1/18 Sherman T-23 Full Build !!!

Your Main Forum For Discussing 1:18 Scale Military Figures and Vehicles.
pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

1/18 Sherman T-23 Full Build !!!

Post by pickelhaube » Sun Sep 05, 2010 8:34 pm

Not sue if I should have posted this under Phil's post or not so I made my own.

Here it is :

viewtopic.php?f=1&t=22062

I started this on Sat. I have a full 2 days into it so far.

This may turn into the snow ball effect. I am not sure if this can just sit on one of the Shermans out there. Or if I will have to do a front glacias plate.

I used a FOV turret as the base. Styreen ribs to get the shape. BBI coupala and escape side hatch . With a FOV gunners top hatch.

AND PLENTY OF BONDO. !!!!

I probably need at least 2 more days on this. I will spend Labor Day laboring on this and hopefullu Tuesday I will get back on those moulds :wink:



Image
Image
Image
Image
Image
Last edited by pickelhaube on Sun Oct 31, 2010 4:14 pm, edited 13 times in total.
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

exether_mega
Officer - Colonel
Officer - Colonel
Posts: 1313
Joined: Thu Dec 09, 2004 10:35 am
Location: Belgium
Contact:

Re: 1/18 scale T-23 turret prototype started

Post by exether_mega » Sun Sep 05, 2010 9:40 pm

WOW ! That's cool to see a T-23 coming :D

Great job as always Pickelhaube :D :D :D

phil

mikeyt
Sergeant
Sergeant
Posts: 178
Joined: Tue May 25, 2010 9:44 pm

Re: 1/18 scale T-23 turret prototype started

Post by mikeyt » Sun Sep 05, 2010 10:46 pm

hope you can make it fit a 21st Century good to see it started :D

exether_mega
Officer - Colonel
Officer - Colonel
Posts: 1313
Joined: Thu Dec 09, 2004 10:35 am
Location: Belgium
Contact:

Re: 1/18 scale T-23 turret prototype started

Post by exether_mega » Sun Sep 05, 2010 11:42 pm

mikeyt wrote:hope you can make it fit a 21st Century :D
I hope so :wink:

phil

normandy
Officer - Brigadier General
Officer - Brigadier General
Posts: 6028
Joined: Mon Oct 04, 2004 6:30 pm
Location: Atlantic Coast

Re: 1/18 scale T-23 turret prototype started

Post by normandy » Mon Sep 06, 2010 3:34 am

Pickel, man your moving right along with this turret and it's looking good!!!

plasticboy
Officer - 1st Lieutenant
Officer - 1st Lieutenant
Posts: 542
Joined: Thu Jul 01, 2010 8:21 am
Location: Taipei. Taiwan
Contact:

Re: 1/18 scale T-23 turret prototype started

Post by plasticboy » Mon Sep 06, 2010 4:25 am

It turn out really good, love to see many type of Sherman appear.
Have fun with toys forever!
http://weylent.blogspot.com/

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 scale T-23 turret prototype started

Post by pickelhaube » Mon Sep 06, 2010 5:47 am

exether_mega wrote:
mikeyt wrote:hope you can make it fit a 21st Century :D
I hope so :wink:

phil
It will fit on all of the Shermans out there. 21st, BBI and of course the FOV. But will it be correct ? I do not know.

I think that it would be perfect for the BBI with it's slanted front hatches and that big rear grill.

Were these used on the M4 hull ?
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

tom@skyworkstoys
Corporal
Corporal
Posts: 52
Joined: Thu Apr 29, 2010 9:09 pm
Contact:

Re: 1/18 scale T-23 turret prototype started

Post by tom@skyworkstoys » Mon Sep 06, 2010 9:05 pm

Pickle,

Turret looks really good! Will this fit the 21st Century tanks?
Tom@SkyWorksToys

exether_mega
Officer - Colonel
Officer - Colonel
Posts: 1313
Joined: Thu Dec 09, 2004 10:35 am
Location: Belgium
Contact:

Re: 1/18 scale T-23 turret prototype started

Post by exether_mega » Mon Sep 06, 2010 9:45 pm

Hey Pickel,

it may fit better on BBi Sherman but it can be mounted on slope hull version too.

Image

phil

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 scale T-23 turret prototype started

Post by pickelhaube » Tue Sep 07, 2010 5:23 am

exether_mega wrote:Hey Pickel,

it may fit better on BBi Sherman but it can be mounted on slope hull version too.

Image

phil
Hey Phil,

That is the later version of the M4A1. I think it has the angled hatches up there. My M4A1 has the earlier strait hatches.

Will this fit on the 21st Sherman ? Yes it will !!! Would it be correct ?

Maybe somebody else with more Sherman knowlage can answer this ?

BTW

Look at the pic Phil posted ( thanks Phil !!! )

Do you guys see all of the tabs and rods around the mantlet ? That is for a water proof shroud that went around it to keep the rain out.

I was planning on not putting all of those things on my mantlet. Did they all have them ? Maybe the earlier ones did not.

Plus this version has the muzzel break it is a American copy of the German muzzel break. I have seen pics with and with out the break. Do you guys want this ?

You Sherman guys input are needed.

Can anybody shed some light on these details ?
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

Threetoughtrucks
Officer - Brigadier General
Officer - Brigadier General
Posts: 5405
Joined: Tue Oct 05, 2004 9:46 am
Location: SOUTH JOISEY
Contact:

Re: 1/18 T-23 turret details needed by Sherman afficianados

Post by Threetoughtrucks » Tue Sep 07, 2010 6:24 am

Much too dusty... :lol:

TTT
Sometimes I am the windshield, sometimes, I am the bug.

Panther F
Officer - Captain
Officer - Captain
Posts: 678
Joined: Sun Oct 15, 2006 7:56 am
Location: Indiana

Re: 1/18 T-23 turret details needed by Sherman afficianados

Post by Panther F » Tue Sep 07, 2010 7:18 am

That is an M4A1 76W Sherman and they are called large hatches or small hatches according to us Shermanholics.

exether_mega
Officer - Colonel
Officer - Colonel
Posts: 1313
Joined: Thu Dec 09, 2004 10:35 am
Location: Belgium
Contact:

Re: 1/18 T-23 turret details needed by Sherman afficianados

Post by exether_mega » Tue Sep 07, 2010 7:56 am

No muzzle brake for me.
No need for rods around mantlet for me.

It can be correct on a 21st Sherman. Maybe a modification on the field.

Anyway, they will fit on my BBi Sherman :D

phil

grockwood
Officer - Major
Officer - Major
Posts: 984
Joined: Sat Oct 16, 2004 5:56 pm
Location: Kansas City, MO.

Re: 1/18 T-23 turret details needed by Sherman afficianados

Post by grockwood » Tue Sep 07, 2010 9:13 am

In US service the T-23 turret was used on the later M4A1 and M4A3 hull with the larger angled hatches. The early style hulls such as the 21st Century and F0V weren't used because the driver and co-driver's hatch wouldn't open with the gun facing ahead. It wouldn't be too hard to rework the FOV's front to make the later verson. Also the Muzzle brake and manlet cover would be on later Shermans with the HVSS. Out of desperation I believe the IDF did mount the T-23 turret on earlier hulls. Not real sure on that though.

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 T-23 turret details needed by Sherman afficianados

Post by pickelhaube » Tue Sep 07, 2010 12:32 pm

Hey Guys,

Thanks for all of the replies.

One more thing.

Should the turret have the long barrel or the shorter 76 mm barrel ? If I go with the earlieer version .

The longer barrel is about 130mm long in 1/18 scale.I will have to make this .

If it takes the 76 mm. I will not have to make the barrel .

Thanks :D
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

exether_mega
Officer - Colonel
Officer - Colonel
Posts: 1313
Joined: Thu Dec 09, 2004 10:35 am
Location: Belgium
Contact:

Re: 1/18 T-23 turret details needed by Sherman afficianados

Post by exether_mega » Tue Sep 07, 2010 12:58 pm

pickelhaube wrote:Hey Guys,

Thanks for all of the replies.

One more thing.

Should the turret have the long barrel or the shorter 76 mm barrel ? If I go with the earlieer version .

The longer barrel is about 130mm long in 1/18 scale.I will have to make this .

If it takes the 76 mm. I will not have to make the barrel .

Thanks :D
For my part, go with the long barrel.

phil

Threetoughtrucks
Officer - Brigadier General
Officer - Brigadier General
Posts: 5405
Joined: Tue Oct 05, 2004 9:46 am
Location: SOUTH JOISEY
Contact:

Re: 1/18 T-23 turret details needed by Sherman afficianados

Post by Threetoughtrucks » Tue Sep 07, 2010 2:02 pm

For my part, I would go with the longer barrel. I would like the muzzle break but if it becomes troublesome or expensive to make, I could live without the muzzle break.

TTT
Sometimes I am the windshield, sometimes, I am the bug.

grockwood
Officer - Major
Officer - Major
Posts: 984
Joined: Sat Oct 16, 2004 5:56 pm
Location: Kansas City, MO.

Re: 1/18 T-23 turret details needed by Sherman afficianados

Post by grockwood » Tue Sep 07, 2010 2:15 pm

Not sure I understand your question. The T-23 turret only mounted the 76mm gun, which was a fairly long gun. The same gun as the picture of the M4A1 w76mm posted earlier in this message . I believe it was refered to as the M1 76mm/L55. By short gun are you referring to the gun in the M10.? That is a navel gun refered to as a 3 inch/76mm/l53.

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 T-23 turret details needed by Sherman afficianados

Post by pickelhaube » Tue Sep 07, 2010 9:06 pm

OK guys for all general purposes the turret is done. I just need to cannalbalize all of the parts off of a BBI turret and it will be done. I will have to get back to that. I really need to start the moulds on the other 2 projects I got going on.

I do not get paid to make prototypes. The money is made from the castings.

I am thinking of also coping the BBI front glacias and hatch area so it can be used on the FOV.

I made the barrel from scratch and stole the muzzel break from a Panzer. I did not get the chance to see if it was correct. I will do that when I put all the pieces parts on and correct the break if needed. :wink:

Here it is :D :D :D

The first pic is in " the pink " with texture.

Image

Image
Image
Image
Image

Image
Image
Image


I will also be making the second earlier round hatch. The oval hatch was the later style.

All you will have to do is cut out the oval one and drop the round one in the hole.

If you want to do that version. :D :wink:
Last edited by pickelhaube on Thu Sep 09, 2010 5:08 am, edited 1 time in total.
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

exether_mega
Officer - Colonel
Officer - Colonel
Posts: 1313
Joined: Thu Dec 09, 2004 10:35 am
Location: Belgium
Contact:

Re: 1/18 T-23 turret prototype build is done !!

Post by exether_mega » Tue Sep 07, 2010 10:16 pm

Pickel, you're the one who keep this hobby alive !

Great work man. Looking realy realy cool :D :D :D

phil

AMERICAN_GRENADIER
Officer - Brigadier General
Officer - Brigadier General
Posts: 2022
Joined: Wed Nov 12, 2008 12:33 pm
Location: USA

Re: 1/18 T-23 turret prototype build is done !!

Post by AMERICAN_GRENADIER » Wed Sep 08, 2010 8:17 am

looks great
"SEMPER FIDELIS!"
Good Traders: Buckyroo, Razor17019, Sentinel
exether_mega, Snake, thehun, Mesa

1958Zelda
Officer - Captain
Officer - Captain
Posts: 804
Joined: Fri May 18, 2007 1:01 pm
Location: SPOKANE, WA

Re: 1/18 T-23 turret prototype build is done !!

Post by 1958Zelda » Wed Sep 08, 2010 10:45 am

that looks Great!

Grognard
Sergeant
Sergeant
Posts: 179
Joined: Tue Aug 31, 2010 8:01 pm
Location: Fort Stewart, GA

Re: 1/18 T-23 turret prototype build is done !!

Post by Grognard » Thu Sep 09, 2010 7:02 pm

Looks great. i'd be interested in one also.

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 T-23 turret / Jumbo Sherman ?? !!

Post by pickelhaube » Sat Sep 25, 2010 6:17 am

Thanks guys !!!!

I have been looking at doing the Jumbo Sherman for a while.

It used the T-23 turret as a base and had 6 inches of additional armor casted around it.

The daunting thing are those duck bill track tabs. That is why I have held off.

But it is still cool looking.

I would make the duck bills , new turret, mantlet, front glacias,top hatch area,front tranny cover and additional side armor.

If I were to do this project it would be after or during the T-34 project.

I will make it to fit on the FOV Shermie.

Anybody interested in this project ?
Last edited by pickelhaube on Sat Oct 02, 2010 5:40 am, edited 1 time in total.
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

exether_mega
Officer - Colonel
Officer - Colonel
Posts: 1313
Joined: Thu Dec 09, 2004 10:35 am
Location: Belgium
Contact:

Re: 1/18 T-23 turret / Jumbo Sherman ?? !!

Post by exether_mega » Sat Sep 25, 2010 9:14 am

Count me in for one !

phil

Post Reply