Page 1 of 1
SDKFZ 251/23 Turret
Posted: Tue Jan 16, 2018 4:34 pm
by pickelhaube
Hey Guys ,
Here a new topic to vote on.
I have been contact by several guys who want the 251 Hanomag with the Sdkfz type turret 251/23
It looks as a stop gap measure they did use original 222 turret on top of the.
This is good because that is done !!!
But as the war progressed they made a purposfull elongated turret.
The new turret had the same weapons system but it was elongated and the front and back were more streamlined omitting 2 of the facetts front and back.
What would you guys like ?
Original Sdkfz 222 turret
Purpase made elongated turret
The poll is for the guys who actually want this mod.
Re: SDKFZ 251/23 Turret
Posted: Wed Jan 17, 2018 7:04 am
by pickelhaube
Hmmmm......
Not a lot of interest.
Perhaps the days of these types of mods have come and gone .
It has been a while since I have looked into this mod and I have forgotten some of he key facts of the SDKFZ 251/23 .
First it was a concept that was to use the turret of the SDKFZ 234/1 8 rad ( 8 wheel ) .
This may or may not have happened . There is no record proof or pictures.
So it could be said that there was a possibility that either turrets could have been used.
Depending on the availabilty of both turrets.
So , here in modern times the only turret available in 1 1/8th is my Sdkfz 222 turret .
So that is the one I will choose.
Unless there turns out to be a big demand for the 234 style turret.
Re: SDKFZ 251/23 Turret
Posted: Wed Jan 17, 2018 7:21 am
by dannyc
The 222 turret would be best from what I have read that was the turret the prototype design had
Re: SDKFZ 251/23 Turret
Posted: Wed Jan 17, 2018 8:31 am
by Crazy Kraut
what turret is the right one for the Sdkfz140-1 Aufklaerer-38T ??
This is my next custom Project.
If I ever get my case with all the kits inside
Re: SDKFZ 251/23 Turret
Posted: Wed Jan 17, 2018 3:45 pm
by pickelhaube
Well with minimum work and frozen fingers I mounted the 22 turret on the 251 .
As mods go once you build the turret it will mount on the 251 in a matter of minutes .
All you have to do is snip off the rails along the walls and the roof in.
$45 plus shipping.
Re: SDKFZ 251/23 Turret
Posted: Wed Jan 17, 2018 3:46 pm
by pickelhaube
Re: SDKFZ 251/23 Turret
Posted: Wed Jan 17, 2018 4:13 pm
by normandy
Very nice Matthew! When your ready to take orders, 223 and these turret...let me know.
Great looking Kit!!!
Re: SDKFZ 251/23 Turret
Posted: Thu Jan 18, 2018 1:21 am
by Arkhan Prod
great job
I may look on ebay for a 251 ^^
Re: SDKFZ 251/23 Turret
Posted: Thu Jan 18, 2018 7:50 am
by Crazy Kraut
Re: SDKFZ 251/23 Turret
Posted: Thu Jan 18, 2018 7:57 am
by Crazy Kraut
Would like to vote 2times for the Purposely made turret
Re: SDKFZ 251/23 Turret
Posted: Mon Jan 29, 2018 5:13 pm
by pickelhaube
OK Guys,
For those who want this now is the time.
I sold a BUNCH on ebay and things are winding down.
I need to finish this run and the 222 because I need to get back on the HIND !!
Please get your orders in now because it will be months before I get back to it.
$45 plus shipping.
Re: SDKFZ 251/23 Turret
Posted: Sun Feb 11, 2018 10:04 am
by Crazy Kraut
Matthew,
do I need to order the 2 longer turret for the Sdkfz 251/23 in an offical way? If yes, please take this as an order.
Sven
Re: SDKFZ 251/23 Turret
Posted: Sun Feb 11, 2018 6:01 pm
by Razor17019
pickelhaube wrote:Well with minimum work and frozen fingers I mounted the 22 turret on the 251 .
As mods go once you build the turret it will mount on the 251 in a matter of minutes .
All you have to do is snip off the rails along the walls and the roof in.
Pickle,
What is the cost for one of these?
Razor
Re: SDKFZ 251/23 Turret
Posted: Sun Feb 11, 2018 9:35 pm
by pickelhaube
The turret and 251 roof plate sales for $45 plus $7 for shipping.
I am selling only the 222 turret at this time.
The longer version will be made after I get through all of the HIND kits.
Re: SDKFZ 251/23 Turret
Posted: Mon Feb 12, 2018 12:47 am
by Crazy Kraut
Matthew,
the 22 turret is fine for me and my customizing projects.
I´ll take 2 of them but did not need the 251 roof plate.
Will send you a PM
Thanks
Sven
Re: SDKFZ 251/23 Turret
Posted: Mon Feb 12, 2018 5:50 pm
by normandy
" The longer version will be made after I get through all of the HIND kits. "
Matthew if you make it I'll order one.
Re: SDKFZ 251/23 Turret
Posted: Wed Feb 14, 2018 6:30 pm
by normandy
Still working on the Pickelhaube 251/23 turret and not planned that its on the tan, green camo white 13 251...
great kit!
The elongated turret I made but Matthew does a better job!!!
The cannon, MG and seats are Pickelhaube made.
Re: SDKFZ 251/23 Turret
Posted: Wed Feb 14, 2018 9:02 pm
by pickelhaube
All kits are made packed and ready to ship.
All 251 turrets ,222 and 223 sales have been pulled off of e-bay and it is time to get back on the HIND .
I will keep my concrete barriers up on ebay because they are made from left over resin.
Re: SDKFZ 251/23 Turret
Posted: Sat Mar 31, 2018 1:06 pm
by normandy
I got a little more done on the 251/23, the pic not the best but it gives an idea of how the turret looks
on the vehicle. Haven't put the cage on yet....
Re: SDKFZ 251/23 Turret
Posted: Sat Mar 31, 2018 4:38 pm
by pickelhaube
It takes on a whole other look with the turret.
Sharp looking camo .
Must have taken some time.
Re: SDKFZ 251/23 Turret
Posted: Sat Mar 31, 2018 5:40 pm
by Axis Nightmare
normandy wrote:I got a little more done on the 251/23, the pic not the best but it gives an idea of how the turret looks
on the vehicle. Haven't put the cage on yet....
Great paint job!
Re: SDKFZ 251/23 Turret
Posted: Sun Apr 01, 2018 6:34 pm
by normandy
This is the 21st 251 I used, I can't remember the series. Anyway its the white 13 with the white
Grossdeutschland Division marking on it and green dark yellow camo. I removed the 13 and the
white GD emblem and I added the red brown, green and dark yellow as needed.
Re: SDKFZ 251/23 Turret
Posted: Sun Apr 01, 2018 6:35 pm
by normandy