Page 6 of 8

Re: Current 1/32 kit builds

Posted: Tue Sep 09, 2014 8:04 pm
by The_Helicopter_Pilot
That I can understand, my town actually has a business here for things such as this, and 3d printing, and all that, so I guess if someone else that don't have the right printer, or a local business to make these prints, I can see how it could be a bit difficult...

Re: Current 1/32 kit builds

Posted: Fri Sep 12, 2014 11:08 pm
by [CAT]CplSlade
Not too much done in the last week, but did manage to get tools and small bits painted. Also worked some rusty exhaust magic. I get most of Saturday to finish up the tanks themselves then I will get all the tracks this week. Then I apply weathering over everything and that will be four more in the bag.

That will leave me with 27 to complete right now, and another 49 unbuilt in my stash.

Image

Image

Image

Image

Re: Current 1/32 kit builds

Posted: Sat Sep 13, 2014 4:33 am
by cnq
very nice. At this rate you could open a hobby shop in no time :D

Re: Current 1/32 kit builds

Posted: Wed Sep 24, 2014 6:47 am
by [CAT]CplSlade
Halfway through the weathering process:

Image

Image

Image

Image

Re: Current 1/32 kit builds

Posted: Thu Sep 25, 2014 2:36 am
by The_Helicopter_Pilot
If you want to add to your British aircraft, here's a 1/32 Lancaster kit
Ebay# 171473731236

Re: Current 1/32 kit builds

Posted: Thu Sep 25, 2014 9:07 pm
by [CAT]CplSlade
No balsa kits for me, thanks. I'll just wait for the plastic kit from HK Models that is coming in a few months.

Re: Current 1/32 kit builds

Posted: Sat Oct 04, 2014 9:22 pm
by [CAT]CplSlade
Stick a fork in them, they are for all intents and purposes done!

Image
Image

Image
Image

Image
Image

Image
Image

Re: Current 1/32 kit builds

Posted: Mon Oct 06, 2014 9:04 pm
by plasticgeneral
If anyone is to ever release another TIGER I in 1:32,
it had better be an EARLY TIGER I like this one!

Plastic General

Re: Current 1/32 kit builds

Posted: Thu Dec 25, 2014 8:54 pm
by [CAT]CplSlade
Decided to clear my head before tackling more armor, and dove into another old Revell kit. This time I chose the Hawker Hurricane MK IIc kit that was reissued in 1998 (new decals, same 1970's mold). Another outdated kit with raised panels lines and virtually no cockpit and plenty of fit issues. To top it all off, I misplaced the decals and had no backup British markings. As the kit was based off the older MK I kit it had many incorrect parts, most obvious of which are the wing panels, as they are very different between the two types. I had no desire to tackle a complete sanding and rescribing when all I had to do was pick up the better PCM kit or hope for someone to release a new tooling.

So I decided to do a plane with simple markings that would be quick and easy to achieve given that my heart was rapidly going out of this fight: One of the Turkish Mk IIc's the British supplied Turkey with as part of a reconnaissance squadron in 1942.

The plane is completely hand painted with the exception of the initial primer coat; everything else was by brushed-on acrylics and enamels and applied dry pigments.

It shows. I don't care, as hanging up over my head mixed in with all the rest, it looks enough the part to pass. I'm just glad it's done and I can go back to my panzers.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Re: Current 1/32 kit builds

Posted: Fri Dec 26, 2014 9:18 am
by cnq
The Turkish Mk II looks good. As long as you're happy that's all that matter :D
I build for fun not for displaying in museum.

Re: Current 1/32 kit builds

Posted: Fri Dec 26, 2014 2:09 pm
by ketelone
Wow, I really like the Turkish Hurricane.

Re: Current 1/32 kit builds

Posted: Sat Jan 31, 2015 8:52 pm
by [CAT]CplSlade
I have just applied an overall dark wash and will be finishing up with chipping/rust/dust effects tomorrow, but these are basically done and I'm off to the next in line!

Image

234/1
Image

234/2 Puma
Image

234/3
Image

I have the 234/4 but it is a Dragon kit and these were all Italeri, so the the assembly line process I was using would not have applied. The Dragon kit has made me realize I will need to replace these some day, though.

I believe my next to complete will be the Jagdpanzer 38(t), Marder III, Jagdpanzer IV L/48, and Wirbelwind. With any luck, I have enough paint on hand to lay down the initial Dunkelgelb on all four by Sunday night. Family is out of town until Monday!

Re: Current 1/32 kit builds

Posted: Sun Feb 01, 2015 8:18 am
by Dauntless
Nice work on the armor and Hurricane. I especially like the grey Panzer and Tiger. 8)

On the Hurricane you are using modeling clay to separate the colors prior to painting the next. It's been a while since I built any model, but this is a novel thing and solves a lot of tedious masking it would seem.

Questions,
Does this work when you spray also, you apply a masking paper cut with x-acto knife over the first color stuck to the modeling clay and spray the next?
Also, do you use solvent or water based color on it?
I could be wrong, but the oily nature of modeling clay it would seem that it would make an enamel based paint react or separate?

Re: Current 1/32 kit builds

Posted: Sun Feb 01, 2015 1:18 pm
by [CAT]CplSlade
It's actually that rubbery blue stuff you use to hold up Post-it notes - more like stiff Silly Putty than clay and doesn't have the oil. Got the idea off an armor forum but it really works on planes since there are fewer small bits to work around.

Re: Current 1/32 kit builds

Posted: Sun Feb 01, 2015 2:46 pm
by Dauntless
That's good to know, thanks.

Would work on not only camouflage patterns but the uneven pattern between the grey undersides and OD topsides of particularly WWII transport aircraft that has the series of soft peaks and valleys the length of the aircraft.
Also a softer edge between colors if sprayed on.

Re: Current 1/32 kit builds

Posted: Sun Feb 01, 2015 5:02 pm
by [CAT]CplSlade
I use the stuff to form irregular edges as straight stuff like Luftwaffe splinter is easy to manage. Depending on how thick you make the roll it determines how hard/soft the edge is. You won't get a super hard edge, though, unless you press down pretty hard - which might be dangerous! You can then use bigger tape scrap to cover the big areas.

I find this much easier than trying to cut irregular shapes from paper. Always keep something nearby to rest it on as it will slowly try to sink into paper. I keep a block on back of a Magic the Gathering card as that has a glosscote on the surface.

Re: Current 1/32 kit builds

Posted: Sun Feb 01, 2015 8:54 pm
by [CAT]CplSlade
Okay, last photo shoot. I am calling them done.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Simple kits with not much detail inside beyond seats and steering wheels, but they go together with little trouble.

Re: Current 1/32 kit builds

Posted: Wed Feb 04, 2015 11:08 am
by Fitzy
Just want to say all the models look great. Thanks for sharing!

Re: Current 1/32 kit builds

Posted: Wed Feb 18, 2015 6:39 pm
by [CAT]CplSlade
Sneak preview of my next batch. As is the case for most of us, it is bitterly cold and so my workshop is too cold to paint in right now so I am waiting to lay camo and then finish up with the weathering.

Still contemplating my next 1/32 aircraft build. All excited about all my big bombers but I think I might be turning Japanese for this next build.

After these five I will have just 18 unfinished vehicles out of the initial 37 I started January last year.

Image

Image

Image

Also got to get those dudes painted so I can seal up the turret on the Flak gun.

Re: Current 1/32 kit builds

Posted: Sun Mar 01, 2015 4:25 pm
by [CAT]CplSlade
All done except for some small touch-ups here and there and maybe a bit more weathering depending on how I feel.

Jagdpanzer 38(t) fur 7.5cm PaK39 Early Production
Image

SdKfz 161/4 Flakpanzer IV Wirbelwind
Image

SdKfz 162 Jagdpanzer IV L/48
Image

SdKfz 139 Panzerjäger 38(t) für 7.62cm PaK36(r) Marder III
Image

SdKfz 123 Pzkpfw II Ausf L Luchs
Image

Re: Current 1/32 kit builds

Posted: Sat Mar 14, 2015 10:24 pm
by [CAT]CplSlade
What am I working on in this next batch?

Image

Image

Image

Image

I have been doing them in batches of five, but recent events prompted me to add one of the vehicles to this set, and in reality I am doing seven vehicles ATM as I am doing a repaint of a 1/32 AFV for someone, so I figured I may as well do the 1/35 version at the same time. Only twelve more to go and then I can start some new projects.

Re: Current 1/32 kit builds

Posted: Sun Mar 15, 2015 5:30 am
by ketelone
You are amazing.

Re: Current 1/32 kit builds

Posted: Tue Mar 17, 2015 6:56 pm
by [CAT]CplSlade
Camo done, heading for the finish line. Also, those with long memories may recognize the 1/32 Sdkfz 231 I did a while back that was covered in green spots. Well, she's been sold and is being repainted and should look much better than before. Hopefully.

Sdkfz 232
Image

Ostwind
Image

Möbelwagen
Image

1/32 Sdkfz 231 (the repainting of which inspired me to finish my 232 ahead of schedule)
Image

The Panzer II Flammpanzer and the Bison await the building of the tracks before I can lay primer.

Re: Current 1/32 kit builds

Posted: Thu Mar 19, 2015 4:46 am
by Fitzy
You do amazing work!!! Thanks for showing all your projects. Looking forward to your future builds. Keep them coming :!:

Re: Current 1/32 kit builds

Posted: Thu Apr 09, 2015 12:15 pm
by [CAT]CplSlade
Just added four more future pieces to my collection:

This also counts as the auf Pzkpfw 1a und 1b since the only difference is when they were converted, really
Image

Counts as two pieces even though its one kit - because it actually is two kits in one box
Image

I AM THE GOD OF HELLFIRE, AND I BRING YOU....!!!!!
Image

I have six versions of the 251 now.

This puts 86 pieces of German hardware in my collection at this point, with 23 on or almost on the shelf and another 12 by end of summer if not earlier. I'll then have more tanks and trucks than I did when I was still collecting diecast 1/32.

Still have 23 planes mixed between 21C/FOV/BBI. They actually hold up better against their kit counterparts than the armor does so I don't feel as compelled to replace them. Plus, I like my three non-German 109F's that I did.