1/18 scale Lockheed Martin F-16CJ Blk 52 Hellenic Air Force

Love to tweak toys and models? Add features and small details? This forum is for you!
User avatar
supersonicfifi
Officer - Colonel
Officer - Colonel
Posts: 1269
Joined: Wed Jun 01, 2005 2:47 pm
Location: FRANCE

ME TOO !

Post by supersonicfifi » Mon Jun 08, 2009 7:59 am

Me too ! i can't wait to see it ! i will send him an offer to do it with my F16 too ! it will promise to be a fantastic model !
1/18 mirage 2000 & RAFALE should i say more ?

Nick_Karatzides
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 286
Joined: Fri May 01, 2009 4:53 pm
Location: Valley of Death

Post by Nick_Karatzides » Sat Jun 13, 2009 1:12 pm

After placing the cable tape into the base cylinder without spreading clue, I pressed it against the plastic using my thumb, to eliminate any possible bumps or waves that may appeared. Thank to accurate calculations the cable tape ends, came exactly one against the other, almost in a perfect facing touch. To secure the cable tape in this place, I dropped CA glue through the opened holes on plastic.

Image

Image

Image

Image

Image

Image
Last edited by Nick_Karatzides on Thu Jul 04, 2013 5:47 pm, edited 6 times in total.

Nick_Karatzides
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 286
Joined: Fri May 01, 2009 4:53 pm
Location: Valley of Death

Post by Nick_Karatzides » Sat Jun 13, 2009 4:01 pm

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
Last edited by Nick_Karatzides on Thu Jul 04, 2013 5:48 pm, edited 4 times in total.

Nick_Karatzides
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 286
Joined: Fri May 01, 2009 4:53 pm
Location: Valley of Death

Re: 1/18 Lockheed Martin F-16CJ Block 52 Hellenic Air Force

Post by Nick_Karatzides » Sat Jun 20, 2009 4:31 pm

As I personally believe that following simple techniques and sometimes unconventional methods, result in superior effects, I usually do not use enamel or acrylic paint to wash, because I feel risky when applying the paint mixture and let it run. I prefer an easier technique that can be undone if the results are poor - that makes it the perfect technique. I use hard chalk pastels to wash (NOT oil pastels). The hard chalk pastels, look like a teacher would use on the blackboard in school. Do not use the soft oil pastels that artist use to draw on paper. The hard chalk pastels are easy to find in a variety of colors into your local art store or maybe Wal-Mart if in US or ASDA if in UK.

To do the wash, I use an X-acto knife, a small metal or plastic container, an old brush, dish washing soap and a bit of water. Begin by scraping some chalk powder from the side of the chalk pastel stick, carefully put this chalk powder into the small container and add a tiny amount of water and stir. It is important to add a tiny amount of water in order to make the mixture look like mud - not like soup! For this reason, I use a syringe to add just few drops on the hard chalk pastel powder and I stir using the old brush. Because the chalk powder doesn't mix well with the water, a drop of dish washing soap is needed to break the surface tension of the water and also acts as a "glue" to help the chalk powder stick to the model.

Image

Image

Image

Image

Image

Image

Image
Last edited by Nick_Karatzides on Thu Jul 04, 2013 5:49 pm, edited 4 times in total.

Nick_Karatzides
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 286
Joined: Fri May 01, 2009 4:53 pm
Location: Valley of Death

Re: 1/18 Lockheed Martin F-16CJ Block 52 Hellenic Air Force

Post by Nick_Karatzides » Sat Jun 20, 2009 4:36 pm

Once the chalk is fully dissolved into the water/soap mixture it is time to "paint" this mixture on the inner embossed detail on the afterburner's area. "Painting" the mixture is simple - just apply it anywhere it is needed to darken recessed detail. The mixture can be applied carelessly, because any mistakes can be completely removed and redone.

Image

Image

Image

Image

When the chalk wash dried, I rubbed off the high spots with a slightly damp dry (not wet) Q-Tip cotton swab (Kleenex papers can be also used) and I wiped the dark color from the areas should be light colored. The high spots were cleaned to the basic finish and the low spots were left black. I did the chalk wash on the inner embossed detail on the afterburner's area in about 15 minutes which makes it a very quick and effective technique. You can also read about this into Steve Bamford's article, by clicking HERE.

Some of the wash mixture is re-applied and the wash being wiped completely out of the narrow points. If you follow this method, it is adviced to not rinse out the wash container till you are finished this job. You will probably be touching up certain spots a few times, so it helps if you're not mixing up a new chalk mixture each time because you kept cleaning out your container of the chalk wash mixture. I repeated the the wash process with lighter colors where needed. Using micro cotton batons found into cosmetic shop for less than 1£, I applied some lighter colors such as yellow, white, sand, brown, burned iron etc & also black chalk pastel powder on the inner embossed detail on the afterburner's area, to make it look weathered and extensively used. I repeated the weathering process until it satisfied me and finally I sprayed a clear coat to seal the chalk powder in place.

Image

Image

Image

Image

Image

Image

Image

Image

Image
Last edited by Nick_Karatzides on Thu Jul 04, 2013 5:50 pm, edited 4 times in total.

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9649
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Post by pickelhaube » Sat Jun 20, 2009 5:27 pm

How do you take pics wile holding a Dremal ? :shock:
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

VMF115
Officer - Brigadier General
Officer - Brigadier General
Posts: 7112
Joined: Mon Jul 03, 2006 7:30 pm
Location: Clear Lake, South Dakota

Post by VMF115 » Sat Jun 20, 2009 7:31 pm

pickelhaube wrote:How do you take pics wile holding a Dremal ? :shock:
He is not human no one that does this kind of work is human...He must have a third arm..... :shock: :shock: :shock: :shock:
Colonel "Madman" Maddox: Let me hear your guns!
Captain Wild Bill Kelso: My what?
Colonel "Madman" Maddox: Your guns! Ack, ack, ack, ack, ack!
Captain Wild Bill Kelso: [fires his airplane's guns] AHHHH!

flyboy_fx
Officer - Brigadier General
Officer - Brigadier General
Posts: 4336
Joined: Thu Nov 20, 2008 12:42 pm
Location: North Carolina,USA

Post by flyboy_fx » Sat Jun 20, 2009 9:57 pm

HE IS THE MOST AMAZING RIVET COUNTING INTAKE MAKER WE HAVE ON THE FORUM :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock:
"Ever tried. Ever failed. No matter. Try Again. Fail again. Fail better."
--Samuel Beckett

tko211
Fan Club President - All Go Toys
Fan Club President - All Go Toys
Posts: 1880
Joined: Tue Oct 19, 2004 11:50 pm

Post by tko211 » Mon Jun 22, 2009 12:56 pm

Totally Sick! I can't believe the level of work involved to scratch build like that. I am about finished with a scratch built ohka and it nearly killed me. The work just on the turbine fan puts my attempt to total shame. Impressive!

Nick_Karatzides
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 286
Joined: Fri May 01, 2009 4:53 pm
Location: Valley of Death

Re: 1/18 Lockheed Martin F-16CJ Block 52 Hellenic Air Force

Post by Nick_Karatzides » Tue Jun 23, 2009 11:24 pm

The F-16's hot air exhaust of the ECS (Environment Condition System) comes in two different shapes. The old A/B types come with small cover. Here is the way it is covered nowdays on newest Block 52s F-16C/D. The basic shape of the ECS cover made by plastic card and the air exhaust detail will be added later.

Image

Image

Image
Last edited by Nick_Karatzides on Thu Jul 04, 2013 5:51 pm, edited 3 times in total.

VMF115
Officer - Brigadier General
Officer - Brigadier General
Posts: 7112
Joined: Mon Jul 03, 2006 7:30 pm
Location: Clear Lake, South Dakota

Post by VMF115 » Wed Jun 24, 2009 12:44 am

tko211 wrote:Totally Sick! I can't believe the level of work involved to scratch build like that. I am about finished with a scratch built ohka and it nearly killed me. The work just on the turbine fan puts my attempt to total shame. Impressive!
No what the just did^ is Sick...no its more in the lines of mental disease something! :lol: :lol:
Colonel "Madman" Maddox: Let me hear your guns!
Captain Wild Bill Kelso: My what?
Colonel "Madman" Maddox: Your guns! Ack, ack, ack, ack, ack!
Captain Wild Bill Kelso: [fires his airplane's guns] AHHHH!

User avatar
supersonicfifi
Officer - Colonel
Officer - Colonel
Posts: 1269
Joined: Wed Jun 01, 2005 2:47 pm
Location: FRANCE

he is the real mc coy !

Post by supersonicfifi » Thu Jun 25, 2009 5:59 am

This guy is THE real rivet counter !

8)

Now i really can't wait for the result !

GOOD SHOW !

Philippe
1/18 mirage 2000 & RAFALE should i say more ?

Nick_Karatzides
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 286
Joined: Fri May 01, 2009 4:53 pm
Location: Valley of Death

Post by Nick_Karatzides » Tue Jul 07, 2009 10:53 pm

CHAPTER IV - Main landing gear bay construction

The main landing gear bay of this toy is so simple and looks so unreal. I realized that I had to pay much more attention and start scratchbuilding the area, starting from zero. The main landing gear bay is one of the most complex areas on the real F-16 and I had to simulate it on this 1/18 scale model. I did the dimension calculations, sand the outer surface of the air intake tube carefully, cut pieces of styrene plastic card as required and placed them to start the bay's shape.

Image

Image

Image

Image

Image

Image

Image

Image

Image
Last edited by Nick_Karatzides on Thu Jul 04, 2013 5:52 pm, edited 3 times in total.

TEXAS_HOSS
Corporal
Corporal
Posts: 46
Joined: Sat Jul 04, 2009 11:59 am
Location: DFW, Texas

Post by TEXAS_HOSS » Wed Jul 08, 2009 1:25 am

:shock:

:shock:

Wow, i am Greek American, and i must say, this truly is one of the coolest things i have seen, VERY nice job
When shooting a mime, don't use a silencer or his friends will hear you.

Nick_Karatzides
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 286
Joined: Fri May 01, 2009 4:53 pm
Location: Valley of Death

Post by Nick_Karatzides » Sat Jul 11, 2009 5:56 pm

Image

Image

Image

Image

Image

Image

Image

Image

Image
Last edited by Nick_Karatzides on Thu Jul 04, 2013 5:53 pm, edited 3 times in total.

VMF115
Officer - Brigadier General
Officer - Brigadier General
Posts: 7112
Joined: Mon Jul 03, 2006 7:30 pm
Location: Clear Lake, South Dakota

Post by VMF115 » Sat Jul 11, 2009 7:56 pm

WOW this is insanly crazy!!!!!!!!!!!!!!!!!!

Great work!!!!!!!!!!
Colonel "Madman" Maddox: Let me hear your guns!
Captain Wild Bill Kelso: My what?
Colonel "Madman" Maddox: Your guns! Ack, ack, ack, ack, ack!
Captain Wild Bill Kelso: [fires his airplane's guns] AHHHH!

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9649
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Post by pickelhaube » Sat Jul 11, 2009 8:13 pm

The air intake case, connected with the lower surface with ZAP cyanoacrylate super glue and the huge (approximately 2mm wide) gaps were filled with epoxy cream. I prefer to use epoxy putty (or polyester filler with fiberglass grains for special purposes) instead of normal scale modeling putty, because it becomes solid rock within only few minutes, it does not shrink or crack after months or years and most important it is cheaper than dirt. Keep in mind, that a powerful vacuum system to suck away the epoxy dust should be always used to keep the workbench area clean while sanding or milling epoxy or resin materials. Using an issued breathing mask and a pair of surgery latex gloves to prevent dust contact with lung and fingers while sanding or milling epoxy, is also an important matter that you should seriously take care of! I personally wear an overall working suit to keep my clothes clean of any kind of dust while sanding epoxy. Some people might find it too much, but I wouldn't like to bring epoxy dust & grains from my work bench into living room and my beloved.



Now that is going above and beyond the call of duty. :shock:


I walk in the house throw myself on the lazyboy and ask what is for dinner after a long day of filling and sanding. Throw my dusty clothes in the hamper and take my shower. :wink:

This project is looking great !!
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

Nick_Karatzides
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 286
Joined: Fri May 01, 2009 4:53 pm
Location: Valley of Death

Post by Nick_Karatzides » Sun Jul 12, 2009 2:24 pm

pickelhaube wrote:I walk in the house throw myself on the lazyboy and ask what is for dinner after a long day of filling and sanding
Typical scale modeler's return from work bench:

Scale modeler: Yo bitch! Did ya get your fat ass cook some sh1t?
Modeler's wife: Same ol' sh1t U lazy modelcholic mothe'foker!
Scale modeler: Love ya 2 honeybun. Now gime a beer 'n' wash my dusty clothes befor' I got mad 'n' spank ya like the othe' day! Bitch!

:D :D :D :D :D :D :D :D

flyboy_fx
Officer - Brigadier General
Officer - Brigadier General
Posts: 4336
Joined: Thu Nov 20, 2008 12:42 pm
Location: North Carolina,USA

Post by flyboy_fx » Sun Jul 12, 2009 3:57 pm

must resist replying to your post :lol: :lol:
"Ever tried. Ever failed. No matter. Try Again. Fail again. Fail better."
--Samuel Beckett

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9649
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Post by pickelhaube » Sun Jul 12, 2009 6:08 pm

Nick_Karatzides wrote:
pickelhaube wrote:I walk in the house throw myself on the lazyboy and ask what is for dinner after a long day of filling and sanding
Typical scale modeler's return from work bench:

Scale modeler: Yo bitch! Did ya get your fat ass cook some sh1t?
Modeler's wife: Same ol' sh1t U lazy modelcholic mothe'foker!
Scale modeler: Love ya 2 honeybun. Now gime a beer 'n' wash my dusty clothes befor' I got mad 'n' spank ya like the othe' day! Bitch!

:D :D :D :D :D :D :D :D

Man you must have a hidden video hooked up some were in my house. :shock:

I must find it before it falls into enemy hands.
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

Nick_Karatzides
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 286
Joined: Fri May 01, 2009 4:53 pm
Location: Valley of Death

Post by Nick_Karatzides » Tue Jul 14, 2009 6:04 am

Using 0.75mm drill, a single hole opened on the air intake tube, to later host a pitot sensor which is normally can be found just before the engine's intake fan. This drilling should be done now, before connecting the main landing gear bay construction with lower part of F-16's surface and the pitot sensor will be placed later.

Image

Image

The air intake case, connected with the lower surface with CA super glue and the huge (approximately 2mm wide) gaps were filled with epoxy cream. I prefer to use epoxy putty (or polyester filler with fiberglass grains for special purposes) instead of normal scale modeling putty, to close gaps or build new items, because:
  • It becomes solid rock within only few minutes or seconds,
  • it does not shrink and does not crack after months or years,
  • you can pour to any shape that you want but you need to work fast because as soon as you mix it with catalyst cream approx 5%, you have limited time before becoming solid rock,
  • you can also put additional layers of epoxy or polyester filler to build up,
  • you can sand it, you can drill it, you can use any type of scale modeling glue, any type of primer or enamel / acrylic paint on it with no problem,
  • can be purchased at any good crafts store into 250ml, 500ml, 1lt (comes with a tube of catalyst hardener) or bigger canisters and if you can't find it, fear not and try your local decent hardware store and finally...
  • it is cheaper than dirt - estimated prices are £3 to £10 depending the canister size, the quality, if contains fiberglass grains for maximum strenght etc.
Keep in mind that the chemical reaction after mixing the filler with the catalyst hardener, produces some heat that possibly effect on thin plastic parts, so test it first before try it on your scale model. I don’t think that the produced heat is more than Fahrenheit 110, but better watchout.
Last edited by Nick_Karatzides on Thu Jul 04, 2013 5:54 pm, edited 2 times in total.

Nick_Karatzides
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 286
Joined: Fri May 01, 2009 4:53 pm
Location: Valley of Death

Post by Nick_Karatzides » Thu Aug 13, 2009 10:32 am

Remember that epoxy materials are dangerous when breath or shallow and could result skin, eyes or lungs problems or even cancer when used for long period with no precaution measures. Always keep in mind, that a powerful vacuum system to suck away the epoxy dust should be used all time to keep the workbench area clean while sanding or milling epoxy or resin materials. Using an issued breathing mask and a pair of surgery latex gloves to prevent dust contact with lungs and fingers while sanding or milling epoxy, is also an important matter that you should seriously take care of! My recommendation is to also wear an overall working suit (as I do) to keep your clothes dust free while sanding epoxy. Some people might find it too much, but I wouldn't like to bring epoxy dust & grains from my work bench into living room and my beloved.

Image

Image

Image

Image
Last edited by Nick_Karatzides on Thu Jul 04, 2013 5:55 pm, edited 2 times in total.

Nick_Karatzides
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 286
Joined: Fri May 01, 2009 4:53 pm
Location: Valley of Death

Re: 1/18 Lockheed Martin F-16CJ Block 52 Hellenic Air Force

Post by Nick_Karatzides » Wed Sep 23, 2009 7:07 pm

The main landing gear bay basic lines were copied from the T.O manual, lined out with green ink marker and later cut 'n' drilled from white plastic card. Blueprint copies enlarged to 1/18 scale, were used to cut the possessors on exact shape & size and later set into place.

Image

Image

Image

Image

Starting to place cables, actuators, fractional DC motors, hydraulic lines, securing hooks & stuff into the model's main landing gear bay. It may look quite empty now, but everything will be in place and look realistic as the project continues.

Image

Image

Image

Image

Image

Image

Image
Last edited by Nick_Karatzides on Thu Jul 04, 2013 5:56 pm, edited 2 times in total.

tko211
Fan Club President - All Go Toys
Fan Club President - All Go Toys
Posts: 1880
Joined: Tue Oct 19, 2004 11:50 pm

Post by tko211 » Thu Sep 24, 2009 8:52 am

SICK! Just sick! 8)

Post Reply