Page 6 of 8
Re: Salvage Yard
Posted: Wed Jun 05, 2013 2:09 pm
by Jnewboy
Looking for a 1/18 Panther engine cover door
Re: Salvage Yard
Posted: Thu Jun 06, 2013 3:17 am
by TheWolf
I am looking for the F-14 horizontal stabilizer! both of mine brokeon the pin.
Re: Salvage Yard
Posted: Thu Jun 06, 2013 4:42 am
by pickelhaube
Axis Nightmare wrote:I need a 1/18 U.S. Halftrack front bumper assembly....either style, any color. Please PM if you have one for sale.
Thanks!
Dennis
Hey Dennis,
I never check this post.
I have a winch bumper for the American track.
21st Century.
Re: Salvage Yard
Posted: Fri Jun 07, 2013 6:38 pm
by maritime96
Looking for 7-8 of the wheels from the 1/18 Ultimate soldier Dodge WC51 truck. Please PM me if you have any available. - Thanks
Re: Salvage Yard
Posted: Thu Jun 13, 2013 11:28 am
by rudedog
sorry for the long delay the avenger parts i have are both half s of the plane no plugs both wings left has broken landing gear center floor pan complete cowling and rear tail parts loose 2 torpedos and 6 rockets . pm for prices
Re: Salvage Yard
Posted: Thu Jun 13, 2013 2:23 pm
by Axis Nightmare
pickelhaube wrote:Axis Nightmare wrote:I need a 1/18 U.S. Halftrack front bumper assembly....either style, any color. Please PM if you have one for sale.
Thanks!
Dennis
Hey Dennis,
I never check this post.
I have a winch bumper for the American track.
21st Century.
I don't either
Thanks a bunch but I got one a while back. Forgot the post was on here
Thanks again!
Re: Salvage Yard
Posted: Thu Jun 13, 2013 3:03 pm
by big_mike
I could use the starboard/right wing assembly for an avenger. When I bought mine the wing hinge broke in shipping.
oh btw pm sent
Re: Salvage Yard
Posted: Thu Jun 20, 2013 7:55 am
by supersonicfifi
Hello i miss the front scoop of the 21st century toy latest mustang see picture :
can anyone help me ? thank you
it's for my prototype :
http://www.warbird-photos.com/gpxd/view ... =1&t=28721
Re: Salvage Yard
Posted: Thu Jun 20, 2013 8:27 am
by Razor17019
Hi all!
Looking for a left wing to a Hellcat.
PM or email me if you have one available.
Razor
Re: Salvage Yard
Posted: Sat Jul 20, 2013 9:45 pm
by cjg476
Looking for a 1/32 p-40 canopy if anyone has one.
Re: Salvage Yard
Posted: Tue Aug 06, 2013 9:11 am
by rschaap
I need a tail rotor for a 1/18 Huey helicopter. Can anyone help. Will pay or trade for piece.
Re: Salvage Yard
Posted: Tue Aug 06, 2013 9:36 am
by Razor17019
rschaap wrote:I need a tail rotor for a 1/18 Huey helicopter. Can anyone help. Will pay or trade for piece.
Pickelhaube made me a tail rotor for my 1/18 huey.
You might want see if he can make and sell you one.
Razor
Re: Salvage Yard
Posted: Tue Aug 06, 2013 11:50 am
by rschaap
Razor17019 wrote:rschaap wrote:I need a tail rotor for a 1/18 Huey helicopter. Can anyone help. Will pay or trade for piece.
Pickelhaube made me a tail rotor for my 1/18 huey.
You might want see if he can make and sell you one.
Razor
I actually bought one from Matt, a while back. He believed it was the last one he had. I sent him a PM this morning to see if he has one more hanging around, but I am not holding my breathe. Thanks for the input, I appreciate the fact that the members try and help each other in anyway they can.
Re: Salvage Yard
Posted: Tue Nov 12, 2013 7:40 am
by Fast Mover
Hi,
I am looking for the following from a 1/18 Me-109.
Antennas (both fuselage and tail, with string preferably)
Tire (main wheel)
Tailwheel assembly
Thanks - FM
Re: Salvage Yard
Posted: Sun Dec 29, 2013 7:49 pm
by pizzaguy
I'm looking for a drop tank (two is available) and the side supports for the Ultimate soldier P-47 any color. Also, two drop tanks for P-51. Thanks
Re: Salvage Yard
Posted: Mon Jan 27, 2014 1:22 pm
by BELTxFED
Hello, I need:
One ball .30 cal MG off the FoV M26 Pershing tank. This ball MG fits into a round slot on the front glacis, between the circled white star and the right headlight. In otherwords, the non-driver's front /forward facing MG position.
I could also use some boxes, sleeping bags, tank traps and dragons teeth.
I will pay $12.00 total for the MG and some extra add on pieces. I also want to buy other FoV and Cold Steel 1/32 vehicles and extras. Pay thru Paypal gift only.
Please PM me. Thanks for the help.
Re: Salvage Yard
Posted: Sun Jun 22, 2014 10:03 pm
by slogan
Hello,
I'm looking for the fuel tank that hangs from the sponson wing of a BBI Blackhawk. I'm missing one from my USAF version though either Blackhawk is acceptable.
I'm also looking for an extra plank from the BBI Little Bird to hang rockets/ guns. Thanks!
Re: Salvage Yard
Posted: Thu Jun 26, 2014 5:15 am
by granch
Slogan,
If you don't find the hanging device for the rocket launcher, you can saw the connector above the tubes, drill holes at the same distance and hang the pod on the other one (intended for the twin TOW launchers).
I should have 1 extra tank (OD green) for your Blackhawk, but leaving in Switzerland, shipping costs might be high.
Re: Salvage Yard
Posted: Sat Jun 28, 2014 3:08 pm
by slogan
Thanks for the suggestion on the plank. I'll PM you on the fuel tank.
Re: Salvage Yard
Posted: Sun Oct 05, 2014 7:21 am
by Dauntless
Anybody got a spare tail wheel for a 1:18 P-40?
Had my Flying Tiger hanging up for years, didn't notice it was missing one till now.
It probably fell out from getting bumped or something, got vacuumed up....gone.
Re: Salvage Yard
Posted: Tue Dec 02, 2014 8:15 pm
by Studly
Good Morning Gentleman and others
I was wondering , dose anyone have a spare Spitfire Canopy . I bought one off Evilbay and it turned up with the Canopy spit in two , was not a happy camper...So do any of you Chaps out there have one for sale.
Studly
Re: Salvage Yard
Posted: Tue Dec 23, 2014 5:04 pm
by brillcs
I have the retracted landing gear and rear landing gear cover for a 1:48 Carousel P-40 Tomahawk if anyone needs them. I keep all my planes gear down so I typically will have extra pieces.
Re: Salvage Yard
Posted: Sat Jan 24, 2015 9:23 pm
by pizzaguy
Looking for a tail hook and landing gear spring for JSI F14. PM if you have an extra laying around.
Thanks in advance, Nathan
Re: Salvage Yard
Posted: Sat Apr 18, 2015 1:20 pm
by Jnewboy
Looking for the tail fins to a BBI 1/18 Zero and landing gear if possibe.
Re: Salvage Yard
Posted: Sat Jun 06, 2015 4:02 pm
by Jay
Hey guys. I'm looking for a XD P-38 canopy. Ideally from a "Putt Putt Maru". After the main part and the top hatch (I don't need the hatch that slides down into the cockpit).
Also a set of XD Stuka wheels/spats and rear stabs from a first series Stuka (flying Pig Crest).