1/18 Quad Flak 38 Part Deux
-
- Officer - Brigadier General
- Posts: 9647
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
1/18 Quad Flak 38 Part Deux
Well I almost have this wraped up. A few more days and it will be done. I know everybody is busted because of the Monkey business so I took some time to get on this.
I would say that I am ready for preorders but I know better.
I would say that I am ready for preorders but I know better.
Last edited by pickelhaube on Mon Nov 12, 2018 6:04 pm, edited 17 times in total.
-
- Officer - 2nd Lieutenant
- Posts: 382
- Joined: Mon Jun 02, 2008 8:20 am
- Location: Way down south Mississippi
-
- Officer - Brigadier General
- Posts: 11238
- Joined: Tue Oct 05, 2004 7:38 pm
- Location: Central California
-
- Officer - Brigadier General
- Posts: 3484
- Joined: Wed Oct 06, 2004 11:37 am
- Location: Pittsburgh, PA
- Contact:
That is indeed very cool PH, and I wish I could afford one. Very nice piece.
http://www.JediDefender.com Bringing Balance to the Force
http://www.FFURG.com The Ultimate Customizing Resource.
Now Hasbro, make us some Head Sculpt & Endor Uniform variations! The new Rebel Fleet Trooper gets the JJ Seal of Approval Though!
http://www.FFURG.com The Ultimate Customizing Resource.
Now Hasbro, make us some Head Sculpt & Endor Uniform variations! The new Rebel Fleet Trooper gets the JJ Seal of Approval Though!
-
- Officer - Brigadier General
- Posts: 9647
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
mediump wrote:Beautiful. I will be interested in one of these.
Hey PH, have you ever considered doing a 105 howitzer (us or german)
I made one for my priest that pales in comparison with your work.
Hey Guys,
Thanks a lot.
Mediump. I will consider anything if there is a call for it.
A 105 howitzer would be huge !!! I am there !!!
-
- Officer - 2nd Lieutenant
- Posts: 364
- Joined: Sun Oct 02, 2005 10:21 pm
- Location: Heart of Dixie (Mississippi)
Flak gun
Matthew,
VERY Impressive work as always, Hell i'm like everybody else---I want one Too, But i gotta tell ya i look at these photos and i can't help but laugh--- because in my mind i can see you working, sweat dripping off the end of your nose, --cussing every other breath---trying to put those little bitty parts together with those BIG AZZ HANDS All joking aside it Really looks great, Did you ever decide what to ask for it?
Hun
VERY Impressive work as always, Hell i'm like everybody else---I want one Too, But i gotta tell ya i look at these photos and i can't help but laugh--- because in my mind i can see you working, sweat dripping off the end of your nose, --cussing every other breath---trying to put those little bitty parts together with those BIG AZZ HANDS All joking aside it Really looks great, Did you ever decide what to ask for it?
Hun
-
- Officer - Brigadier General
- Posts: 4336
- Joined: Thu Nov 20, 2008 12:42 pm
- Location: North Carolina,USA
Well my birthday is coming up..... HINT HINT
how much for one. hopefully i might get some bday money to get one. I WILL GET ONE so save one for me. plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
doesn't need to be painted i can do that. just make inexpensive for me. THANKS YOU ROCK OUT LOUD
how much for one. hopefully i might get some bday money to get one. I WILL GET ONE so save one for me. plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
doesn't need to be painted i can do that. just make inexpensive for me. THANKS YOU ROCK OUT LOUD
"Ever tried. Ever failed. No matter. Try Again. Fail again. Fail better."
--Samuel Beckett
--Samuel Beckett
-
- Officer - Brigadier General
- Posts: 2032
- Joined: Sat Dec 11, 2004 1:23 pm
- Location: California
-
- Officer - Brigadier General
- Posts: 9647
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
-
- Officer - Brigadier General
- Posts: 9647
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
It has come to my attention that with a full set of crew the base plate may start to sag. So if you have ordered one of my flaks you may have to shim up the center so that this does not happen. You could use a rod or dowl for this or a few pieces of styreen.
After you put the leveling pads on measure to the bottom of the trailer plate . It should be about 5/16 - 3/38 of an inch or so.
I will build this into further runs.
Let me know if you have any questions.
After you put the leveling pads on measure to the bottom of the trailer plate . It should be about 5/16 - 3/38 of an inch or so.
I will build this into further runs.
Let me know if you have any questions.
Last edited by pickelhaube on Tue Aug 25, 2009 5:32 am, edited 1 time in total.
-
- Officer - Captain
- Posts: 827
- Joined: Mon Sep 17, 2007 6:22 am
- Location: Central Florida
-
- Officer - Brigadier General
- Posts: 9647
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Hey Guys,
I am updating the 3 projects that I am doing at this time. Hopefully I will go into production with this flak gun the end of next week or if not the begining of week next.
When this flak came out there were quite a few people who were interested in it then the Monkey hit the fan. So I pressed on with the M-10
Now I have about 8 paid preorders for the flak gun and it is ready for molds and pouring.
As I have said in the other posts. I will finish the M-10 pour the Pavehawk then proceed with this.
Crane Driver will be the first to recieve the FIRST QUAD FLAK 38 IN OUR XD WORLD.
He came through with the 1/35 model when I offerd the SPECIAL DEAL and will recieve this at about half the price. WAY TO GO CRANE DRIVER
Thanks guys for the support.
Matthew
I am updating the 3 projects that I am doing at this time. Hopefully I will go into production with this flak gun the end of next week or if not the begining of week next.
When this flak came out there were quite a few people who were interested in it then the Monkey hit the fan. So I pressed on with the M-10
Now I have about 8 paid preorders for the flak gun and it is ready for molds and pouring.
As I have said in the other posts. I will finish the M-10 pour the Pavehawk then proceed with this.
Crane Driver will be the first to recieve the FIRST QUAD FLAK 38 IN OUR XD WORLD.
He came through with the 1/35 model when I offerd the SPECIAL DEAL and will recieve this at about half the price. WAY TO GO CRANE DRIVER
Thanks guys for the support.
Matthew
-
- Officer - 2nd Lieutenant
- Posts: 382
- Joined: Mon Jun 02, 2008 8:20 am
- Location: Way down south Mississippi
-
- Officer - Brigadier General
- Posts: 5405
- Joined: Tue Oct 05, 2004 9:46 am
- Location: SOUTH JOISEY
- Contact: