Keeping your OOB stuff "dust free"?
Keeping your OOB stuff "dust free"?
Hi folks. I'm just getting back into collecting and displaying my 1/18th and 1/32nd
scale stuff again after having it in storage for a few years. These are all out of box
and a little dusty from storage (I hung them from the ceiling in my storage area).
Any tips or tricks on cleaning them up and keeping them clean after I put them in
my new model room?
Thanks
scale stuff again after having it in storage for a few years. These are all out of box
and a little dusty from storage (I hung them from the ceiling in my storage area).
Any tips or tricks on cleaning them up and keeping them clean after I put them in
my new model room?
Thanks
-
- Officer - Brigadier General
- Posts: 4336
- Joined: Thu Nov 20, 2008 12:42 pm
- Location: North Carolina,USA
Re: Keeping your OOB stuff "dust free"?
Pull out that vacuum every week. lol
"Ever tried. Ever failed. No matter. Try Again. Fail again. Fail better."
--Samuel Beckett
--Samuel Beckett
Re: Keeping your OOB stuff "dust free"?
Yeah, that's about where I'm at right now. Tomorrow I'm picking up ten of themflyboy_fx wrote:Pull out that vacuum every week. lol
and I'm going to start the "restoration"/ cleaning work on them. I'm thinking that
between some CAREFUL vacuum work and a little time blowing them off with my
airbrush that I'll be able to get them "pretty" without too much hassle (?)
EDIT: Just looking at my post title I guess that that term ("Dust free") sounds
a little optimistic lol. I probably should've asked..."How do you clean these things?"
-
- Officer - Brigadier General
- Posts: 4336
- Joined: Thu Nov 20, 2008 12:42 pm
- Location: North Carolina,USA
Re: Keeping your OOB stuff "dust free"?
I stick them in the shower and hose them off. Works great unless a custom model is not sealed (I seal mine, but it usually is not a problem) or if a vehicle has pigments applied. That is about it. All the stock 21st stuff can get wet without any problems. It does help to towel dry them to avoid water marks.
"Ever tried. Ever failed. No matter. Try Again. Fail again. Fail better."
--Samuel Beckett
--Samuel Beckett
Re: Keeping your OOB stuff "dust free"?
I never even thought about THAT....Thanks!flyboy_fx wrote:I stick them in the shower and hose them off. Works great unless a custom model is not sealed (I seal mine, but it usually is not a problem) or if a vehicle has pigments applied. That is about it. All the stock 21st stuff can get wet without any problems. It does help to towel dry them to avoid water marks.
Re: Keeping your OOB stuff "dust free"?
I've been using an indoor leaf blower by Metrovac called the DataVac Electric Duster. It works a little too well. Much to my heartbreak, it has made several machine guns and antenna masts disappear on some of my 1/72 scale planes. I would say it is relatively 1/35 and 1/18 scale safe.
I'll use Scotch Magic Tape to lift dust and fingerprints of plastic canopies and windshields. Again, use caution, avoid paint and decals.
I'll use Scotch Magic Tape to lift dust and fingerprints of plastic canopies and windshields. Again, use caution, avoid paint and decals.
Re: Keeping your OOB stuff "dust free"?
I use a large size Paint Brush with soft bristles.
Gently brush all over and it gets in the hard to reach angles.
Wouldn't a vacuum cleaner suck up any loose parts?.
I can imagine emptying a bag of filth on the floor to find a small MG mount
Gently brush all over and it gets in the hard to reach angles.
Wouldn't a vacuum cleaner suck up any loose parts?.
I can imagine emptying a bag of filth on the floor to find a small MG mount
B/S/T Contacts : exether_mega, Fritzkrieg, granch (x3), Grilledcheese, trigger1 (x2), USCGMK2.
Re: Keeping your OOB stuff "dust free"?
I have done exactly that to recover a Stuka antenna.Aslav wrote:I use a large size Paint Brush with soft bristles.
Gently brush all over and it gets in the hard to reach angles.
Wouldn't a vacuum cleaner suck up any loose parts?.
I can imagine emptying a bag of filth on the floor to find a small MG mount
Brushes work too. I bought a cheap natural hair make up brush set from Target. Synthetic have more of a potential to scratch.
Re: Keeping your OOB stuff "dust free"?
Thanks for all the ideas guys.
-
- Officer - Brigadier General
- Posts: 11238
- Joined: Tue Oct 05, 2004 7:38 pm
- Location: Central California
Re: Keeping your OOB stuff "dust free"?
I use that canned air stuff (normally used for cleaning computers) which gets a lot of the dust off, then switch to a light feather-duster to remove what the canned air won't. On occasion I'll wash the non-customized models in water - which works the best for making things look brand new.
"If you fail to plan, you plan to fail."
-
- Officer - 2nd Lieutenant
- Posts: 275
- Joined: Mon Oct 04, 2004 2:08 pm
- Location: 1,Bergen County,Northern N.J.
Re: Keeping your OOB stuff "dust free"?
My wife turned me on to the cosmetic brushes used to put blush on. Pick them up in the drug store. Can't get anything softer and they come in many sizes for figures of vehicles.
Sgt. John Ray 12/8/67 Hill 172
99% of Americans try to avoid getting caught in traffic.
1% of Americans try to avoid getting caught in an ambush.
God Bless Our Troops.
99% of Americans try to avoid getting caught in traffic.
1% of Americans try to avoid getting caught in an ambush.
God Bless Our Troops.
Re: Keeping your OOB stuff "dust free"?
I keep my house hermetically sealed and maintain a vacuum by using air locks to enter and egress. The kids complain about the hazmat suits, but I'm sure they will adjust over time.
"There are some people who disagree with me, they are wrong." --Gen George S. Patton
-
- Officer - Brigadier General
- Posts: 3657
- Joined: Mon Mar 23, 2009 12:28 am
- Location: Victoria,B.C. Canada
Re: Keeping your OOB stuff "dust free"?
I also use a make up brush.
Very soft, and gets into all the hard to reach places.
Very soft, and gets into all the hard to reach places.
Re: Keeping your OOB stuff "dust free"?
I use a combination of that "Swiffer" Duster which is refillable, a make-up brush and canned air to clean all my delicate built models, let alone my 1/18th collectables.
Of course I dust with the conventional stuff under and around but using this method I have never broke anything at all.
~ Jeff
Of course I dust with the conventional stuff under and around but using this method I have never broke anything at all.
~ Jeff
-
- Officer - Brigadier General
- Posts: 9649
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Re: Keeping your OOB stuff "dust free"?
I prefer to leave the dust on.
After a period of time the thickness builds up making a protective barrier .
After a period of time the thickness builds up making a protective barrier .
Re: Keeping your OOB stuff "dust free"?
I made a force field created with secret technology obtained from space aliens. It works fantastic except now when I go to touch them I get zapped with some kind of alien spray. Maybe that’s why my face has turned green? I would just stick with some compressed air. It will keep your face from turning green.
-
- Officer - Brigadier General
- Posts: 5405
- Joined: Tue Oct 05, 2004 9:46 am
- Location: SOUTH JOISEY
- Contact:
Re: Keeping your OOB stuff "dust free"?
Nylon feather duster, made by Swifter Duster.
On those rare occassions when I worry about dust.
After all military vehicles are made to be dirty and a coating of dust is simular to dirt.
In my entire military career, the only time I washed my vehicles was overseas when I would use a washpoint, usually in a river, manned by little people looking for a couple of bucks. The dirt only stayed off for a day anyway.
TTT
On those rare occassions when I worry about dust.
After all military vehicles are made to be dirty and a coating of dust is simular to dirt.
In my entire military career, the only time I washed my vehicles was overseas when I would use a washpoint, usually in a river, manned by little people looking for a couple of bucks. The dirt only stayed off for a day anyway.
TTT
Sometimes I am the windshield, sometimes, I am the bug.
Re: Keeping your OOB stuff "dust free"?
Well once again, thanks for all the tips (And the funny responses) folks I just got ten of my older 1/18th planes home and they DO need a bit of attention before I try and re-hang them.
TTT, I'm hip man 'bout the only time my rides are ever "clean" is the hour
after hitting the wash rack at the Motor Pool. Overseas last deployment we didn't
even try with all the junk ("Moon dust") swirling in the air 24/7.
TTT, I'm hip man 'bout the only time my rides are ever "clean" is the hour
after hitting the wash rack at the Motor Pool. Overseas last deployment we didn't
even try with all the junk ("Moon dust") swirling in the air 24/7.
-
- Officer - Brigadier General
- Posts: 5405
- Joined: Tue Oct 05, 2004 9:46 am
- Location: SOUTH JOISEY
- Contact:
Re: Keeping your OOB stuff "dust free"?
Sorry, I forgot the "treadheads" washing mud from tracked vehicles. While I was in Fort Hood, I remember the gangs of guys with fire hoses blasting those vehicles at wash racks.
I guess we could try that but our 1/18 tanks would not hold up....
TTT
I guess we could try that but our 1/18 tanks would not hold up....
TTT
Sometimes I am the windshield, sometimes, I am the bug.
Re: Keeping your OOB stuff "dust free"?
Paint brush on one hand and a vacuum hose on the other.
TRADE REFERENCES: tmanthegreat, Grilledcheese, Tkjaer21, Delta Team, Blacksnakes, flayrah. fast mover, evilanimation, YT, Jnewboy