1/18 M16A2s and and M240 Golf

flpickupman · Post by **flpickupman** » Tue Oct 24, 2006 11:45 am

Is anyone aware if BBi or another manufacturer produces these rifles? I'm tired of my modern Marines carrying Army rifles(M4s).

steelbonnet · Post by **steelbonnet** » Tue Oct 24, 2006 11:53 am

Powerteam have done M16A2s though as you know they are hit n miss on how rigid they are.
As for M16/203s I`d say check the Hasbro Joe line up (ARAH).

Alternatively you could custom make your own using various brands to get the Accurate size.

Ja
Steel Bonnet

flpickupman · Post by **flpickupman** » Tue Oct 24, 2006 12:00 pm

Hmm.. custom rifle building. Honestly, I'd be more than happy with just the A2s. M203s would be a bonus. Although I would need at least one M203 for my future LAR Scout team. Dang. I hate customizing little stuff. A Tiger tank, I can work with. Small arms (literally) would give me fits. So PTE has released an M16A2?

Also, has BBi released a carded armor crewman? I need one or two more guys to run my LAV.

shadow83 · Post by **shadow83** » Tue Oct 24, 2006 12:03 pm

Marauder has a very close to accurate M16w/203 for .75 a piece.Im hoping that Marauder makes the new M16a4 in his next series.

parrish333 · Post by **parrish333** » Tue Oct 24, 2006 12:06 pm

As mentioned, there are some M16s in various PowerTeam sets, though I don't recall seeing a M16-203.

However, Maraunder Inc. makes these:

http://www.marauderinc.com/servlet/Detail?no=68

The GIJoe line has had some pretty sharp looking M16s as well. For example:

http://www.yojoe.com/access/d89/119.shtml and especially:
http://www.yojoe.com/action/05/sgtstalker7.shtml (see accessories for this fig)

Marauder is the way to go if you're looking for low-cost and easy to obtain. With the joe weapons, you obviously usually have to get the fig too. But there is a tremendous variety of realistic (or usually semi-realistic) weapons to be had through all the figures. Peruse this database to see some of the goodies throughout the years:

http://www.yojoe.com/action/whobit/

tmanthegreat · Post by **tmanthegreat** » Tue Oct 24, 2006 12:08 pm

flpickupman wrote:Also, has BBi released a carded armor crewman? I need one or two more guys to run my LAV.

No, they haven't. I think it is a very necessary figure, however! Not only do you need an extra driver for the LAV, but also the BBI M1 Tank and the 21c Bradley and M-113. You can potenitally customize your own figure using the helmet from the 21c Viet Nam tanker figures that are (or were) avaliable for surplus on the 21c site and the body of a modern figure w/o all the pouches. Its not entirely accurate, but doesn't look all that bad

flpickupman · Post by **flpickupman** » Tue Oct 24, 2006 1:11 pm

Cool, thanks for all the links Parrish

Tman, if nothing else, I have enough surplus guys that I can have everyone wearing the same helmet. From the shoulders up is pretty much all that will be seen anyway.

Spudkopf · Post by **Spudkopf** » Tue Oct 24, 2006 3:16 pm

G'day flpickupman

I have the Marauder Inc M16/203 and it is a very fine and crisp piece indeed, the weapon is very rigid being I suspect a solid resin casting, the only negative is the lack of a trigger guard, however this can be easily be added from a PTE, 21stCT, etc M16.

With the 21stCT forest m1025 HMMWV if memory serves me correctly you get three average looking m16s in one of the baggies, these are ideal custom fodder for upgrading the Marauder Inc M16/203 for full on 1/18th use.

blaster_e11 · Post by **blaster_e11** » Wed Oct 25, 2006 11:46 am

even without trigger guard marauderinc weapons are topnotch

plus it helps positionning the weapon in fig hands

flpickupman · Post by **flpickupman** » Wed Oct 25, 2006 11:55 am

I was thinking that too. The Sig pistols that came with the Blackhawk crew have super delicate trigger guards. It took me all of 2 minutes to break one.

I have yet to see a rifle with A2 style handguards. Is anyone aware of such a thing being available?

shadow83 · Post by **shadow83** » Wed Oct 25, 2006 1:25 pm

The pte m16 has the a2 handguards.It is dead on in size comparison but the hndgrip tends to be a little big.Also it is not very rigid and tends to bend when figures have it in both hands.

flpickupman · Post by **flpickupman** » Thu Oct 26, 2006 4:44 am

Excellent. I'll keep an eye out. Thanks.

tderespino · Post by **tderespino** » Thu Oct 26, 2006 8:54 am

They might be hard to find but Intoyz put out some 1/18th navy seals a few years ago. they came with a short m16 and a nice M16/203

good luck

tderespino · Post by **tderespino** » Thu Oct 26, 2006 8:57 am

here are some pics

http://actionfigures.about.com/library/ ... 42001a.htm

t

flpickupman · Post by **flpickupman** » Thu Oct 26, 2006 9:08 am

Very nice. It's a shame they used the wrong handguards. I wouldn't turn it down if I was able to acquire one though.

Okay, after poking around my LAV, I'm expanding my weapons search. The pintle mount machinegun for the Vehicle Commander looks like it came right our of a PTE package. It has a pistol grip for pete's sake! I'm hoping that BBi has included the M240G with one of their figures that I can convert to a pintle mount M240 with the correct twin grips. Anyone know if this is the case?

I managed to locate a pretty good photo of the setup.

shadow83 · Post by **shadow83** » Thu Oct 26, 2006 10:49 am

BBI put out a 240 with one of the latest weapons packs and one with a desert ops figure last year,USAF special forces b 21286.It is spot on in accuracy but has stock and handgrip but it should be easy to convert.

flpickupman · Post by **flpickupman** » Thu Oct 26, 2006 11:10 am

Sweet. Are the weapons packs available online yet?

shadow83 · Post by **shadow83** » Thu Oct 26, 2006 11:55 am

No,i had to contact bbi directly and they sent them to me for 5.00 each and shipping.Im not sure which set it is,i just remember it has the M8 weapon assortment also.

flpickupman · Post by **flpickupman** » Thu Oct 26, 2006 1:40 pm

Okey doke. Thanks.

grunt1 · Post by **grunt1** » Thu Oct 26, 2006 7:13 pm

Shadow, how did you specify what you wanted in a way that they could tell which weapons pack? Was there a sku # or something?

shadow83 · Post by **shadow83** » Thu Oct 26, 2006 7:31 pm

For the weapons i sent the sku# and for the figures i sent a picture of the cia operative from the august toy show and they sent me those.When i got the new figure i saw that the card and the numbers for the other so i sent those and sent them right out.Here are the numbers for the 5 new figures.With luck they have more.

USMC MACHINE GUNNER 21570
26TH MEU(SOC) 21566
USMC FORCE RECON 21568
US 10TH MOUNTAIN DIVISION 21569
CIA PARAMILITARY 21567

Small Scale Military Headquarters

1/18 M16A2s and and M240 Golf

1/18 M16A2s and and M240 Golf

intoyz

here