Small Scale Military Headquarters

Posted: **Fri Jul 31, 2015 2:44 am**

Absolutely awesome!

I suspect Christmas might be coming this year a little early...

Posted: **Sun Aug 02, 2015 7:34 pm**

Main Landing gear painted.

Rough cut openings.

Canopy track

2mm trim around cockpit

Epoxied the wing spar in one side of the fuselage. Back spray on the cockpit and landing gear bay.

Wing X4 attachments and mounting screws. I decided to use 5/64 drill for the X4 pylon mounts instead of gluing the pylons to the wings. The wing mount screws were drilled with a #59 bit and counter sunk with a 5/64 bit.

Trimmed the vacuum formed canopy acrylic as close to fit then used a dremel sanding band to get the final fit. After painting I will use Super-Gold glue to set them into place. The Super-Gold will not frost the acrylic like normal super glue will.

Posted: **Fri Aug 07, 2015 2:16 am**

Nathan, this is going to be a very cool looking model!

Posted: **Sat Aug 22, 2015 10:23 am**

On the canopy I ran a thin piece of styrene .9mm wide x .41mm thick around the edge of the canopy to provide a stop for the clear acrylic.

A little heat from a hair dryer helped shape the gear door piece.

Quick video of laying up a fuselage half in 20 seconds.
http://vid753.photobucket.com/albums/xx ... msxzjw.mp4

Paint stand

Primed Plane getting ready to go into paint. I added the pitot tube on the wing to match buyers photograph.

Posted: **Sat Aug 22, 2015 1:59 pm**

looks great!!

Posted: **Sat Aug 22, 2015 5:46 pm**

Just fantastic Nathan. The video only shows part of the process that goes into a project like this,
there is so much more. Nathan thank you for making the 183, I can't wait to get started on it.

Posted: **Sun Aug 23, 2015 1:28 am**

Wow this is coming along really nicely, Well Done Mate.

Posted: **Sun Aug 23, 2015 9:57 am**

That is one fantastic model you have made. Great job !!!!!

Posted: **Sat Aug 29, 2015 6:18 pm**

AWSOME work Nathan !!!

Steve

Posted: **Sun Aug 30, 2015 10:19 am**

Excellent job. Looking forward to the painting scheme. To me this is one of the most difficult part of the build.

Posted: **Wed Sep 02, 2015 3:56 pm**

pizzaguy wrote:Looking for thoughts on a Focke Wulf TA-183 Huckebein. I was watching a show on the history channel and seen the 183. Obscure little jet. I've been wanting to cut my teeth on a small project. The Komet seamed to be a natural choice, but I read about it being developed by Merit or Pegasus.

The 1/18 scale would be 21" wing span x 20" length.

I would like to make the kit from fiberglass. Few parts from resin and the gear in metal.

I want to keep it simple. No flashing lights. Non-functioning surfaces. Static gear.

The original 1945 project was terminated before an actual aircraft could be produced, so how does everyone feel about making a plane that didn't really exist?

I haven't looked back threw old threads, so if anyone is planning to build one let me know and I'll look at something else. I don't want to step on toes. At this point it's just a dream. I have nothing invested.

Check your messages please. I want to buy some stuff from you.
:blueangel:

Posted: **Wed Sep 02, 2015 6:17 pm**

First...That is Fantastic

Second, from some of the different angle shots you can sure see how the leap to the MiG-15 and F-86 happened in such a short time and where they got their shapes!

Posted: **Fri Sep 04, 2015 9:24 pm**

Made some progress over the week. Between getting the kids back in school, sports and moving my daughter it's been a tough week.
I was able to get some pre-shading done

Base coat of sand beige. The pre-shading is coming through just a little.

Some brown base for the camo

RLM 81/83

RLM 81 over the brown. The vinyl stencils have been removed for the white background for the decals. Black stencils added and painted. Once everything is dry a coat of Future was lightly sprayed on left to dry for 24hrs. The Future will be a good base for the decals.

Post Shading
Before:

After:

The next pics will be of the decals added and dull coat applied. Thanks

Posted: **Sat Sep 05, 2015 6:00 am**

That looks great Nathan.

Posted: **Sat Sep 05, 2015 7:08 am**

That is beyond awesome. Great work!!

Posted: **Sat Sep 05, 2015 7:34 am**

Coming along very nicely. I like it.

Posted: **Sat Sep 05, 2015 10:20 am**

Loving that paint scheme.

Posted: **Sat Sep 05, 2015 9:19 pm**

Fantastic, amazing work! Professional and perfect.

Can't wait for my example

Posted: **Sun Sep 06, 2015 6:36 am**

Looks very nice !!!

Posted: **Mon Sep 07, 2015 2:24 pm**

One Down!! Ye Olde Finn your Ta183 is complete. You can pick it up in the customer service department at your convenience.

Hope you like.

http://i753.photobucket.com/albums/xx17 ... d31ahz.jpg[/img]

Posted: **Mon Sep 07, 2015 4:56 pm**

Wow, thats a fantastic looking model!! I like the paint scheme and
the detail you've put into this kit is amazing, Well Done!

Posted: **Tue Sep 08, 2015 9:49 am**

Well Nathan, you have totally exceeded my expectations!

The first photo looks EXACTLY like the computer generated image I sent you for the camojob template, incredible.

All the detailing is also really well done - including the cockpit.

All said - Absolutely Awesome Job - and thank you again for creating this stunning custom model!

Regards, Juha
aka. Ye Olde Finn

Posted: **Tue Sep 08, 2015 10:17 am**

Excellent work. How much is it again

?

Posted: **Tue Sep 08, 2015 12:40 pm**

Full kits $290 +sh
Full build $475+sh

I have a full build and two kits to complete. One maybe full build. I would like to do a couple more kits and maybe a full build before I wrap up this project and move onto something else. I would like to get a full build for myself somewhere in there.

Posted: **Thu Sep 10, 2015 9:47 pm**

Nate:

You did a great job on this just like you did on the Dauntless you made me. Still loving the SBD-5, it turned out so great. I am very glad this project went well for you as well. You will make the people who ordered very happy I am sure.

Hope you are well.

-Corey

Small Scale Military Headquarters

1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?

Re: 1/18 FW TA-183 Huckebein?