TRU's Exclusive Tank and AAV playsets
-
- Officer - Brigadier General
- Posts: 6374
- Joined: Fri Mar 21, 2008 3:16 pm
- Location: Orlando FL
TRU's Exclusive Tank and AAV playsets
The mind is the limit. As long as the mind can envision the fact that you can do something, you can do it, as long as you really believe 100 percent.
-
- Officer - Brigadier General
- Posts: 2032
- Joined: Sat Dec 11, 2004 1:23 pm
- Location: California
Re: TRU's Exclusive Tank and AAV playsets
love it hopefully it will be in my area..
i need one..
whats up doc....
-
- Officer - Brigadier General
- Posts: 11238
- Joined: Tue Oct 05, 2004 7:38 pm
- Location: Central California
-
- Officer - Brigadier General
- Posts: 2022
- Joined: Wed Nov 12, 2008 12:33 pm
- Location: USA
i looked at the AAV in some detail a while ago, from pictures and it is very good in length and height. About 1/19 iirc. But i suspect it will be way narrow, on the order of 2/3 what it should be.
That's not going to stop me from getting one.....probably the only one we'll see close to this scale unless Bravo Team really surprises.
I'm just as keen on getting the Wespe look alike they made in the same soldier force vi series. It only needs to be a little over 10 inches long to be to scale and from the pics it looks about that size.
The tank i don't know about. Certainly small. The turret actually looks pretty scale but the hull is too small for the turret. The chap mei merkava was like that too.
The best thing to do, although a bit expensive, might be to put the chap mei turret on the power team chinese tank hull. The hull of the power team tank was much closer to scale and pretty similar to a t-72 hull. The turret is of a totally different design, though. Since the chap mei turret seems to be to scale it might be a good match.
That's not going to stop me from getting one.....probably the only one we'll see close to this scale unless Bravo Team really surprises.
I'm just as keen on getting the Wespe look alike they made in the same soldier force vi series. It only needs to be a little over 10 inches long to be to scale and from the pics it looks about that size.
The tank i don't know about. Certainly small. The turret actually looks pretty scale but the hull is too small for the turret. The chap mei merkava was like that too.
The best thing to do, although a bit expensive, might be to put the chap mei turret on the power team chinese tank hull. The hull of the power team tank was much closer to scale and pretty similar to a t-72 hull. The turret is of a totally different design, though. Since the chap mei turret seems to be to scale it might be a good match.
i never met an airplane i didn't like...
What 'tank' were you referring to?...the Wespe?..if so, it should be small. Around 10 1/2 inches.
the turret of the t-72 looks to be fine to me. The turret on real t-72's is small. The hull is the problem, but the PTE chinese tank's hull will work very nicely and is much larger.
The AAV has to be larger than the FOV sherman. I can tell just by looking at the pictures it's at least 15-16 inches long and the FOV sherman would be about 13.
the turret of the t-72 looks to be fine to me. The turret on real t-72's is small. The hull is the problem, but the PTE chinese tank's hull will work very nicely and is much larger.
The AAV has to be larger than the FOV sherman. I can tell just by looking at the pictures it's at least 15-16 inches long and the FOV sherman would be about 13.
i never met an airplane i didn't like...
well, there are pics of the tank on the joecustoms forum and the figure in the turret looks pretty good in size comparison....the turret really doesn't look too small. But the hull is 2/3 the size it should be. I still think the chap mei turret will look good on the PTE chinese tank hull.
i never met an airplane i didn't like...
-
- Officer - Brigadier General
- Posts: 11238
- Joined: Tue Oct 05, 2004 7:38 pm
- Location: Central California
I saw these yesterday as well. Overall, they looked much smaller than I expected, even from the pictures. The turret on the tank is perhaps aproximately the size it needs to be for a T-72, but is still too small. The tank hull is far too tiny. The AAVP is too narrow the overall proportion are too small. The AAVP is actually a rather large vehicle - look at pictures of the FOV 1:32 version with the figures riding on it to get a better estimate of the actual size should be. It is a large vehicle and stands taller (and nearly wider) than an M1 Abrams.
"If you fail to plan, you plan to fail."
those are great pics, thanks.
It's about the size i figured it would be. It's really not that bad in height and length.......it's just the width. It's about 2/3 what it should be. But i think i can live with that; i'll know when i see it in person, i guess. Very little chance we'll ever get anything closer in scale.
I still think the t-72 turret will look good on the PTE hull.
So nobody has seen the little Wespe then? I wonder if they maybe didn't bring it into the True Heroes line. That would be disappointing.
How much was the AAV by the way? Do you remember?
It's about the size i figured it would be. It's really not that bad in height and length.......it's just the width. It's about 2/3 what it should be. But i think i can live with that; i'll know when i see it in person, i guess. Very little chance we'll ever get anything closer in scale.
I still think the t-72 turret will look good on the PTE hull.
So nobody has seen the little Wespe then? I wonder if they maybe didn't bring it into the True Heroes line. That would be disappointing.
How much was the AAV by the way? Do you remember?
i never met an airplane i didn't like...
-
- Officer - Brigadier General
- Posts: 11238
- Joined: Tue Oct 05, 2004 7:38 pm
- Location: Central California
i gather you didn't buy the aav or tank. I think i'm definitely going to get both. I hope i can live with the narrowness of the aav. I think it's such a cool vehicle. I wonder if it floats?...doubtful but maybe with the troop compartment full of styrofoam it might. And how come chap mei can make this big vehicle, and have an opening troop compartment, for $24.99 but FOV can't make their similarily priced LAV with an opening troop compartment?
I expect the wespe to be the same as the aav. Pretty close to the right size, length and height but narrow. If it's usable i'm going to get a whole battery of them.
I expect the wespe to be the same as the aav. Pretty close to the right size, length and height but narrow. If it's usable i'm going to get a whole battery of them.
i never met an airplane i didn't like...
new TRU vehicles
Aferg, I was thinking the same thing about this compared to the LAV. I think dollar for dollar the AAV may be better. Anyway, for all US customers, free shipping on it now:
http://www.toysrus.com/product/index.js ... Id=3557185
http://www.toysrus.com/product/index.js ... Id=3557185
-
- Officer - 2nd Lieutenant
- Posts: 360
- Joined: Tue Oct 05, 2004 10:13 am
- Location: NE Chicagoland, Illinois
Six Tops
From the pics/comments in this post:aferguson wrote:with the aav's length, i bet you can put a fair number of figures in the back too. Probably at least 6 and maybe 8. Compare that to 3 for the FOV Bradley and zero for the LAV. You can see into the back of the aav in the pics in the joescustoms link.
http://www.joecustoms.com/forums/viewto ... 10&t=18500
...it really looks like even 6 figs is going to be a squeeze. Which really bums me out b/c my G.I. Joe Warthog also resembles the same real life vehicle, and has three opening hatches which figs can actually be placed down inside of, and can comfortably fit 7-8 in the troop compartment. Granted this thing captures the overall look better, but it's really just a shell with not much else going on.
Still, as you said, we're almost certainly never going to get anything better in 1:18 for this vehicle, so I may have to give in and get one.
interesting review. Some of his beefs i don't really care about and i disagree that it is over priced. He should buy an FOV LAV if he wants to see something that's overpriced.
For a toy it's good value i think. Most kids would love the cannon with electronic sounds. The molded figure looks good to me.....sort of the higher quality that their molded sniper figure has....to me that figure is a bonus. I'll happily pay $25 for one of these aav's to customize a bit.
Interesting he didn't comment on the narrowness, but i guess after the piddly warthog this seems huge. Holding 5-6 figures is still pretty good and much better than the fov bradley and lav, the crew area didn't go as deep as i figured it would.
The lines are good and overall i would say it's about 1/20 scale, better than that in length and height, which i can live with.
Oh, and i plan to make mine float.
For a toy it's good value i think. Most kids would love the cannon with electronic sounds. The molded figure looks good to me.....sort of the higher quality that their molded sniper figure has....to me that figure is a bonus. I'll happily pay $25 for one of these aav's to customize a bit.
Interesting he didn't comment on the narrowness, but i guess after the piddly warthog this seems huge. Holding 5-6 figures is still pretty good and much better than the fov bradley and lav, the crew area didn't go as deep as i figured it would.
The lines are good and overall i would say it's about 1/20 scale, better than that in length and height, which i can live with.
Oh, and i plan to make mine float.
i never met an airplane i didn't like...