Corsair replacement wheels. Available now.

Love to tweak toys and models? Add features and small details? This forum is for you!
Jay
Officer - Lt. Colonel
Officer - Lt. Colonel
Posts: 1217
Joined: Sun Jun 25, 2006 6:19 pm
Location: Auckland, New Zealand

Corsair replacement wheels. Available now.

Post by Jay » Wed Dec 19, 2012 1:09 pm

Currently working on these replacement wheels for the 21st Corsair.
They are more correct in their thickness (as accurate as the original drawings I measured off). These will screw straight into the current struts using the existing screws.
I originally did these, as my current Corsair's landing gear struts broke. So in the following weeks i'll also do a more accurate set of legs (However, these may need some work to install).
Currently these are $18.85 for the pair at Shapeways, but i'll do some final tweaking and order a set myself before making them available.
Any comments/input is welcome.

Image
Image
Last edited by Jay on Fri Mar 15, 2013 3:40 pm, edited 3 times in total.
"you get in a steep dive in this thing and you've got almost no maneuvarabilty at all. You couldn't hit the broad side of a barn with the broad side of another barn"

rudedog
Sergeant
Sergeant
Posts: 147
Joined: Thu Nov 15, 2012 9:22 am
Location: tucson az

Re: Corsair replacement wheels coming soon.

Post by rudedog » Wed Dec 19, 2012 1:39 pm

looks good i would be interrested in some

The_Helicopter_Pilot
Officer - Major
Officer - Major
Posts: 974
Joined: Sat Sep 01, 2012 3:27 am
Location: Cordell, Oklahoma
Contact:

Re: Corsair replacement wheels coming soon.

Post by The_Helicopter_Pilot » Wed Dec 19, 2012 4:09 pm

As would I!
A helicopter does not want to fly, it just vibrates so much that the ground rejects it

Ara
Sergeant
Sergeant
Posts: 130
Joined: Sat May 29, 2010 7:02 am
Location: USA

Re: Corsair replacement wheels coming soon.

Post by Ara » Thu Dec 20, 2012 9:09 am

These look great, I'm tempted to use them on the P-47 as well.
www.TheLiterateShow.com

The_Helicopter_Pilot
Officer - Major
Officer - Major
Posts: 974
Joined: Sat Sep 01, 2012 3:27 am
Location: Cordell, Oklahoma
Contact:

Re: Corsair replacement wheels coming soon.

Post by The_Helicopter_Pilot » Thu Dec 20, 2012 9:40 am

^That's a good idea too!^
A helicopter does not want to fly, it just vibrates so much that the ground rejects it

Warbird Kid
Sergeant
Sergeant
Posts: 111
Joined: Thu Aug 16, 2012 6:59 am

Re: Corsair replacement wheels coming soon.

Post by Warbird Kid » Thu Dec 20, 2012 10:17 am

Very nice
Keep Em' Flying,
Christopher Soltis

Dedicated to the preservation and education of The Sikorsky Memorial Airport

CASC FB Page: http://www.facebook.com/ctairandspace
Warbird Wear: http://warbirdwear.com/

Chicks Dig Warbirds.......right?

Folkwulfe
Officer - Captain
Officer - Captain
Posts: 719
Joined: Fri Jun 10, 2005 1:23 pm
Location: Arlington, Texas

Re: Corsair replacement wheels coming soon.

Post by Folkwulfe » Fri Dec 21, 2012 5:25 pm

I'm in for a set....
US Army MP Corps combat veteran Operation Desert Shield/Desert Storm

Fast Mover
Corporal
Corporal
Posts: 69
Joined: Fri May 28, 2010 4:23 pm

Re: Corsair replacement wheels coming soon.

Post by Fast Mover » Tue Jan 08, 2013 8:01 pm

Any plans on making a pair for the P-51? I would love to have a set to replace the skinny stock ones.

rudedog
Sergeant
Sergeant
Posts: 147
Joined: Thu Nov 15, 2012 9:22 am
Location: tucson az

Re: Corsair replacement wheels coming soon.

Post by rudedog » Wed Jan 23, 2013 2:26 pm

jay how are the tires coming i would like to buy some. thx rudedog

Jay
Officer - Lt. Colonel
Officer - Lt. Colonel
Posts: 1217
Joined: Sun Jun 25, 2006 6:19 pm
Location: Auckland, New Zealand

Re: Corsair replacement wheels coming soon.

Post by Jay » Sun Jan 27, 2013 3:50 pm

Hey Rudedog, to be honest I haven't done anything since my last post.
The wheel kits are ready to go, but the hold up is my current finances ( :roll: ). I've only just returned to work after 5 weeks holiday which has also been reflected in my bank account. I also just checked and the cost of shipping to NZ is more than the cost of the actual wheel kit!
So I'm afraid it will be another few weeks before i'm able to get a set shipped down here.

Rudedog (and anyone else) I can make them available to you now BUT, it will be under the provision that they are untested and at your own risk!
They should be scale accurate, but the main concerns would be the overall fitment. Some parts may require some minor modelling work to fit (but if anything parts may be to tight). Also, I'm not sure about the wall thicknesses. I made them as thin as possible to have the least amount of material, but still sturdy enough (in my opinion) to be rigid and strong. How this works out, I'm not sure.

As for wheels for the Mustangs, yes it certainly is a possibility. I'm not sure how the Bbi ones are fixed, but the 21st ones have a pin "axle". Hopefully these are easy to pry out. The good thing about the 21st Corsair wheels is that they are screwed on.
The other thing is time, and seeing as though the corsair wheels have had the gestation period of an elephant, I can't tell you when I would do a Mustang set.
"you get in a steep dive in this thing and you've got almost no maneuvarabilty at all. You couldn't hit the broad side of a barn with the broad side of another barn"

rudedog
Sergeant
Sergeant
Posts: 147
Joined: Thu Nov 15, 2012 9:22 am
Location: tucson az

Re: Corsair replacement wheels coming soon.

Post by rudedog » Tue Jan 29, 2013 2:42 pm

no hurry here i can wait till you test fit and are sure how they work.

Jay
Officer - Lt. Colonel
Officer - Lt. Colonel
Posts: 1217
Joined: Sun Jun 25, 2006 6:19 pm
Location: Auckland, New Zealand

Re: Corsair replacement wheels coming soon.

Post by Jay » Mon Feb 18, 2013 12:09 pm

Hey Rudedog. I've just ordered a set and they should arrive in NZ by the 28th of this month.
"you get in a steep dive in this thing and you've got almost no maneuvarabilty at all. You couldn't hit the broad side of a barn with the broad side of another barn"

rudedog
Sergeant
Sergeant
Posts: 147
Joined: Thu Nov 15, 2012 9:22 am
Location: tucson az

Re: Corsair replacement wheels coming soon.

Post by rudedog » Tue Feb 19, 2013 12:48 pm

cool let me know how they turn out i have 10 corsairs .

Jay
Officer - Lt. Colonel
Officer - Lt. Colonel
Posts: 1217
Joined: Sun Jun 25, 2006 6:19 pm
Location: Auckland, New Zealand

Re: Corsair replacement wheels coming soon.

Post by Jay » Thu Feb 28, 2013 11:54 am

Currently Friday morning here in NZ.
The Kit should be at home when I get back from work.
I'll post some pics this weekend.
"you get in a steep dive in this thing and you've got almost no maneuvarabilty at all. You couldn't hit the broad side of a barn with the broad side of another barn"

Jay
Officer - Lt. Colonel
Officer - Lt. Colonel
Posts: 1217
Joined: Sun Jun 25, 2006 6:19 pm
Location: Auckland, New Zealand

Re: Corsair replacement wheels coming soon.

Post by Jay » Sun Mar 03, 2013 12:11 pm

Image
Image
Image

Here is the first test set.
Seeing as this is my first print out, there was a couple of points that came up (Grunt probably has come across these already with his incredible prints).
Firstly there was two areas where the fit was two tight. The hole where the stock landing gear legs slots into, and the center cap that covers the screw head.
I thought I had these set when I did the CAD work, but obviously i made the tolerance too tight so will will correct the CAD model.
Lastly, when I first received the parts i was a little disappointed with the lack of detail compared to the CAD model. However, after playing around i noticed that there was just excess powder still in the crevices. I quick once over with a small stiff brush (I used one of those brushes you use to scrub your fingernails, an old toothbrush would also do the trick) and all the excess powder came out revealing the detail!
Next stage is getting these painted.......
"you get in a steep dive in this thing and you've got almost no maneuvarabilty at all. You couldn't hit the broad side of a barn with the broad side of another barn"

rudedog
Sergeant
Sergeant
Posts: 147
Joined: Thu Nov 15, 2012 9:22 am
Location: tucson az

Re: Corsair replacement wheels. Printed parts have arrived.

Post by rudedog » Wed Mar 06, 2013 7:19 am

looks way better then the stock wheels please let me know when you are ready to sell some thx rudedog

Jay
Officer - Lt. Colonel
Officer - Lt. Colonel
Posts: 1217
Joined: Sun Jun 25, 2006 6:19 pm
Location: Auckland, New Zealand

Re: Corsair replacement wheels. Printed parts have arrived.

Post by Jay » Wed Mar 06, 2013 12:05 pm

Thanks RD. I shot a few coats of primer on last night. Will be doing some Nato Black and Alluminium painting tonight.
In the process, I reamed out the holes for the strut and screw plug. Now I have a better idea of the hole size tolerences.
Will post final pics this weekend, so looks like these will roll out early next week.
Stay tuned.
"you get in a steep dive in this thing and you've got almost no maneuvarabilty at all. You couldn't hit the broad side of a barn with the broad side of another barn"

rudedog
Sergeant
Sergeant
Posts: 147
Joined: Thu Nov 15, 2012 9:22 am
Location: tucson az

Re: Corsair replacement wheels. Printed parts have arrived.

Post by rudedog » Thu Mar 07, 2013 8:17 am

i,m there

Black Lion VF-213
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 403
Joined: Sun Jan 21, 2007 7:06 pm
Location: Charleston, SC

Re: Corsair replacement wheels. Printed parts have arrived.

Post by Black Lion VF-213 » Thu Mar 07, 2013 10:56 am

PM Sent

Jay
Officer - Lt. Colonel
Officer - Lt. Colonel
Posts: 1217
Joined: Sun Jun 25, 2006 6:19 pm
Location: Auckland, New Zealand

Re: Corsair replacement wheels. Printed parts have arrived.

Post by Jay » Thu Mar 07, 2013 12:59 pm

PM Returned to VF-213.
"you get in a steep dive in this thing and you've got almost no maneuvarabilty at all. You couldn't hit the broad side of a barn with the broad side of another barn"

Jay
Officer - Lt. Colonel
Officer - Lt. Colonel
Posts: 1217
Joined: Sun Jun 25, 2006 6:19 pm
Location: Auckland, New Zealand

Re: Corsair replacement wheels. Printed parts have arrived.

Post by Jay » Mon Mar 11, 2013 7:25 pm

Painted up and ready to roll.
One thing these pictures don't show are the center caps.....which brings up an issue.
For the guys thinking of getting these. Do you want a cap that fits snug (and will probably need pliers to pull back out) or do you want a loose fit (which would probably require a drop of glue to keep secured).
Also, I would recommend going for the "polished" plastic finish at Shapeways. The "layering" of the material is noticeable in the spoke area (the test set being the default and cheaper plastic)....just a suggestion.


Image
Image
Image
Image
"you get in a steep dive in this thing and you've got almost no maneuvarabilty at all. You couldn't hit the broad side of a barn with the broad side of another barn"

rudedog
Sergeant
Sergeant
Posts: 147
Joined: Thu Nov 15, 2012 9:22 am
Location: tucson az

Re: Corsair replacement wheels. Feedback wanted on caps.

Post by rudedog » Tue Mar 12, 2013 7:07 am

tight fittting for me the pictures look realy good would like to buy some whem your ready to sell lmk. rudedog

Jay
Officer - Lt. Colonel
Officer - Lt. Colonel
Posts: 1217
Joined: Sun Jun 25, 2006 6:19 pm
Location: Auckland, New Zealand

Re: Corsair replacement wheels. Feedback wanted on caps.

Post by Jay » Wed Mar 13, 2013 4:30 pm

Store is now live.

http://www.shapeways.com/shops/No8

Prices are "wholesale" at the moment but will put a markup on them at a later date.
"you get in a steep dive in this thing and you've got almost no maneuvarabilty at all. You couldn't hit the broad side of a barn with the broad side of another barn"

Black Lion VF-213
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 403
Joined: Sun Jan 21, 2007 7:06 pm
Location: Charleston, SC

Re: Corsair replacement wheels. Feedback wanted on caps.

Post by Black Lion VF-213 » Thu Mar 14, 2013 7:30 am

On Shapeways, is the $5.21 price for one tire or the pair? Has anyone else made a purchase yet? Just wanting to make sure I complete all hurdles when I'm buying my sets.

Thanks

Jay
Officer - Lt. Colonel
Officer - Lt. Colonel
Posts: 1217
Joined: Sun Jun 25, 2006 6:19 pm
Location: Auckland, New Zealand

Re: Corsair replacement wheels. Feedback wanted on caps.

Post by Jay » Thu Mar 14, 2013 4:48 pm

Hey Bryce. I've just updated the kit so all the parts, needed to convert one Corsair, are on one sprue.
If you grab a set, you'll be the first :) .
"you get in a steep dive in this thing and you've got almost no maneuvarabilty at all. You couldn't hit the broad side of a barn with the broad side of another barn"

Post Reply