPS IN TWO
So I am making the square tubing one size LARGER. This will be a little bigger but at least they will work.
Or,
I can put the slider in the middel of the arm and cast that way. The arm will still swing but but you WILL NOT BE ABLE TO ADJUST IT IN AND OUT.
LET ME KNWO WHAT YOU GUYS WILL PREFER ON THIS.
ALSO THER ARE ONLY 2 GUYS WHO ARE INTERESTED IN THE WINDOW FRAMES. IS THERE ANY MORE ? I NEED TO KNOW BECAUSE THAT WILL MAKE THIS A PRORITY . SO I CAN MAKE THEM OR NOT !!!!!!!!!!!!
The slider is under the pintel in the middel of the arm. It is too fragile to slide.
Here is the roughed in door frame. I am also going to make the window frames and back them up with CLEAR STYREEN. That way it will be a compleated pop in unit. You cut the hole and the frames will cover the rough edges. It has taken me about a day to make the frame as it looks now and it is only one side !!
-
- Officer - Brigadier General
- Posts: 1919
- Joined: Tue Dec 07, 2004 10:06 pm
- Location: Georgia
- Contact:
Matt,
The new "larger" arms look great to me. I don't think the increase in size is a problem in my book. The fact that they work and don't break out weighs the slight change in size. Great job all around.
I say go with the larger ones so that they work.
I would be interested in tow sets of the window frames if that will bump it to three guys and a priority level....
Keep up the fatastic work!!!
The new "larger" arms look great to me. I don't think the increase in size is a problem in my book. The fact that they work and don't break out weighs the slight change in size. Great job all around.
I say go with the larger ones so that they work.
I would be interested in tow sets of the window frames if that will bump it to three guys and a priority level....
Keep up the fatastic work!!!
Go Ugly Early in 1/18!!
Still waiting and wishing for a 1/18 A-10 Warthog.
Still waiting and wishing for a 1/18 A-10 Warthog.
-
- Officer - Brigadier General
- Posts: 9649
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Hey Bird Dog,Birddog wrote:Matt,
The new "larger" arms look great to me. I don't think the increase in size is a problem in my book. The fact that they work and don't break out weighs the slight change in size. Great job all around.
I say go with the larger ones so that they work.
I would be interested in tow sets of the window frames if that will bump it to three guys and a priority level....
Keep up the fatastic work!!!
The ones in the pics are the original scale (smaller) ones .
I was throw the question out there for guys who want the interior mounts.
Thanks for upping the anti on the windows. One more guy and and it will be done. If not I will go ahead and do it but not put a rush on it.
-
- Officer - 1st Lieutenant
- Posts: 596
- Joined: Mon Jun 30, 2008 10:58 am
- Location: 1, USA, MO, St. Louis
PH,
I think I sent you a PM on this, but I don't care if the internal gun mount has the slider. If all the others who want the internals want the slider and larger size so be it, but I'm fine with the scale size and no slider.
No window covers for me.
Phil
I think I sent you a PM on this, but I don't care if the internal gun mount has the slider. If all the others who want the internals want the slider and larger size so be it, but I'm fine with the scale size and no slider.
No window covers for me.
Phil
"Where's dat waskily wabbit?"
____________________________________________
Good Trades: Ostketten, Pickelhaube, Cornbreadfred, Sledgehammer, Pizzaguy, caesarbc3,jwcarpenter
____________________________________________
Good Trades: Ostketten, Pickelhaube, Cornbreadfred, Sledgehammer, Pizzaguy, caesarbc3,jwcarpenter
-
- Officer - 1st Lieutenant
- Posts: 596
- Joined: Mon Jun 30, 2008 10:58 am
- Location: 1, USA, MO, St. Louis
Internal gun mounts progress?
PH,
I was wondering how the internal gun mounts are coming? I want to order sets of the fuel probe, and radar domes, as well but want to place the order all at the same time and they aren't up at Foxhole yet.
Phil
I was wondering how the internal gun mounts are coming? I want to order sets of the fuel probe, and radar domes, as well but want to place the order all at the same time and they aren't up at Foxhole yet.
Phil
"Where's dat waskily wabbit?"
____________________________________________
Good Trades: Ostketten, Pickelhaube, Cornbreadfred, Sledgehammer, Pizzaguy, caesarbc3,jwcarpenter
____________________________________________
Good Trades: Ostketten, Pickelhaube, Cornbreadfred, Sledgehammer, Pizzaguy, caesarbc3,jwcarpenter
-
- Officer - Brigadier General
- Posts: 9649
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Re: Internal gun mounts progress?
I was hoping to have them done already but this car hunting has gotten the best of me. I hope to get on it Thurs or Fri and have some pics postedpcoughran wrote:PH,
I was wondering how the internal gun mounts are coming? I want to order sets of the fuel probe, and radar domes, as well but want to place the order all at the same time and they aren't up at Foxhole yet.
Phil
-
- Officer - 1st Lieutenant
- Posts: 596
- Joined: Mon Jun 30, 2008 10:58 am
- Location: 1, USA, MO, St. Louis
PH,
I know all the Huey guys are pestering you already for some mods. I already have my pavehawk windows torn out and ready for some internal mounts guns though. Any progress with these?
Thanks,
Phil
I know all the Huey guys are pestering you already for some mods. I already have my pavehawk windows torn out and ready for some internal mounts guns though. Any progress with these?
Thanks,
Phil
"Where's dat waskily wabbit?"
____________________________________________
Good Trades: Ostketten, Pickelhaube, Cornbreadfred, Sledgehammer, Pizzaguy, caesarbc3,jwcarpenter
____________________________________________
Good Trades: Ostketten, Pickelhaube, Cornbreadfred, Sledgehammer, Pizzaguy, caesarbc3,jwcarpenter
-
- Officer - Brigadier General
- Posts: 9649
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
I thought that I would have gotten on them by now. But painting the rest of the kits going out has been slooooooooooooooooooooooooow going.pcoughran wrote:PH,
I know all the Huey guys are pestering you already for some mods. I already have my pavehawk windows torn out and ready for some internal mounts guns though. Any progress with these?
Thanks,
Phil
I do have a few of the originals but I feel that they are a little flimsy and fragile. I could send those out to you and you can tell me if you think they are good to go. They are yours as lagniappe untill I get the SECOND PROTOTYPE done.
That way they will be consumer tested
-
- Officer - 1st Lieutenant
- Posts: 596
- Joined: Mon Jun 30, 2008 10:58 am
- Location: 1, USA, MO, St. Louis
PH,
I'm not meaning to hound you. I can wait for the real deal. I just want to know that it will be done eventually. I can wait. If you decide however that you aren't going to do the internal mounts let me know that too as I would then go ahead and order the external with the fuel probe and domes now. I'd rather have the internal mounts though.
I feel fortunate to be able to get anything though and really do appreciate your talent and hard work.
Thanks as always,
Phil
I'm not meaning to hound you. I can wait for the real deal. I just want to know that it will be done eventually. I can wait. If you decide however that you aren't going to do the internal mounts let me know that too as I would then go ahead and order the external with the fuel probe and domes now. I'd rather have the internal mounts though.
I feel fortunate to be able to get anything though and really do appreciate your talent and hard work.
Thanks as always,
Phil
"Where's dat waskily wabbit?"
____________________________________________
Good Trades: Ostketten, Pickelhaube, Cornbreadfred, Sledgehammer, Pizzaguy, caesarbc3,jwcarpenter
____________________________________________
Good Trades: Ostketten, Pickelhaube, Cornbreadfred, Sledgehammer, Pizzaguy, caesarbc3,jwcarpenter
-
- Officer - Brigadier General
- Posts: 9649
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Hey Phil,pcoughran wrote:PH,
I'm not meaning to hound you. I can wait for the real deal. I just want to know that it will be done eventually. I can wait. If you decide however that you aren't going to do the internal mounts let me know that too as I would then go ahead and order the external with the fuel probe and domes now. I'd rather have the internal mounts though.
I feel fortunate to be able to get anything though and really do appreciate your talent and hard work.
Thanks as always,
Phil
No I AM going to do the internal mounts. It is just a pain in as much as the SCALE ones are too fragile. These are not that easy to do so when you do something and it does not work as planed .
That is a major drag.
-
- Officer - Brigadier General
- Posts: 9649
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Sometimes the best solution is the easiest. I put a little ring around the pintel post. This should give it enough reinforcement to hold up.
So I think with fingers crossed the internal gun mount isuue is solved .
Here it is. By putting the ring on it I had to make the pintel shaft about 2 mm longer.
I should be able to mould it on Wends. But the resin did not make it today
Here is the interior mount in place. . It is the old one without the ring.
Here is the M-134 mounted.
So I think with fingers crossed the internal gun mount isuue is solved .
Here it is. By putting the ring on it I had to make the pintel shaft about 2 mm longer.
I should be able to mould it on Wends. But the resin did not make it today
Here is the interior mount in place. . It is the old one without the ring.
Here is the M-134 mounted.
-
- Officer - Brigadier General
- Posts: 9649
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
-
- Sergeant
- Posts: 129
- Joined: Mon Mar 03, 2008 5:27 pm
- Location: OR
- Contact:
We can have the internal gun mount set available at Foxhole Toys (in plain 'unpainted' resin) pretty quickly and at a better price point...based on resin availability. Matthew is working very hard on many projects at the moment so we really appreciate your patience and we thank you for enthusiasm guys! You're the best of the best here at SSMHF!
Matt
Matt
Foxhole Toys ..."Dive in!"
www.FoxholeToys.com
www.FoxholeToys.com
-
- Officer - Brigadier General
- Posts: 9649
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Hey Guys,
Here is the paint scheme that one of the guys who baught my custom off of e-bay is going to paint his Pavehawk.
This looks SWEET !!!!
http://focalplaneimagery.smugmug.com/Mi ... 6514_4u8zD
Here is the paint scheme that one of the guys who baught my custom off of e-bay is going to paint his Pavehawk.
This looks SWEET !!!!
http://focalplaneimagery.smugmug.com/Mi ... 6514_4u8zD
Do you have any plans of putting another customized one up on ebay anytime soon?pickelhaube wrote:Hey Guys,
Here is the paint scheme that one of the guys who baught my custom off of e-bay is going to paint his Pavehawk.
This looks SWEET !!!!
http://focalplaneimagery.smugmug.com/Mi ... 6514_4u8zD