1/18 Home Made Patrol Boat

Love to tweak toys and models? Add features and small details? This forum is for you!
Post Reply
granch
Officer - Major
Officer - Major
Posts: 853
Joined: Sat Nov 27, 2010 4:21 pm
Location: Switzerland

1/18 Home Made Patrol Boat

Post by granch » Sun May 21, 2017 3:50 pm

Hi Guys,
Here is my last creation. It started more than 20 years ago with a project of a 1/22th steamer. But the steam machine was too heavy and too high (and my technical skill with small brass pipes too low) so I gave up and resell the steam machine, but could'nt decide to throw the hull away. First trial with an other idea, again with a 40 years old Remote Control, the water line was too high and the general shape not as good as I wished:
Image.
So, I had to cut it to make the hull longer and higher. Used a lot of recycled stuff (a cement tube cap for the loudspeaker, beauty fluid bottle top for the radar, chicken cage wire mesh for the boarding ladders...), searched a long time for adequate sized life rafts (and finaly made them with balsa). So, here it is:
Image
The rear deck:
Image
The bows with its remote controlled mobile gun turret:
Image
View into the cabin (have other pics if you want to see more détails):
Image
Checking the lighting:
Image
And first water probe:
Image
Could'nt go far, I've got some problems with my old 40 MHz RC...
Image
... but hope to resolve that and be able to show later "real" missions. Also hope you enjoy it.

Rylau
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 275
Joined: Mon Oct 04, 2004 2:08 pm
Location: 1,Bergen County,Northern N.J.

Re: 1/18 Home Made Patrol Boat

Post by Rylau » Sun May 21, 2017 4:31 pm

That is really outstanding. Great job.
Sgt. John Ray 12/8/67 Hill 172
99% of Americans try to avoid getting caught in traffic.
1% of Americans try to avoid getting caught in an ambush.
God Bless Our Troops.

slogan
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 261
Joined: Wed Apr 03, 2013 7:25 pm
Location: Las Vegas, NV.

Re: 1/18 Home Made Patrol Boat

Post by slogan » Sun May 21, 2017 4:44 pm

Wonderfully done!
Never attribute to malice that which can be adequately explained by stupidity

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9638
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 Home Made Patrol Boat

Post by pickelhaube » Mon May 22, 2017 5:02 am

Looks really good.

Clever idea with the chicken wire ladders !!!
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

tmanthegreat
Officer - Brigadier General
Officer - Brigadier General
Posts: 11237
Joined: Tue Oct 05, 2004 7:38 pm
Location: Central California

Re: 1/18 Home Made Patrol Boat

Post by tmanthegreat » Mon May 22, 2017 10:57 am

That is really impressive :D

I know there is a decent patrol boat tooling made for the Chap Mei/True Heroes line that with a little work could be made into something decent...
"If you fail to plan, you plan to fail."

granch
Officer - Major
Officer - Major
Posts: 853
Joined: Sat Nov 27, 2010 4:21 pm
Location: Switzerland

Re: 1/18 Home Made Patrol Boat

Post by granch » Mon May 22, 2017 3:21 pm

ttt, which one?

tmanthegreat
Officer - Brigadier General
Officer - Brigadier General
Posts: 11237
Joined: Tue Oct 05, 2004 7:38 pm
Location: Central California

Re: 1/18 Home Made Patrol Boat

Post by tmanthegreat » Wed May 24, 2017 7:42 pm

I forget the name, but they've had several versions of the same basic tooling. One had a big "bofors" gun on the back; the current one has some type of missile-launcher/helicopter pad on it. The basic hull and cabin look pretty decent though and with some modification, the Chap Mei boat could be made to look pretty good...
"If you fail to plan, you plan to fail."

granch
Officer - Major
Officer - Major
Posts: 853
Joined: Sat Nov 27, 2010 4:21 pm
Location: Switzerland

Re: 1/18 Home Made Patrol Boat

Post by granch » Sat May 27, 2017 6:12 am

I found the Chap Mei on eBay. It looks smaller than the PTE PBR. Agree with you ttt, it could make a decent thing. But as a very small fast boat, only two 7.62 MG could be mounted on it (what, a Bofors? :lol: ), one front looking but located on the cabin roof and the second one at the aft. Not sure if it would float.
http://www.ebay.ch/itm/132178832224?_tr ... EBIDX%3AIT
Tweeking toys is a nice hobby, but I would probably prefer to go on with the last BBI Navy Seal Gunboat Boat. Buying two to make one larger and longer model, closer to the original.

granch
Officer - Major
Officer - Major
Posts: 853
Joined: Sat Nov 27, 2010 4:21 pm
Location: Switzerland

Re: 1/18 Home Made Patrol Boat

Post by granch » Sun Apr 08, 2018 8:41 am

OK, I could solve the problems of my old remote control device (it is 40 y. old...) and launch the boat in the water. I'm proud to could finish this project, my own plans, a lot of recycled material, all wood construction... the engine is from a car vacuum cleaner and the 4 1,5V batteries are a little bit too weak to run the boat properly. Some more work if I want to try it in more open waters than the little pond for the 1st trial...
Image
And here some detailled pics that got lost with photobucket:
Image
Image
Image

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9638
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 Home Made Patrol Boat

Post by pickelhaube » Tue Apr 10, 2018 4:41 am

Cool

:D
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

slogan
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 261
Joined: Wed Apr 03, 2013 7:25 pm
Location: Las Vegas, NV.

Re: 1/18 Home Made Patrol Boat

Post by slogan » Fri May 11, 2018 9:28 pm

Great job! Thanks for sharing your custom.
Never attribute to malice that which can be adequately explained by stupidity

Post Reply