1/18 T-34/76 All orders have been SHIPPED !!!! !!

Your Main Forum For Discussing 1:18 Scale Military Figures and Vehicles.

T-34 Vs. Sdkfz.7

1. T-34
46
72%
2. Sdkfz 7
18
28%
 
Total votes: 64

NHoggard12
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 420
Joined: Thu Jan 17, 2008 6:52 pm
Location: Greensboro, NC

Re: 1/18 T-34 Build Running Gear Prototypes Done Pics !!!

Post by NHoggard12 » Tue Oct 19, 2010 8:29 am

Hey, guys, I guess I am actually considering this piece. The t34/76 is a must have in any scale, but especially 1/18. I don't collect 1/18 scale at all (except a few aircraft), but looking over the other customs, this one is going to rock.
I am coming from the 1/32 scale, so maybe you guys can help me understand how this works-- pickelhaube will help with purchasing; looks like there is a downpayment.
But, what are the additional costs, such as paint and those large custom decals?

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 T-34 Build Running Gear Prototypes Done Pics !!!

Post by pickelhaube » Tue Oct 19, 2010 7:45 pm

NHoggard12 wrote:Hey, guys, I guess I am actually considering this piece. The t34/76 is a must have in any scale, but especially 1/18. I don't collect 1/18 scale at all (except a few aircraft), but looking over the other customs, this one is going to rock.
I am coming from the 1/32 scale, so maybe you guys can help me understand how this works-- pickelhaube will help with purchasing; looks like there is a downpayment.
But, what are the additional costs, such as paint and those large custom decals?
The good thing about the T-34 there were not too many markings.

Mostly propaganda slogans. Those can be painted by hand.

The Germans and the Allies had the stars and crosses. So hopefully decals will not be an issue.

Not sure about the Ruskie green . I imagine that Model Masters or Tamiya will have that.

Something this size will take about 3 -5 bottles then you have the super glue ( CA glue ) and the putty.

Losts of putty and sand paper. :wink:

Remember to wash and prime before you paint.

Not to much to report on the T-34 project today. I am working on the bottom hull now and hopefully I will start on the top hull Wends. :D
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

tmanthegreat
Officer - Brigadier General
Officer - Brigadier General
Posts: 11239
Joined: Tue Oct 05, 2004 7:38 pm
Location: Central California

Re: 1/18 T-34 Build Running Gear Prototypes Done Pics !!!

Post by tmanthegreat » Wed Oct 20, 2010 5:01 pm

Question about the T-34: is only one being made for the lottery or will this be a production piece with a kit available for purchase?

While the potential price does frighten me, I may be in on this if it will be available.
"If you fail to plan, you plan to fail."

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 T-34 Build Running Gear Prototypes Done Pics !!!

Post by pickelhaube » Wed Oct 20, 2010 6:48 pm

tmanthegreat wrote:Question about the T-34: is only one being made for the lottery or will this be a production piece with a kit available for purchase?

While the potential price does frighten me, I may be in on this if it will be available.
What ????

I am not sure what you are asking.

The lottery ( if it happens) will be for a kit not a full build.

As always and for years now I do accept lay-a-ways .

It order for the contest to happen I need 15 guys to anti up.

Still need 9 more to go.

This will be the only 1/18 scale T-34/76 on the planet so if you guys want to take the chance now is the time.

As stated before if you do not win the T-34 kit, the $50 will be your deposit so everybody is a winner !!!!

I almost have the lower hull done and have started on the upper hull.

No pics yet but by Friday I should have something to show :D
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

tmanthegreat
Officer - Brigadier General
Officer - Brigadier General
Posts: 11239
Joined: Tue Oct 05, 2004 7:38 pm
Location: Central California

Re: 1/18 T-34 Build Running Gear Prototypes Done Pics !!!

Post by tmanthegreat » Thu Oct 21, 2010 8:11 am

Yeah, I just saw that my question was a bit unclear - that's what one gets for trying to think complex thoughts after a long day in the office :wink:

Basically just wanted to know whether the T-34 would be available outside the lottery and you answered my question. Can't wait to see the progress pics :D
"If you fail to plan, you plan to fail."

normandy
Officer - Brigadier General
Officer - Brigadier General
Posts: 6028
Joined: Mon Oct 04, 2004 6:30 pm
Location: Atlantic Coast

Re: 1/18 T-34 Build Running Gear Prototypes Done Pics !!!

Post by normandy » Thu Oct 21, 2010 6:15 pm

RE: Ruskie green............. Model Master makes it. Russian Armor Green 4807.
I've got to head over to the hobby shop, I only have one bottle.

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 T-34 Build Running Gear Prototypes Done Pics !!!

Post by pickelhaube » Sat Oct 23, 2010 3:59 pm

So far 6 days worth of work. I think that I may just do single track links. They are coming out great with almost no flash.

So far I have the wheels mounted on the bottom hull which is almost done. I started the top hull and it almost looks like something.

Image
Image
Image

Here is Rudel checking out his handy work.

Image

Image
Image
Image
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

User avatar
aferguson
Lieutenant General - MOD
Lieutenant General - MOD
Posts: 13650
Joined: Tue Oct 05, 2004 8:08 am

Re: 1/18 T-34 Build progress Pics !!!

Post by aferguson » Sat Oct 23, 2010 4:16 pm

wow, i don't know how you do it Pick..

this one project will serve you well though. You'll be able to offer /76 /85 tanks plus su-85, 100 and 122 with not a lot of extra work. Plus a myriad of other little changes like flamethrower variants, if there's interest.
i never met an airplane i didn't like...

normandy
Officer - Brigadier General
Officer - Brigadier General
Posts: 6028
Joined: Mon Oct 04, 2004 6:30 pm
Location: Atlantic Coast

Re: 1/18 T-34 Build progress Pics !!!

Post by normandy » Sun Oct 24, 2010 5:22 am

:shock: Dang Pickel I'm impressed. I've got the glue, putty and paint ready to go........... :wink:

Birddog
Officer - Brigadier General
Officer - Brigadier General
Posts: 1919
Joined: Tue Dec 07, 2004 10:06 pm
Location: Georgia
Contact:

Re: 1/18 T-34 Build progress Pics !!!

Post by Birddog » Sun Oct 24, 2010 8:44 am

Holy crap!!! That looks so freaking awesome. Beautiful work on it all, especialy the tracks.. :D .
Go Ugly Early in 1/18!!

Still waiting and wishing for a 1/18 A-10 Warthog.

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 T-34 Build progress Pics !!!

Post by pickelhaube » Mon Oct 25, 2010 5:56 am

Thanks guys for all of the kind remarks. It meens a lot. There sure is a lot of work that goes into these things.

Sometimes it seems that it is not worth it. But with remarks like this it is what keeps me going.

My regular work is going to be heavy this week so I will not be able too spend the time on this project . I will fit in as much as I can.

Plus my list of orders is growing and I need to keep those guys happy.

I am going to try and start the turret next. I need to get off of those hulls for now. Everytime I work on them I find something that I need to do before the thing I have done already should be built.

So it is , built it. Man I need to do this first !! Cut this off now build that on . Now repeat.
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

flyboy_fx
Officer - Brigadier General
Officer - Brigadier General
Posts: 4336
Joined: Thu Nov 20, 2008 12:42 pm
Location: North Carolina,USA

Re: 1/18 T-34 Build progress !!!

Post by flyboy_fx » Mon Oct 25, 2010 10:40 am

What was the estimated price on this?

I don't like Russian stuff but this looks awesome!
"Ever tried. Ever failed. No matter. Try Again. Fail again. Fail better."
--Samuel Beckett

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 T-34 Build progress !!!

Post by pickelhaube » Mon Oct 25, 2010 5:34 pm

flyboy_fx wrote:What was the estimated price on this?

I don't like Russian stuff but this looks awesome!
There is only one other Russian tank out there in 1/18 scale.

It sells for $300 and has been around for some years now.

I think the guy made either 300 or 500 of them and they have almost all sold.

So I have a price set for mine at $300 as well.

Here is the old poll that I ran.

The T-34 won !!

viewtopic.php?f=1&t=21723&start=0&hilit=hetzer
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 T-34 Build progress !!!

Post by pickelhaube » Sat Oct 30, 2010 4:21 pm

I worked on the turret today.

MAN IS IT SMALL . WAY SMALLER THAN ANY GERMAN OR AMERICAN SHERMAN TURRET.


It is a bit rough but I may have something to post tomorrow.

I did not much time at all this week to work on it.

But I think that I may get a few days to work on it next week.
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

DropTank
Sergeant
Sergeant
Posts: 201
Joined: Fri Dec 28, 2007 5:39 am
Location: Texas

Re: 1/18 T-34 Build progress !!!

Post by DropTank » Sun Oct 31, 2010 5:39 am

Awesome work Pickel !!! You are indeed turning into a master craftsman.
Thanks for posting pictures as I enjoy watching your projects.
FLY NAVY

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 T-34 Build progress !!!

Post by pickelhaube » Sun Oct 31, 2010 4:24 pm

I worked on the turret some more today and have something to show for it. Man this is a SMALL TANK.

That turret sure must have been tight during the war. I guess that is why they moved up to the upgunned and larger 85 turret.

Image
Image

Here is a size comp next to my T-23 turreted Sherman.

Image

Here it is next to a Tiger. Even smaller looking without the fenders.

Image

Here are 1/16 scale Trumpeter T-34/85 and FOV Tiger mrtsl diacast for size. Even with the 85 turret it is still small looking. :shock:

It looks like the top of the 34's turret is almost even with the bottom of the Tiger's turret.

Image
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

plasticboy
Officer - 1st Lieutenant
Officer - 1st Lieutenant
Posts: 542
Joined: Thu Jul 01, 2010 8:21 am
Location: Taipei. Taiwan
Contact:

Re: 1/18 T-34 Build progress more pics !!!

Post by plasticboy » Mon Nov 01, 2010 9:16 am

Amazing!! The shape of T-34 almost appear, the track links and road wheels are the most difficult parts I suppose, really excited to see the tanks coming up! You are truly a craftsmanship. :shock: :shock:
Have fun with toys forever!
http://weylent.blogspot.com/

HardenSteel
Sergeant
Sergeant
Posts: 230
Joined: Mon Oct 04, 2004 6:47 pm
Location: Victoria, BC

Re: 1/18 T-34 Build progress more pics !!!

Post by HardenSteel » Wed Nov 03, 2010 11:20 pm

Phenominal! What a great modeller!

hd

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 T-34 Build progress more pics !!!

Post by pickelhaube » Thu Nov 11, 2010 4:30 pm

HardenSteel wrote:Phenominal! What a great modeller!

hd

Thanks Man !!

My regular job has been keeping me back from working on this but i got a chance to work on this the last couple of days.

I have been working on the tracks. Talk about a slow boat to China.

I made a mould of the masters. Casted about 18 track links and have moulded that. Now I am making copies of those.Man what a lot of work. :shock:

This sure is a pain. I have to put the pins in and make sure the resin takes around them.

When production starts I will have to cast about 150 links per unit :shock: :shock: :shock: :shock: :shock: :shock: :shock:

What are you guys feeling of me making the bottom strait part in one long piece and maybe the top as well and use the single links to go around the idler and drive ?

You guys who are getting this project please give me some feedback on this.

Thanks :D
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

flyboy_fx
Officer - Brigadier General
Officer - Brigadier General
Posts: 4336
Joined: Thu Nov 20, 2008 12:42 pm
Location: North Carolina,USA

Re: 1/18 T-34 Build Input Needed On Track Links !!

Post by flyboy_fx » Thu Nov 11, 2010 9:13 pm

IMO give both options just one costs more.
Because those individual likes you made are awesome!!!
"Ever tried. Ever failed. No matter. Try Again. Fail again. Fail better."
--Samuel Beckett

normandy
Officer - Brigadier General
Officer - Brigadier General
Posts: 6028
Joined: Mon Oct 04, 2004 6:30 pm
Location: Atlantic Coast

Re: 1/18 T-34 Build Input Needed On Track Links !!

Post by normandy » Sat Nov 13, 2010 6:37 am

Well Pickel, I see your plight. I for one have always liked movable tracks, its like a propeller on a 1:18 plane....I can't walk by without giving it a spin.

From the production point of view 150 links with pins per tank is very time consuming, if not maddening. The one piece rubber track would be ideal but very costly for such a limited run. :? What to do?

I guess I could live with static tracks. The T-34 is just going to be displayed.....most likely in a diorama so I won't need it roll around much. :wink:
What ever you decide it's still going to be the only 1:18th T-34 made for us.

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 T-34 Build Input Needed On Track Links !!

Post by pickelhaube » Sun Nov 14, 2010 4:41 pm

I am nost sure what I am going to do about the tracks but work continues.

Here is the rear of the hull almost done !!! :D

Image

The rear access will open via a hinge that a piece has pop off already. :evil:

Image

Image

Image
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

gary1930
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 361
Joined: Tue Oct 10, 2006 8:35 am
Location: San Antonio, TX

Re: 1/18 T-34 Build Progress pics !!

Post by gary1930 » Sun Nov 14, 2010 5:18 pm

VERY nice work.
How did you make the muffler covers?

User avatar
YT
Officer - Brigadier General
Officer - Brigadier General
Posts: 2129
Joined: Sun Mar 29, 2009 2:40 pm
Location: Central IL

Re: 1/18 T-34 Build Progress pics !!

Post by YT » Sun Nov 14, 2010 7:56 pm

What a beauty! Great work.
"There are some people who disagree with me, they are wrong." --Gen George S. Patton

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 T-34 Build Progress pics !!

Post by pickelhaube » Sun Nov 14, 2010 10:16 pm

gary1930 wrote:VERY nice work.
How did you make the muffler covers?
Thanks guys ,

Making the covers were not all that easy.

First I cut a strip of styreen the width I needed.

Then got a length of tube the correct diameter and packed both ends with Bondo.

I shaped both ends to get the correct roundness. Kind of like a half of a bullet.

Then I flatened one side and glued it onto the strip.

Then I rounded the ends to shape.

Filled in the sides with Bondo glazing putty.

Sanded to shape and do it again.

Then I cut to length.

Then added bolt heads.

The pipes are tubing cut on angles and glued and sanded to shape.

I may have to shave the ends a little better to get the correct angle.
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

Post Reply