M-113 APC Upgrade With New Molds

immeww2 · Post by **immeww2** » Sat Feb 07, 2009 11:27 pm

Looks awesome!!

Birddog · Post by **Birddog** » Sun Feb 08, 2009 11:14 pm

Thought I'd put this update here too....

Didn't get to finish up my M60s and shields, but I did take some pictures of the turret armor with a figure in place.

As I stated before in my previous post, you'll need to leave the 50 Cal and shield removable to insert and remove a figure in the turret.

I put the figure in a kneeling type position as seen in the picture below. This allowed the turret to swivel 360 degrees without the figure's legs/feet interfering with anything inside the M113. There is still room to have the figure sit a bit lower if needed.

Once the figure is in place, simply put the 50 Cal and shield back in place:

I'll post more pictures once I finish the M60s and their shields.

Hope you enjoy.

Birddog · Post by **Birddog** » Mon Feb 09, 2009 9:09 pm

Would any of you be interested in storage racks for your M113s like the ones pictured below?

These would be perfect to add along with the shield kit to your M113 for those interested in a more modern looking M113.

pickelhaube · Post by **pickelhaube** » Mon Feb 09, 2009 9:55 pm

This could could be doable . Would anyone esle want one ?

pickelhaube · Post by **pickelhaube** » Tue Feb 10, 2009 7:09 am

There has been a lot going on latley. Monkey D sales , people blowing there horns about 21st demise and the clearing out of warehouses and what not. Bird Dog has a great idea about going with Mr. Pierce's idea of the M-113 upgrade.

Would anybody else like to have these side storage/ anti rocket side rails ? If so let me know. They do look cool on a Desert Storm APC and my turret and shield will work with them.

They used my style .50 cal shield and the one in the pics. So both will work.

Let me know it there is interest.

Birddog · Post by **Birddog** » Tue Feb 10, 2009 7:53 am

You know I'm on board....

billgiff · Post by **billgiff** » Tue Feb 10, 2009 2:24 pm

I mentioned this external rack idea a few weeks ago. I would definately get one and maybe another for a Bradley. If you make the racks, I would also be interested in another ACAV set. Then I would just need to hunt down a second M113.

Aviatornut.com · Post by **Aviatornut.com** » Tue Feb 10, 2009 3:50 pm

Matthew
i want a set and i would be interested in the modern rack set up also

pickelhaube · Post by **pickelhaube** » Wed Feb 11, 2009 12:40 pm

Aviatornut.com wrote:Matthew
i want a set and i would be interested in the modern rack set up also

OK same response as the pop in windows for the Pavehawk. 3 guys want the storage racks for the M-113 . When I get at least 5 guys interested I usually do the project. If less, it is a LOT of work for a little pay off. Anbody else ? If not , moving on.

pickelhaube · Post by **pickelhaube** » Wed Feb 11, 2009 10:00 pm

Looks like there is a lot of Monkey play going on.

Last call to see if anyone else is interested in the storage racks for the M-113

Castroww · Post by **Castroww** » Sun Oct 21, 2012 8:47 pm

Hey PH, are you still looking for people to off the storage racks? I would like to grab a set of your armour upgrades.

pickelhaube · Post by **pickelhaube** » Mon Oct 22, 2012 7:26 am

Wow , talk about a blast from the past !!

I was geared up to do the rails but there was not a lot of interest.

I also upped the anti from 5 to 10 guys who would want a certain project.

By going with 5 guys the project never pays for itself.

it is kind of a drag to put in time and money only to break even and not make a dime.

That is why I went up to 10 conformations.

tmanthegreat · Post by **tmanthegreat** » Mon Oct 22, 2012 12:46 pm

Speaking of the M-113, PH, do you still have the toolings for that MG turret shield for the M-113? I really need to customize my Vietnam version into something more appropriate than a late model M113-A3 painted green...

rschaap · Post by **rschaap** » Mon Oct 22, 2012 9:56 pm

I would go for an amour upgrade and two sets of storage racks.

rohirrimknight · Post by **rohirrimknight** » Tue Oct 23, 2012 6:30 am

Hi, one set of storage/ anti rocket side rails for my M113 with the same desert color.

pickelhaube · Post by **pickelhaube** » Tue Oct 23, 2012 2:39 pm

You know guys I have been looking at this mod real hard.

I have a different perspective than I had 3 years ago.

3 years ago I was thinking of making the whole rack in one piece . .

But I was not sure how it would turn out.

Those rails would have been crazy flimsy.

Well what if i just make the bottom floor and cast the vertical post ?

The rails could be made out of strip styrene or brass !

That way the rails will be strong enough.

That would make this a crazy simple mod.

Est price $25-$30 .

How does that sound ?

There will be about $6-$8 dollars worth of store bought styrene or brass in it.

Opinions ?

Does anybody have any detail pics of the rack ?

Castroww · Post by **Castroww** » Tue Oct 23, 2012 7:13 pm

I'm down for a full set of rails along with the armour upgrades.

I like the new way, may hold up better than the previous design. Either way I'm in.

Castroww · Post by **Castroww** » Tue Oct 23, 2012 7:47 pm

This armour system is used on the M113 APC, M1126 Stryker.

rschaap · Post by **rschaap** » Wed Oct 24, 2012 8:09 am

This is what I could find on the M113 APC upgrade with storage rack.

http://www.scalehobbyist.com/manufactur ... hp?man=emh

http://www.armorama.com/modules.php?op= ... _id=127336

pickelhaube · Post by **pickelhaube** » Fri Oct 26, 2012 6:55 am

Thanks R S !!

It seems that the above storage racks are not accurate. There should be only 4 horizontal bars not 7 or so shown.

That would indeed make this rack easier to do . Does anybody know what the floor of the rack is constructed of ? Maybe the stretched screen material ?

This would be the rack that I would make.

Any feedback on that ?

pickelhaube · Post by **pickelhaube** » Fri Oct 26, 2012 6:57 am

Birddog · Post by **Birddog** » Sat Oct 27, 2012 11:18 am

Cool to see this thread resurface. I'm in if you build them.

rohirrimknight · Post by **rohirrimknight** » Tue Oct 30, 2012 7:52 am

I am in too.

pickelhaube · Post by **pickelhaube** » Tue Oct 30, 2012 11:23 am

Alright guys this will go on the list of thing to make !!

Apache26 · Post by **Apache26** » Thu Nov 08, 2012 11:52 am

Pickelhaube, I just joined the forum because I saw this thread. I am in the process of dumping 1/6 and getting into 1/18. I've been looking for M-113 conversion items and tips.

Do you still have the Vietnam era M-113 ACAV commander's cupola and gunshield available? How much are they? I'd really prefer not to try and make my own. Thanks!

Small Scale Military Headquarters

M-113 APC Upgrade With New Molds

Re: M-113 APC upgrade, last call for storage rack custom

Re: M-113 APC upgrade, last call for storage rack custom

Re: M-113 APC upgrade, last call for storage rack custom

Re: M-113 APC upgrade, last call for storage rack custom

Re: M-113 APC upgrade, last call for storage rack custom

Re: M-113 APC upgrade, last call for storage rack custom

Re: M-113 APC upgarde, 3 Years Later Storage Rack Interest

Re: M-113 APC upgarde, 3 Years Later Storage Rack Interest

Re: M-113 APC upgarde, 3 Years Later Storage Rack Interest

Re: M-113 APC upgrade, 3 Years Later Storage Rack Interest

Re:

Re: M-113 APC upgrade, 3 Years Later Storage Rack Interest

Re: M-113 APC upgrade, 3 Years Later Storage Rack Interest

Re: M-113 APC upgrade, 3 Years Later Storage Rack Interest

Re: M-113 APC upgrade, 3 Years Later Storage Rack Interest