Page 5 of 6

Re: 1/18th Jagdpanther Rebooted Production Has Started !!!

Posted: Fri Jun 12, 2015 6:13 am
by pickelhaube
OK, I think that I have all of the hulls poured and about 1/2 of the parts to the kits .

Here is a tally of kits that have been ordered if your name is not on the list please contact me.

Maritime 96..........................x1 ......... M-3 .... sorry about that.
Crazy Kraut.......................... x 2..........plus K-2
Shomare..............................x1...........plus many many other kits
Falcutta ............................... x 1...........plus T-23 turret
Cannabera Paul......................x 2
Zelda....................................x2
Normandy............................. x 1
Grockwood.............................x 1
Blitzhaze................................x 2

Is that it , did I miss anybody ?

Now I was thinking of making the rear part of the Panther/ Jagdpanther for an additional $20 and if you guys want I will connect the 2 parts for an additional $20.

Still that will be cheaper than the Hun's offering quite a few years back . He sold his for around $ 200 and he did not offer a better replacement tow cable set with his kit.

I really would not like to offer the pioneer tools ( @ an additional cost ) because accounting for and making the molds for all of that gear will be taxing. :? :? :?

Re: 1/18th Jagdpanther Production Started . Rear Deck Neede

Posted: Fri Jun 12, 2015 9:39 am
by maritime96
You missed me <<sniff>> :cry: LOL PM sent - I would be into you attaching the back part for $20

Re: 1/18th Jagdpanther Production Started . Rear Deck Neede

Posted: Fri Jun 12, 2015 1:14 pm
by pickelhaube
maritime96 wrote:You missed me <<sniff>> :cry: LOL PM sent - I would be into you attaching the back part for $20

Yikes you were one of the fist and I forgot . :roll: :roll: :roll:

Re: 1/18th Jagdpanther Production Started . Rear Deck Neede

Posted: Fri Jun 12, 2015 1:35 pm
by maritime96
It's all good my friend :D

Re: 1/18th Jagdpanther Production Started . Rear Deck Neede

Posted: Fri Jun 12, 2015 4:53 pm
by pickelhaube
Here is a twist for you guys .

It looks like I will be offering the rear deck for about $20 .

I am going to cut off the high cooler fan and offer the rear deck as a stock high fan ( later ) or a short fan ( earlier ).

I will cast the large piece with a hole in it and make the fan piece interchangeable.

For $20.

I will mount the rear on the main hull for an additional $20 for those who want me to.

Re: 1/18th Jagdpanther Production Started . Rear Deck Neede

Posted: Sat Jun 13, 2015 3:55 am
by normandy
Pickelhaube, I think offering a rear deck is great idea. Now we have the opportunity to make early versions of both
the Panther G and Jagdpanther.
Maybe you could offer a parts kit for the Panther G...

Image

Re: 1/18th Jagdpanther Production Started . Rear Deck Neede

Posted: Sat Jun 13, 2015 3:04 pm
by Crazy Kraut
Count me in for the rear deck 2times. Is a T34 tank without turret available?

Re: 1/18th Jagdpanther Production Started . Rear Deck Neede

Posted: Sat Jun 13, 2015 6:24 pm
by pickelhaube
Crazy Kraut wrote:Count me in for the rear deck 2times. Is a T34 tank without turret available?
Sounds good CK !!

No but I do need to make 2 x T-34s for another customer and I can make another one while I am at it.

Re: 1/18th Jagdpanther Production Started . Rear Deck Neede

Posted: Sun Jun 14, 2015 3:26 pm
by CanberraPaul
Matthew could you please do all the mods on my two Jagdpanthers. Also I would like the 2 different fans if you do them.

Originally I was having you send one kit to me and one kit to Jon - but now please just send both kits to Jon.

Re: 1/18th Jagdpanther Production Started . Rear Deck Neede

Posted: Sun Jun 14, 2015 8:06 pm
by pickelhaube
CanberraPaul wrote:Matthew could you please do all the mods on my two Jagdpanthers. Also I would like the 2 different fans if you do them.

Originally I was having you send one kit to me and one kit to Jon - but now please just send both kits to Jon.
OK will do.

Re: 1/18th Jagdpanther Rebooted Production Has Started !!!

Posted: Mon Jun 15, 2015 5:43 am
by pickelhaube
Rear deck add ons ??????

Who wants the rear deck and do you want the early or late version ?

$20 for the deck.
$ 20 and I will attach it for you.

...........................Kits.........Deck Y/ N.......Early Y / N........Late Y / N...Attached Y / N

Maritime..............x1 ..............Y............................Y.......................................Y
Crazy Krt............ x 2...............Y x 2...................................... x 2 .....................Y
Shomare.............x1.............?
Falcutta ............ x 1...........N
Cannabera...........x 2...........Y x 2................Y.........................Y...........................Y
Zelda....................x2.............N
Normandy............ x 1............N
Grockwood............x 1...............Y....................Y.................................................N
Blitzhaze................x 2...........Y x 2................Y......................Y...........................Y
..
PM me with your wants. :wink: :D :D :D

I will hopefully have the rear deck done this weekend for you guys to see it before I make the molds.

Re: 1/18 Jagdpanther In Production . Who Wants The Rear Dec

Posted: Mon Jun 15, 2015 12:57 pm
by normandy
Pickel, I'm good with just the kit, no rear engine deck.

Re: 1/18 Jagdpanther In Production . Who Wants The Rear Dec

Posted: Mon Jun 15, 2015 3:27 pm
by CanberraPaul
Matthew please attach mine.

Re: 1/18 Jagdpanther In Production . Who Wants The Rear Dec

Posted: Mon Jun 15, 2015 4:47 pm
by Falcatta
Hi

Just the 2 kits please. :)

Re: 1/18 Jagdpanther In Production . Who Wants The Rear Dec

Posted: Mon Jun 15, 2015 7:38 pm
by maritime96
I will take the rear deck, early version and attached. - PM sent - :D

Re: 1/18th Jagdpanther Production Started . Rear Deck Neede

Posted: Mon Jun 15, 2015 10:04 pm
by maritime96
BTW Normandy great looking Panther. Like the changed fan :D
normandy wrote:Pickelhaube, I think offering a rear deck is great idea. Now we have the opportunity to make early versions of both
the Panther G and Jagdpanther.
Maybe you could offer a parts kit for the Panther G...

Image

Re: 1/18 Jagdpanther In Production . Who Wants The Rear Dec

Posted: Tue Jun 16, 2015 12:13 pm
by Crazy Kraut
If possible please attach mine

Re: 1/18 Jagdpanther In Production . Who Wants The Rear Dec

Posted: Tue Jun 16, 2015 5:00 pm
by pickelhaube
Crazy Kraut wrote:If possible please attach mine
What decks do you want Sven ?

Re: 1/18 Jagdpanther In Production . Who Wants The Rear Dec

Posted: Mon Jun 22, 2015 3:22 pm
by pickelhaube
Here is the back piece with the radiator options . I will go ahead and make the rear hatch as well. Missing in the pics.

Hopefully the molds will be made today . If I get both halves of the molds made today I have a full day of pouring tomorrow and hopefully some of these kits will get shipped this week.

Image

Image

Image

Image

Re: 1/18 Jagdpanther In Production . Rear Deck Proto Done P

Posted: Tue Jun 23, 2015 12:22 am
by blitzhazed
THAT LOOKS .GREAT WORK AS ALWAYS MATTHEW

Re: 1/18 Jagdpanther In Production . Rear Deck Proto Done P

Posted: Tue Jun 23, 2015 2:15 am
by normandy
Great job Matthew! Its nice to have that option.

Re: 1/18 Jagdpanther In Production . Rear Deck Proto Done P

Posted: Thu Jun 25, 2015 5:02 pm
by pickelhaube
I think that I have almost all the parts casted now it is time to kit them up and attach the rear sections.

You guys who have not done so already please anti up the average shipping will be about $15 in your situation if I over charge you on shipping I will reimberce if the shipping is under I will e-mail you .

Out of country guys your shipping will be more of course.

Image

Image

Image
Image

Re: 1/18 Jagdpanther Production wrapping up

Posted: Thu Jun 25, 2015 5:25 pm
by normandy
....at the Pickelwerks.......

Image

Image

Image

Re: 1/18 Jagdpanther Production wrapping up

Posted: Thu Jun 25, 2015 5:30 pm
by normandy
Matthew, I know I still owe shipping, I'll send it out. :D

Re: 1/18 Jagdpanther Production wrapping up

Posted: Mon Jun 29, 2015 5:49 am
by pickelhaube
normandy wrote:Matthew, I know I still owe shipping, I'll send it out. :D
Thanks John .

Alrighty guys. I have attached all of the rear pieces to those who want it. I have one more series of putty and painting and they will be done .

I am halfway through the touch up process of the pieces parts and this project will be a wrap.

I am guessing that ALL domestic shipping will be about $15.

You guys who have ordered the back pieces and have had them attached please submit your remittence .

Cannaberra P. we are good just send the $15 and I will ship to Jon.

I will thin out my PMs so you guys can send me your shipping addresses. Sometimes your address do not show up on paypal so please PM me with them.

Thanks .