1/18 Ho-229 Project Build ( Retired ) !!
-
- Officer - Brigadier General
- Posts: 9648
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Re: 1/18 Ho-229 Prototype Progress Pics 9-11
I almost have the end caps done. With some teaking and few little details that I need to add , they will be done.
I have little pegs in the back of the caps that fit into the aligning holes of the wings.
A couple of guys have asked if I would sell the kit without the wings. By making these end caps the wingless version will be available
This way you can display the 229 without the wings and put it on a shelf.
Also by going wingless, this is the condition that the Americans found this wonder weapon and it can be displayed just as they found it . That will take the fantasy element out of the ole' gal .
Just think of the dio possibilities
I have little pegs in the back of the caps that fit into the aligning holes of the wings.
A couple of guys have asked if I would sell the kit without the wings. By making these end caps the wingless version will be available
This way you can display the 229 without the wings and put it on a shelf.
Also by going wingless, this is the condition that the Americans found this wonder weapon and it can be displayed just as they found it . That will take the fantasy element out of the ole' gal .
Just think of the dio possibilities
Last edited by pickelhaube on Sat Sep 24, 2011 9:44 pm, edited 2 times in total.
-
- Officer - Captain
- Posts: 678
- Joined: Fri Mar 27, 2009 3:45 am
- Location: Houston, Texas
- Contact:
Re: 1/18 Ho-229 Prototype Progress Pics 9-24
man o man, that's gorgeous! GREAT WORK!
-
- Officer - Brigadier General
- Posts: 6028
- Joined: Mon Oct 04, 2004 6:30 pm
- Location: Atlantic Coast
Re: 1/18 Ho-229 Prototype Progress Pics 9-24
Dang Pickel, ou+s+anding! I+ will be nice +o have +he choise.....wings or no+.
I can'+ wai+, +his is going +o be a grea+ ki+! (keyboard s+ill messed up, no le++er "+")
I can'+ wai+, +his is going +o be a grea+ ki+! (keyboard s+ill messed up, no le++er "+")
Re: 1/18 Ho-229 Prototype Progress Pics 9-24
normandy wrote:Dang Pickel, ou+s+anding! I+ will be nice +o have +he choise.....wings or no+.
I can'+ wai+, +his is going +o be a grea+ ki+! (keyboard s+ill messed up, no le++er "+")
M4n, 0h m4n, y0u n33d t0 g3t a n3w k3yb04rd...
But i am very impressed with the endcaps.
Great work.
E-mail(And MSN Messenger): [email protected]
-
- Officer - Brigadier General
- Posts: 9648
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Re: 1/18 Ho-229 Prototype Progress Pics 9-24
Well I think that I have the wing about 99% done.
I just need to dress up the nav light area and it is a wrap.
I finished the ailerons and flaps with their panel lines.
Slowly but surely she is getting done.
Hell or high water she will be done for Christmas.
Things left to .
Finish cockpit area
finish main wheel wells
finish wing caps.
fine tune everything.
After this is all done prep parts for casting.
I just need to dress up the nav light area and it is a wrap.
I finished the ailerons and flaps with their panel lines.
Slowly but surely she is getting done.
Hell or high water she will be done for Christmas.
Things left to .
Finish cockpit area
finish main wheel wells
finish wing caps.
fine tune everything.
After this is all done prep parts for casting.
-
- Officer - Brigadier General
- Posts: 2124
- Joined: Mon Dec 13, 2010 1:46 am
- Location: California
- Contact:
Re: 1/18 Ho-229 Prototype Wings almost Done !! Pics 9-
WOW!! Are you doing movable flaps?
-
- Officer - Brigadier General
- Posts: 9648
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Re: 1/18 Ho-229 Prototype Wings almost Done !! Pics 9-
Negative .Jnewboy wrote:WOW!! Are you doing movable flaps?
But you can pose them.
-
- Officer - Brigadier General
- Posts: 2124
- Joined: Mon Dec 13, 2010 1:46 am
- Location: California
- Contact:
Re: 1/18 Ho-229 Prototype Wings almost Done !! Pics 9-
I know alittle trick that will make them movable
you attach the flap to the wing with a little pin that can be removed from both the flap and the wing
make two sets of pins, one set it straight great for in flight look (hanging up)
the other set is bent at around a 45 degree angle, (flaps all down - wheels down look)
-
- Officer - Brigadier General
- Posts: 9648
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Re: 1/18 Ho-229 Prototype Wings almost Done !! Pics 9-
Jnewboy wrote:
I know alittle trick that will make them movable
you attach the flap to the wing with a little pin that can be removed from both the flap and the wing
make two sets of pins, one set it straight great for in flight look (hanging up)
the other set is bent at around a 45 degree angle, (flaps all down - wheels down look)
Or you can get r/c hinges. But that will be up to the builder.
My full builds will be static. In line or posed. Buyers choice.
Remember I am trying to keep the price down.
I had all intentions of making this as simple as possible.
That ain't working so well.
Last edited by pickelhaube on Tue Sep 27, 2011 1:03 pm, edited 1 time in total.
-
- Officer - Brigadier General
- Posts: 4336
- Joined: Thu Nov 20, 2008 12:42 pm
- Location: North Carolina,USA
Re: 1/18 Ho-229 Prototype Wings almost Done !! Pics 9-
Yea, I would probably get RC hinges. I want one soooo bad!!!!!!
"Ever tried. Ever failed. No matter. Try Again. Fail again. Fail better."
--Samuel Beckett
--Samuel Beckett
-
- Officer - Brigadier General
- Posts: 6028
- Joined: Mon Oct 04, 2004 6:30 pm
- Location: Atlantic Coast
Re: 1/18 Ho-229 Prototype Wings almost Done !! Pics 9-
Pickel, did you say prep par+s for Cas+ing?........... I am so psyched abou +his 229, I can'+ wai+.
You've done a fan+is+ic job, I dare say a mas+er piece!
You've done a fan+is+ic job, I dare say a mas+er piece!
-
- Officer - Brigadier General
- Posts: 4336
- Joined: Thu Nov 20, 2008 12:42 pm
- Location: North Carolina,USA
Re: 1/18 Ho-229 Prototype Wings almost Done !! Pics 9-
I agree, i+ is really swee+!!!!!! LOL
"Ever tried. Ever failed. No matter. Try Again. Fail again. Fail better."
--Samuel Beckett
--Samuel Beckett
-
- Officer - Brigadier General
- Posts: 2124
- Joined: Mon Dec 13, 2010 1:46 am
- Location: California
- Contact:
Re: 1/18 Ho-229 Prototype Wings almost Done !! Pics 9-
When its complete you should submit a summary story to FSM magazine or others, I know this project will make the cover!
-
- Officer - Brigadier General
- Posts: 3544
- Joined: Tue Sep 18, 2007 6:59 pm
- Location: Villa Rica, GA
Re: 1/18 Ho-229 Prototype Wings almost Done !! Pics 9-
I'm with Jnewboy on that. You really should.Jnewboy wrote:When its complete you should submit a summary story to FSM magazine or others, I know this project will make the cover!
Re: 1/18 Ho-229 Prototype Wings almost Done !! Pics 9-
I concur
Corey
Good Trader Report:
Dauntless-----------------------[Cat]CplSlade
Jlspec
Pickelhaube
Axis nightmare
Flyboy_fx
Good Trader Report:
Dauntless-----------------------[Cat]CplSlade
Jlspec
Pickelhaube
Axis nightmare
Flyboy_fx
-
- Officer - Brigadier General
- Posts: 4336
- Joined: Thu Nov 20, 2008 12:42 pm
- Location: North Carolina,USA
Re: 1/18 Ho-229 Prototype Wings almost Done !! Pics 9-
Yea dude. You gonna get the foshizle muh nigga pimpin bidness goin!!! LOL
"Ever tried. Ever failed. No matter. Try Again. Fail again. Fail better."
--Samuel Beckett
--Samuel Beckett
-
- Officer - Captain
- Posts: 678
- Joined: Fri Mar 27, 2009 3:45 am
- Location: Houston, Texas
- Contact:
Re: 1/18 Ho-229 Prototype Wings almost Done !! Pics 9-
Amen, brother!pickelhaube wrote:
I had all intentions of making this as simple as possible.
That ain't working so well.
I know there's a developing sense of urgency as you get to the point where you can see that little light at the end of the tunnel. I know you won't let your legions of fans make you go faster than you should. Just like Michelangelo ignored Pope Julius II hollering up from the floor of the Sistine Chapel, you'll just keep creating your masterpiece. We're just lucky you let us come in and peek around the scaffolding to see you work ...
Re: 1/18 Ho-229 Prototype Wings almost Done !! Pics 9-
I have no doubt that FSM would do an article on this build. Now that would really spread the word about this fantastic kit. Stunning work.
"What a magnificent aeroplane! They could have all their Spitfires and Mustangs!"
Roland "Bee" Beamont, Tempest Wing Commander
Roland "Bee" Beamont, Tempest Wing Commander
-
- Officer - Brigadier General
- Posts: 2124
- Joined: Mon Dec 13, 2010 1:46 am
- Location: California
- Contact:
Re: 1/18 Ho-229 Prototype Wings almost Done !! Pics 9-
Yep, and just think, you get the issue, frame it, and hang it on the wall next to where your Horton is hanging! or next to where the area you have it wheels down on display!Airacobra wrote:I have no doubt that FSM would do an article on this build. Now that would really spread the word about this fantastic kit. Stunning work.
Mathew I think you have a winner here. As soon as I get mine I intend on starting it so I will have pictures of the finished product if you need them.
-
- Officer - Brigadier General
- Posts: 6028
- Joined: Mon Oct 04, 2004 6:30 pm
- Location: Atlantic Coast
Re: 1/18 Ho-229 Prototype Wings almost Done !! Pics 9-
Jon, I think thats a great idea......and would make a hell of a cover story.
It might just wake up the 1:18 sleeping giants. That would give Pickel a lot more work. I think thats what the flykid was saying.....
.......and I thought my keyboard was broken.
It might just wake up the 1:18 sleeping giants. That would give Pickel a lot more work. I think thats what the flykid was saying.....
flyboy_fx wrote:Yea dude. You gonna get the foshizle muh nigga pimpin bidness goin!!! LOL
.......and I thought my keyboard was broken.
Re: 1/18 Ho-229 Prototype Wings almost Done !! Pics 9-
Top Shelf work there Spikedude ...will start printing out Decals very soon and get them in mail ASAP... justa a lazy phuk I am ....TJJ
ya gonna pull them pistols or whistle Dixie
-
- Officer - Brigadier General
- Posts: 9648
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Re: 1/18 Ho-229 Prototype Wings almost Done !! Pics 9-
Jackson wrote:Top Shelf work there Spikedude ...will start printing out Decals very soon and get them in mail ASAP... justa a lazy phuk I am ....TJJ
That is great news.
One more thing that is getting done !!!!
Yep Normandy I said it. Prep for casting.But please do not start holding your breath.
As far as Fine Scale Modeling goes that has always been a dream of mine . To submit my stuff and have an article made of it .But I am sure that will never happen.
Guys who submit those articles are well rounded master modelers. My skills are limited ( if I can say I have any ) I love the build portion of modeling .That is what I would say my skills are limited in. My finishing skills are getting better.
Even as a kid I would build a model slap decals on in and call it done. I think my skills as a finisher would get better with time. But that is what I do lack , time.
I do my best to get product out so you guys can have the fun in building your own projects. I do have some dear friends who help me out in building my kits for me !! And other friends who make accoutrements that accent my kits.
Thank you guys for that.
These guys are the one's who should contribute their modeling skills to FSM.
-
- Officer - Brigadier General
- Posts: 4336
- Joined: Thu Nov 20, 2008 12:42 pm
- Location: North Carolina,USA
Re: 1/18 Ho-229 Prototype Wings almost Done !! Pics 9-
Pickle dude... Like it would hurt to try????????????????/
http://www.finescale.com/The%20Magazine ... azine.aspx
We all beg you to do it! Well, I do.
You don't have to finish/paint it. Just show the assembled unpainted resin kit!!! I bet you could sell quite a few of these. I mean, A FREAKING 1/18 SCALE RESIN HO229 FOR $300!!!! 0_0 I mean. CHINA can't do it that affordable.
I think you should do it! It would be just an amazing thing to see it on the front page of FSM! Ibet it would make it there too.!!!
http://www.finescale.com/The%20Magazine ... azine.aspx
We all beg you to do it! Well, I do.
You don't have to finish/paint it. Just show the assembled unpainted resin kit!!! I bet you could sell quite a few of these. I mean, A FREAKING 1/18 SCALE RESIN HO229 FOR $300!!!! 0_0 I mean. CHINA can't do it that affordable.
I think you should do it! It would be just an amazing thing to see it on the front page of FSM! Ibet it would make it there too.!!!
"Ever tried. Ever failed. No matter. Try Again. Fail again. Fail better."
--Samuel Beckett
--Samuel Beckett
-
- Officer - Brigadier General
- Posts: 6028
- Joined: Mon Oct 04, 2004 6:30 pm
- Location: Atlantic Coast
Re: 1/18 Ho-229 Prototype Wings almost Done !! Pics 9-
Pickel,
.........too late dude, I've already turned blue...................
Matthew, you have to do this, the quality of your work needs to be seen by others.
As I said above, this 229 project might wake up the sleeping 1:18 giants.
Your custom work over the years has been geared towards the modeler / collector, you've done polls.......thats something they should look into.
With the portfolio of 1:18 projects you have, you could make a few submissions to FSM or others. By doing so you'd expose more people to the 1:18 scale that many folks don't know about......not to mention that when the Luft '46 guys see this (229) their gonna sh!+.
The finished model....you could take Jon up on his offer or other members. I hope you do this, it would be a fitting end to this project.
Normandy.
pickelhaube wrote:
Yep Normandy I said it. Prep for casting.But please do not start holding your breath.
.........too late dude, I've already turned blue...................
Matthew, you have to do this, the quality of your work needs to be seen by others.
As I said above, this 229 project might wake up the sleeping 1:18 giants.
Your custom work over the years has been geared towards the modeler / collector, you've done polls.......thats something they should look into.
With the portfolio of 1:18 projects you have, you could make a few submissions to FSM or others. By doing so you'd expose more people to the 1:18 scale that many folks don't know about......not to mention that when the Luft '46 guys see this (229) their gonna sh!+.
The finished model....you could take Jon up on his offer or other members. I hope you do this, it would be a fitting end to this project.
Normandy.
-
- Officer - Brigadier General
- Posts: 1581
- Joined: Tue Oct 05, 2004 7:23 pm
- Location: USA
- Contact:
Re: 1/18 Ho-229 Prototype Wings almost Done !! Pics 9-
Matthew that is looking damn good!
Positive B/S/T refs: hworth18, coreyeagle48, raiderad6, pickelhaube, JOC, american_grenadier, xddave, tmanthegreat