Brummbar conversion kit
Brummbar conversion kit
Wanted to give a heads up to anyone interested. The Brummbar kit will be ready this week, if all goes well. So will be soon and can take orders on any who want one. The kit will be like the Stug kit with some subtle changes that should make it even easier to attach to your existing Panzer IV. I am learning as I go, and trying to make the kits better each time in detail, and ease of assemble.
Thanks again all who ordered a Stug Kit, and hope they turn out well for your collection.
Thanks again all who ordered a Stug Kit, and hope they turn out well for your collection.
Wir ritten unsere Panzer zum Ruhm, es war der Todesschwan oder die Panzer. Schlacht von Kursk.
-
- Officer - Brigadier General
- Posts: 6028
- Joined: Mon Oct 04, 2004 6:30 pm
- Location: Atlantic Coast
Re: Brummbar conversion kit
Sounds great, which model Brummbar are you making? The one with the MG34 or without?
-
- Officer - Brigadier General
- Posts: 3544
- Joined: Tue Sep 18, 2007 6:59 pm
- Location: Villa Rica, GA
Re: Brummbar conversion kit
So you're asking early or mid/late?
-
- Officer - 1st Lieutenant
- Posts: 559
- Joined: Sun Nov 09, 2008 9:07 pm
- Location: Long Island, New York
Re: Brummbar conversion kit
Yeah I would be into a Brummbar
"When the people fear the government you have tyranny...when the
government fears the people you have liberty."
--Thomas Jefferson
government fears the people you have liberty."
--Thomas Jefferson
-
- Officer - Brigadier General
- Posts: 6028
- Joined: Mon Oct 04, 2004 6:30 pm
- Location: Atlantic Coast
Re: Brummbar conversion kit
[CAT]CplSlade wrote:So you're asking early or mid/late?
Yes your correct.
late version
http://www.rctanksaustralia.com/images/ ... bar_02.jpg
Last edited by normandy on Sat Sep 17, 2016 5:50 am, edited 1 time in total.
Re: Brummbar conversion kit
I think I can actually make it where you have the choice of early, or late version with the MG 34 gun.
Wir ritten unsere Panzer zum Ruhm, es war der Todesschwan oder die Panzer. Schlacht von Kursk.
-
- Officer - Brigadier General
- Posts: 3544
- Joined: Tue Sep 18, 2007 6:59 pm
- Location: Villa Rica, GA
Re: Brummbar conversion kit
The mg versions also used the Stug III G cupola for the commander and the superstructure was reduced in height. Don't know if the height dropped enough to warrant changing anything so maybe nothing to really worry about. Also, after the first 60 were made they up-armored the driver's compartment and removed his hatch to put in a ventilator fan.
So, unless someone needs one of those first 60, all you really need to differentiate the two main types is to have one with a cupola and bow mg, and one without.
So, unless someone needs one of those first 60, all you really need to differentiate the two main types is to have one with a cupola and bow mg, and one without.
Re: Brummbar conversion kit
Should be able to put some pics up later today. It is about done just finishing up the hatches.
Wir ritten unsere Panzer zum Ruhm, es war der Todesschwan oder die Panzer. Schlacht von Kursk.
Re: Brummbar conversion kit
I generally do not like showing things before they are all the way done but I will this time just to wet some people's appetites.
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]
[url][/url]
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]
[url][/url]
Wir ritten unsere Panzer zum Ruhm, es war der Todesschwan oder die Panzer. Schlacht von Kursk.
-
- Officer - 2nd Lieutenant
- Posts: 261
- Joined: Sat Dec 03, 2011 5:32 pm
Re: Brummbar conversion kit
It looks great, excellent work well done.
-
- Officer - 1st Lieutenant
- Posts: 559
- Joined: Sun Nov 09, 2008 9:07 pm
- Location: Long Island, New York
Re: Brummbar conversion kit
That is awesome. My appetite is definitely wet
"When the people fear the government you have tyranny...when the
government fears the people you have liberty."
--Thomas Jefferson
government fears the people you have liberty."
--Thomas Jefferson
-
- Officer - Brigadier General
- Posts: 6028
- Joined: Mon Oct 04, 2004 6:30 pm
- Location: Atlantic Coast
Re: Brummbar conversion kit
That looks fantastic!
Re: Brummbar conversion kit
Thanks fellas I appreciate the compliments. I am trying this time to add even more detail, and make it as authentic as possible. I am also making sure it is universal to fit both forms of tank hulls.
Wir ritten unsere Panzer zum Ruhm, es war der Todesschwan oder die Panzer. Schlacht von Kursk.
Re: Brummbar conversion kit
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]Update:
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]
Brummbar molds are being made as we speak. In a couple days I will have enough poured to start taking orders from anyone who wants one.
Will post some pics soon of a complete kit.
Update:
Took way more mold material then I was expecting, so gonna be a little delay as I wait for more molding compound to arrive. Sorry folks
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]
Brummbar molds are being made as we speak. In a couple days I will have enough poured to start taking orders from anyone who wants one.
Will post some pics soon of a complete kit.
Update:
Took way more mold material then I was expecting, so gonna be a little delay as I wait for more molding compound to arrive. Sorry folks
Last edited by Aracula on Tue Sep 20, 2016 4:21 am, edited 1 time in total.
Wir ritten unsere Panzer zum Ruhm, es war der Todesschwan oder die Panzer. Schlacht von Kursk.
-
- Officer - 2nd Lieutenant
- Posts: 261
- Joined: Sat Dec 03, 2011 5:32 pm
Re: Brummbar conversion kit
Hi Sanford
Would you be interested in doing a 1 18 Sturmtiger kit after you have finished the Brummbar kit?
Would you be interested in doing a 1 18 Sturmtiger kit after you have finished the Brummbar kit?
Re: Brummbar conversion kit
Would need the lower half of a Tiger tank, but I am sure I could.
Wir ritten unsere Panzer zum Ruhm, es war der Todesschwan oder die Panzer. Schlacht von Kursk.
Re: Brummbar conversion kit
Update
Here is the almost finished Brummbar, it has a few small pieces that are not on it yet. The main gun is also just taped in atm it will be glued later on a finished kit. All three hatches open, yes this is the early version not the late, but I am looking into a way you can convert it over easy if possible.
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]
Here is the almost finished Brummbar, it has a few small pieces that are not on it yet. The main gun is also just taped in atm it will be glued later on a finished kit. All three hatches open, yes this is the early version not the late, but I am looking into a way you can convert it over easy if possible.
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]
Wir ritten unsere Panzer zum Ruhm, es war der Todesschwan oder die Panzer. Schlacht von Kursk.
-
- Officer - Brigadier General
- Posts: 6028
- Joined: Mon Oct 04, 2004 6:30 pm
- Location: Atlantic Coast
Re: Brummbar conversion kit
I like the look of your Brummbar Aracula. Its really coming along nicely!
Let us know when to order.
Let us know when to order.
Re: Brummbar conversion kit
Should be just a few more days and I will be ready to start shipping out to those that want one.
Also all I am looking for any parts off about any 21st century or BBi, or any other WWII vehicles, or planes, in 1/18th. If you have some laying around, and might want to sell, please pm me and let me know, thanks.
Also all I am looking for any parts off about any 21st century or BBi, or any other WWII vehicles, or planes, in 1/18th. If you have some laying around, and might want to sell, please pm me and let me know, thanks.
Wir ritten unsere Panzer zum Ruhm, es war der Todesschwan oder die Panzer. Schlacht von Kursk.
Re: Brummbar conversion kit
Update:
Last mold is set, will be d-molding tonight, will start pouring main center piece tomorrow, and will be ready to start taking any orders on the kit. The kit will run 90.00 plus shipping. I am taking a little less for it as is a few less parts. It did take me over two gallons of molding material, and a lot of man hours to build. This kit I tried to add more detail to then the Stug, and also it required it as the top had a lot more detail to build to make it look right.
Anyways by Monday I will have 4 or 5 poured.
Last mold is set, will be d-molding tonight, will start pouring main center piece tomorrow, and will be ready to start taking any orders on the kit. The kit will run 90.00 plus shipping. I am taking a little less for it as is a few less parts. It did take me over two gallons of molding material, and a lot of man hours to build. This kit I tried to add more detail to then the Stug, and also it required it as the top had a lot more detail to build to make it look right.
Anyways by Monday I will have 4 or 5 poured.
Wir ritten unsere Panzer zum Ruhm, es war der Todesschwan oder die Panzer. Schlacht von Kursk.
Re: Brummbar conversion kit
I am pouring the kits, if you are interested in one just PM me and let me know how many you are after.
The parts are coming out pretty good and should only need a little clean up work before I ship you one so should not be to long of a wait period, but again depends on quantity of kits that get ordered as this could get me a little behind.
Anyhow let me know folks, and we will get you a Brummbar to add to your collections.
Thanks
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]
The parts are coming out pretty good and should only need a little clean up work before I ship you one so should not be to long of a wait period, but again depends on quantity of kits that get ordered as this could get me a little behind.
Anyhow let me know folks, and we will get you a Brummbar to add to your collections.
Thanks
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]
[URL=http://s1313.photobucket.com/user/ ... .jpg[/img][/url]
Wir ritten unsere Panzer zum Ruhm, es war der Todesschwan oder die Panzer. Schlacht von Kursk.
-
- Officer - Brigadier General
- Posts: 6028
- Joined: Mon Oct 04, 2004 6:30 pm
- Location: Atlantic Coast
Re: Brummbar conversion kit
PM on it's way....
Re: Brummbar conversion kit
Hey all, if anyone is interested in a Brummbar kit or even a Stug kit but needs a donor tank so they are not getting one because of that. I wanted to let you know that I have one of the Chinese knock off Panzer 4s in the box still, I can sell at cost of what I paid for it if you need one.
If so PM me and we can work it out, I only have one to sell though, so first come, first serve.
Thanks All
If so PM me and we can work it out, I only have one to sell though, so first come, first serve.
Thanks All
Wir ritten unsere Panzer zum Ruhm, es war der Todesschwan oder die Panzer. Schlacht von Kursk.