21C Proto of 1/18 M-10

Your Main Forum For Discussing 1:18 Scale Military Figures and Vehicles.
Jnewboy
Officer - Brigadier General
Officer - Brigadier General
Posts: 2124
Joined: Mon Dec 13, 2010 1:46 am
Location: California
Contact:

Re: 21C Proto of 1/18 M-10

Post by Jnewboy » Fri Jun 29, 2012 11:20 am

TankAce wrote:I agree that taking deposits and buying the M-36 and 88 gun is a great idea.
I have a 1/18 scale 88 gun and it is as big as a 1/18 scale tank.
I am assuming that this will be as big as a 1/6 tank.And the amount of small and big parts that will have to be made is huge.
The size of this thing,amount of resin and amount of parts all points that the Kit will have to sell for more than a 1/18 scale resin tank.
Still i think this will always be a huge seller because the popularity of the 88 gun and the fact that no one else makes them in this scale. It is the biggest 1/6 gun i have seen and people who collect 1/6 dragon and DID Germans will want this.
If I had two grand that I could allocate towards this I would!! I would sell the 88mm in 1/6 for $450 a piece - Built and painted!! I figure about $100-$150 in resin or less right? The thing about the 88mm that is hard is all the little parts but in 1/6 those little parts aren't so little!! :D Easy!!! cast it all and approx $300 in profit per gun sold... After 7 guns sold it would all be profit... I would guesstimate that there are at least 100+ collectors of 1/6 scale that would pay the $450....

ram04
Officer - Colonel
Officer - Colonel
Posts: 1302
Joined: Sun Mar 08, 2009 11:17 pm
Location: Southern Indiana

Re: 21C Proto of 1/18 M-10

Post by ram04 » Fri Jun 29, 2012 11:33 am

I would have to agree with Jnewboy, at a price point of 450.00, they would sell, as stated in 1/6 that would be one large model 8)

flyboy_fx
Officer - Brigadier General
Officer - Brigadier General
Posts: 4336
Joined: Thu Nov 20, 2008 12:42 pm
Location: North Carolina,USA

Re: 21C Proto of 1/18 M-10

Post by flyboy_fx » Fri Jun 29, 2012 12:51 pm

So, while you all focus on that flak, I'll snatch the M36. lol I hope so at least.
"Ever tried. Ever failed. No matter. Try Again. Fail again. Fail better."
--Samuel Beckett

Black_Dragon_One
Officer - Brigadier General
Officer - Brigadier General
Posts: 2032
Joined: Sat Dec 11, 2004 1:23 pm
Location: California

Re: 21C Proto of 1/18 M-10

Post by Black_Dragon_One » Fri Jun 29, 2012 2:12 pm

flyboy_fx wrote:So, while you all focus on that flak, I'll snatch the M36. lol I hope so at least.

price 344.. let see how high
whats up doc....

TankAce
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 298
Joined: Fri May 13, 2011 6:40 pm

Re: 21C Proto of 1/18 M-10

Post by TankAce » Fri Jun 29, 2012 2:48 pm

Black_Dragon_One wrote:
flyboy_fx wrote:So, while you all focus on that flak, I'll snatch the M36. lol I hope so at least.

price 344.. let see how high
Maybe it will go down to $118.00 again and i will bid. :lol:
Seriously,this armor piece and the 1/6 scale 88 gun deserve to be bought by someone who can cast them,otherwise is not worth for a private collector to pay so much.
Last edited by TankAce on Fri Jun 29, 2012 7:18 pm, edited 1 time in total.

flyboy_fx
Officer - Brigadier General
Officer - Brigadier General
Posts: 4336
Joined: Thu Nov 20, 2008 12:42 pm
Location: North Carolina,USA

Re: 21C Proto of 1/18 M-10

Post by flyboy_fx » Fri Jun 29, 2012 3:18 pm

Dayum, Forget the M36. LOOOL :lol:
"Ever tried. Ever failed. No matter. Try Again. Fail again. Fail better."
--Samuel Beckett

TankAce
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 298
Joined: Fri May 13, 2011 6:40 pm

Re: 21C Proto of 1/18 M-10

Post by TankAce » Fri Jun 29, 2012 11:44 pm

The M36 close for $664.00!! :o Not even half of what the King tiger prototype sold.
WOW!! this prices make me realize that Pickel's M-10 and Tiger II are worth every penny.

Threetoughtrucks
Officer - Brigadier General
Officer - Brigadier General
Posts: 5405
Joined: Tue Oct 05, 2004 9:46 am
Location: SOUTH JOISEY
Contact:

Re: 21C Proto of 1/18 M-10

Post by Threetoughtrucks » Sat Jun 30, 2012 9:03 pm

$664 for an unpainted proto is verging on nuts in my book.

Unless you are coping the proto to make some of your own to sell, then there is a method to the madness. :lol:

I have a feeling somebody got into a bidding war and didn't intend to bid that high. You just never know. :shock:

TTT
Sometimes I am the windshield, sometimes, I am the bug.

gliderdwm
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 405
Joined: Sun Mar 15, 2009 8:03 am
Location: Texas

Re: 21C Proto of 1/18 M-10

Post by gliderdwm » Sat Jun 30, 2012 9:18 pm

Yea if it wasn't somebody here that can work with PH or somebody else to replicate this it is a total waste of a nice M36 antitank prototype :(
Maybe Matthew got it we haven't heard from him after the auction end.

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 21C Proto of 1/18 M-10

Post by pickelhaube » Sat Jun 30, 2012 9:53 pm

gliderdwm wrote:Yea if it wasn't somebody here that can work with PH or somebody else to replicate this it is a total waste of a nice M36 antitank prototype :(
Maybe Matthew got it we haven't heard from him after the auction end.

Not me. I can look and see that a few things are not accurate.

As I said before I will make one .

The m-36 turret can be used on a Sherman turret as well as my M-10 hull. So essentially I am half way there now without spending over $600 :wink:
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

Post Reply