1/18 King Tiger Re Vamp In Progress
-
- Officer - Brigadier General
- Posts: 9653
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Re: 1/18 Tiger II To Zimm or Not To Zimm ????
OK Guys,
I am almost ready to send a few kits out.
Because of the Swiss cheese I created with the sides of the hulls I am filling sanding and painting the sides of the hulls for you.
I relocated the holes about 3 times
I need a show of hands for you guys who intend to apply zimmerit to your HENSCHEL TIGER II'S.
The Porsche Tiger II's all had zimmerit on them so I will just probably do a little fill and send them ( unpainted )
So I need to see a show of hands.
This will help expedite the production so please speak up !!!!
Finally some good news.
I am almost ready to send a few kits out.
Because of the Swiss cheese I created with the sides of the hulls I am filling sanding and painting the sides of the hulls for you.
I relocated the holes about 3 times
I need a show of hands for you guys who intend to apply zimmerit to your HENSCHEL TIGER II'S.
The Porsche Tiger II's all had zimmerit on them so I will just probably do a little fill and send them ( unpainted )
So I need to see a show of hands.
This will help expedite the production so please speak up !!!!
Finally some good news.
-
- Officer - 1st Lieutenant
- Posts: 559
- Joined: Sun Nov 09, 2008 9:07 pm
- Location: Long Island, New York
Re: 1/18 Tiger II To Zimm or Not To Zimm ????
I was going to do zimmerit on mine. I like the way it looks better than the smooth sides
"When the people fear the government you have tyranny...when the
government fears the people you have liberty."
--Thomas Jefferson
government fears the people you have liberty."
--Thomas Jefferson
-
- Officer - Brigadier General
- Posts: 6028
- Joined: Mon Oct 04, 2004 6:30 pm
- Location: Atlantic Coast
Re: 1/18 Tiger II To Zimm or Not To Zimm ????
None for me, well a least not on this one.
Here are some reference picks for those thinking of putting Zimmerit on.....
Here are some reference picks for those thinking of putting Zimmerit on.....
-
- Officer - Brigadier General
- Posts: 6028
- Joined: Mon Oct 04, 2004 6:30 pm
- Location: Atlantic Coast
Re: 1/18 Tiger II To Zimm or Not To Zimm ????
This ones been colorized....
-
- Officer - 1st Lieutenant
- Posts: 559
- Joined: Sun Nov 09, 2008 9:07 pm
- Location: Long Island, New York
Re: 1/18 Tiger II To Zimm or Not To Zimm ????
Normandy, thanks for posting more great pictures
"When the people fear the government you have tyranny...when the
government fears the people you have liberty."
--Thomas Jefferson
government fears the people you have liberty."
--Thomas Jefferson
-
- Officer - Captain
- Posts: 733
- Joined: Mon Jan 10, 2011 4:27 pm
- Location: Alberta, Canada
Re: 1/18 Tiger II To Zimm or Not To Zimm ????
Looks great pickel!
On the note of zimm, what wear and tear would they show after being in the field? Would it weather the same as metal (i.e. would it rust or have worn metal areas)? I'm finishing up a 1/35 Tiger II, and I am not sure how I should detail the parts with zimm on them. [I'll post pics when I finish]
Back on topic. I am really envious of my fellow board members who are able to purchase this trophy now. Sorry if this has been addressed, but will the molds be in service for the next year, or is this the only run?
Either way, keep up the amazing work!
On the note of zimm, what wear and tear would they show after being in the field? Would it weather the same as metal (i.e. would it rust or have worn metal areas)? I'm finishing up a 1/35 Tiger II, and I am not sure how I should detail the parts with zimm on them. [I'll post pics when I finish]
Back on topic. I am really envious of my fellow board members who are able to purchase this trophy now. Sorry if this has been addressed, but will the molds be in service for the next year, or is this the only run?
Either way, keep up the amazing work!
-
- Officer - Brigadier General
- Posts: 9653
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Re: 1/18th King Tiger--- Who Wants a Jagdtiger ?
Ok Guys ,
Getting close to shipping.
The first 3 will go out this week !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Will there be anybody else who intends to apply zimmermit on their Tigers ?
-----------------------Henschel-----------------Porsche---------------Jagdtiger
Normandy---------------x- No paint-----------------------------------x no paint --First model kitted ready to pack
Norman 88--------------x 2-----------------------------------------------------------First model kitted ready to pack
Maritime 96-------------x no paint------------------------------------x no paint-----First model 85 % kitted almost ready to pack.
Tank Ace ---------------x---------------------------x-----------------------x
Grockwood--------------x--------------------------------------------------x
CW4USARMY -----------x
Canberra Paul----------x
Skypirate ---------------x---full build
Pierro of Italy-----------x
Zelda--------------------x---------------------------x-------------------------x
Robbie P----------------x
Grunt--------------------x + 1 ?--------------------------x 2 ?----------------------x 2 ?
Getting close to shipping.
The first 3 will go out this week !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Will there be anybody else who intends to apply zimmermit on their Tigers ?
-----------------------Henschel-----------------Porsche---------------Jagdtiger
Normandy---------------x- No paint-----------------------------------x no paint --First model kitted ready to pack
Norman 88--------------x 2-----------------------------------------------------------First model kitted ready to pack
Maritime 96-------------x no paint------------------------------------x no paint-----First model 85 % kitted almost ready to pack.
Tank Ace ---------------x---------------------------x-----------------------x
Grockwood--------------x--------------------------------------------------x
CW4USARMY -----------x
Canberra Paul----------x
Skypirate ---------------x---full build
Pierro of Italy-----------x
Zelda--------------------x---------------------------x-------------------------x
Robbie P----------------x
Grunt--------------------x + 1 ?--------------------------x 2 ?----------------------x 2 ?
Last edited by pickelhaube on Thu Jul 25, 2013 9:11 pm, edited 3 times in total.
-
- Officer - Brigadier General
- Posts: 9653
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Re: 1/18th King Tiger--- Who Wants a Jagdtiger ?
B-17,
As far as the zimm goes I have seen pics with 100% zimm and some with chunks fallen blasted or rubbed off.
Modelers usually depict with a base dk yellow or red primer were the zimm once was.
As far as the zimm goes I have seen pics with 100% zimm and some with chunks fallen blasted or rubbed off.
Modelers usually depict with a base dk yellow or red primer were the zimm once was.
-
- Officer - Brigadier General
- Posts: 2124
- Joined: Mon Dec 13, 2010 1:46 am
- Location: California
- Contact:
Re: 1/18 Tiger II To Zimm or Not To Zimm ????
Zimmerit was applied over red primer like Mathew said. Most worn off spots on models are usually red primmer but any type of impact from an incoming shell would shatter and blast it off down to the metal. If you are going to do this battle damage look the center of the impact should blackened and bare metal with a slight dent or groove from the impact surrounded by red primer chipped then the Zimmerit would start again. I have seen also where a shell has caused fracture cracks running out from the impact through the surrounding Zimmerit. Also if you are doing a winter camo the impact spot (bare metal) could have alittle rust if it had been there for awhile. Hope this helps.B17Fortress wrote:Looks great pickel!
On the note of zimm, what wear and tear would they show after being in the field? Would it weather the same as metal (i.e. would it rust or have worn metal areas)? I'm finishing up a 1/35 Tiger II, and I am not sure how I should detail the parts with zimm on them. [I'll post pics when I finish]
Back on topic. I am really envious of my fellow board members who are able to purchase this trophy now. Sorry if this has been addressed, but will the molds be in service for the next year, or is this the only run?
Either way, keep up the amazing work!
Last edited by Jnewboy on Sat Jul 20, 2013 11:20 am, edited 1 time in total.
-
- Officer - Brigadier General
- Posts: 6028
- Joined: Mon Oct 04, 2004 6:30 pm
- Location: Atlantic Coast
Re: 1/18 Tiger II To Zimm or Not To Zimm ????
Impact on Zimmerit....
-
- Officer - Brigadier General
- Posts: 2124
- Joined: Mon Dec 13, 2010 1:46 am
- Location: California
- Contact:
Re: 1/18 Tiger II To Zimm or Not To Zimm ????
More nice pics Normandy!!! You can see where the primer areas are and the bare metal.
Re: 1/18 Tiger II To Zimm or Not To Zimm ????
Both of my KT's will be non-zimm'd
Re: 1/18 Tiger II To Zimm or Not To Zimm ????
I will have both without the zimm.
But i will like to see one of the first you make with the zimmerit so i can be certain.
But i will like to see one of the first you make with the zimmerit so i can be certain.
-
- Officer - Brigadier General
- Posts: 9653
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Re: 1/18 Tiger II To Zimm or Not To Zimm ????
TankAce wrote:I will have both without the zimm.
But i will like to see one of the first you make with the zimmerit so i can be certain.
I WILL BE MAKING NONE WITH ZIMMERMIT.
THE QUESTION WAS MADE FOR THOSE WHO WOULD BE APPLYING ZIMMERMIT TO THEIR OWN MODEL.
Again I will NOT be applying any zimermit to these models.
So for the guys who have spoken up I will not put a primer on your models ( for those who will zimm )
The majority of the others MAY have a coat of primer on them if needed.
-
- Officer - Brigadier General
- Posts: 9653
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Re: 1/18th King Tiger--- Who Wants a Jagdtiger ?
pickelhaube wrote:Ok Guys ,
Getting close to shipping.
The first 3 will go out this week !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Will there be anybody else who intends to apply zimmermit on their Tigers ?
-----------------------Henschel-----------------Porsche---------------Jagdtiger
Normandy---------------x- No paint-----------------------------------x no paint --First Model --Shipped !!
Norman 88--------------x 2-----------------------------------------------------------First model Shipped !!
Maritime 96-------------x no paint------------------------------------x no paint-----First model Shipped !!
Tank Ace ---------------x---------------------------x-----------------------x-- First model Shipped !!
Grockwood--------------x--------------------------------------------------x---Packed ready to ship. Still in holding pattern till I get address
CW4USARMY -----------x-- On deck
Canberra Paul----------x-- On deck.
Skypirate ---------------x-- full build
Pierro of Italy-----------x
Zelda--------------------x---------------------------x-------------------------x
Robbie P----------------x
Grunt--------------------x + 1 ?--------------------------x 2 ?----------------------x 2 ?
I edited the original but wanted to bump the list .
Oh well.
Last edited by pickelhaube on Wed Jul 31, 2013 5:23 pm, edited 7 times in total.
-
- Officer - Brigadier General
- Posts: 9653
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Re: 1/18 K II Plz Let Me Know If U Intend 2 Apply Zimm 2 Ur
OK ,
I Have the first 3 packed and ready to ship !!!
They will go out tomorrow.
I will spend the whole weekend on pouring and with lots of luck the next 3 could be ready to ship early next week
I Have the first 3 packed and ready to ship !!!
They will go out tomorrow.
I will spend the whole weekend on pouring and with lots of luck the next 3 could be ready to ship early next week
-
- Officer - Brigadier General
- Posts: 2124
- Joined: Mon Dec 13, 2010 1:46 am
- Location: California
- Contact:
Re: 1/18 K II Plz Let Me Know If U Intend 2 Apply Zimm 2 Ur
This is great news!!
-
- Officer - Brigadier General
- Posts: 6028
- Joined: Mon Oct 04, 2004 6:30 pm
- Location: Atlantic Coast
Re: 1/18 K II Plz Let Me Know If U Intend 2 Apply Zimm 2 Ur
That IS great news, I don't go back for another week or so.
I may get some time to build a 1:18 King Tiger.
I may get some time to build a 1:18 King Tiger.
-
- Officer - 1st Lieutenant
- Posts: 559
- Joined: Sun Nov 09, 2008 9:07 pm
- Location: Long Island, New York
Re: 1/18 King Tiger First Kits Shipping.
Awesome, Can't wait to get started!!!
"When the people fear the government you have tyranny...when the
government fears the people you have liberty."
--Thomas Jefferson
government fears the people you have liberty."
--Thomas Jefferson
-
- Officer - Brigadier General
- Posts: 9653
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Re: 1/18 King Tiger First Kits Shipping.
normandy wrote:
Hey Normandy,
I have models of the ring camo before but have never seen a pic of the actual thing.
Thanks for finding this one .
Although it does seem impractical it is still cool looking .
-
- Officer - Brigadier General
- Posts: 9653
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Re: 1/18 King Tiger First Kits Shipping.
normandy wrote:
Hey Normandy,
I have models of the ring camo before but have never seen a pic of the actual thing.
Thanks for finding this one .
Although it does seem impractical it is still cool looking .
-
- Officer - Brigadier General
- Posts: 6028
- Joined: Mon Oct 04, 2004 6:30 pm
- Location: Atlantic Coast
Re: 1/18 King Tiger First Kits Shipping.
Pickel,
Here are a few more King Tigers with the Octopus camo....
closeup of above photo..... with less detail......
Here are a few more King Tigers with the Octopus camo....
closeup of above photo..... with less detail......
-
- Officer - Brigadier General
- Posts: 9653
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Re: 1/18 King Tiger First Kits Shipping.
Sweet pics !!!
Hey Guys,
I was making the next kits and realized that I shorted the first 3 kits.
I only sent half of the loose track links needed to do both sides.
I am running out of resin and hopefully I will have enough to make and send them.
I ordered a gallon unit of resin from my supplier and another clerk sold it to someone else.
So I ordered 2 more gallon units under strict orders not to sell them to anybody else.
Hopefully I can get the extra track links out this coming week.
Hey Guys,
I was making the next kits and realized that I shorted the first 3 kits.
I only sent half of the loose track links needed to do both sides.
I am running out of resin and hopefully I will have enough to make and send them.
I ordered a gallon unit of resin from my supplier and another clerk sold it to someone else.
So I ordered 2 more gallon units under strict orders not to sell them to anybody else.
Hopefully I can get the extra track links out this coming week.