Can some one post F-14 detailed pic's of boarding ladder

VMF115 · Post by **VMF115** » Fri Apr 09, 2010 5:13 am

Can some one post F-14 detailed pic's of the JSI F-14 boarding ladder...Please and how far does it come down?

pcoughran · Post by **pcoughran** » Fri Apr 09, 2010 9:54 am

Unfortunately there really isn't a "ladder" on the stock F14 - only the ladder door. And, it doesn't even open all the way like it should - see mine below:

If you goto the Custom/Mods threads you can see some great photos of DEVGRU's ladder he added below:

See the custom thread here about half way down:
viewtopic.php?t=19463&start=0
You have to have quite a bit of talent to pull that off though.

VMF115 · Post by **VMF115** » Fri Apr 09, 2010 10:03 am

Thank you pcoughran, I wounder what kind of mod you would have to do to get the door to fully open?

NWarty · Post by **NWarty** » Fri Apr 09, 2010 10:07 am

Well the geniuses at JSI's factory glued mine completely shut. No amount of xacto scoring and scribing could get it open. Plus, I'm not sure why they would only model half the ladder in the first place

pcoughran · Post by **pcoughran** » Fri Apr 09, 2010 10:55 am

VMF115 wrote:Thank you pcoughran, I wounder what kind of mod you would have to do to get the door to fully open?

If you go to the link I posted in the prior reply, the first picture DEVGRU posts I believe shows that he had to cut the panel directly below the ladder door. There is a small panel there that is just molded so you can see the panel lines for it. You would have to cut that then somehow customize it to be able to "hinge" back onto the main body so it could open and close to allow the ladder door to open fully. Not sure how he did it - maybe glued a piece of tiny rod styrene onto the small cut panel door inside and then put a couple hollow rod receptacles on the inside of the body to "receive" the glued rod on the inside of the small panel?
The way it comes stock the ladder door sticks almost 90 degrees straight out from the side of the plane so that makes no sense at all.

VMF115 · Post by **VMF115** » Fri Apr 09, 2010 2:46 pm

I was hopeing it could be done with out having to cut it I have seen the ladder down with out the panel open.

deankleines · Post by **deankleines** » Fri Apr 09, 2010 3:13 pm

Patrick,

Here you go! I took at least 20 pics of the boarding ladder and was able to operate it, so I have a good understanding of how it should be constructed in 18th scale.

VMF115 · Post by **VMF115** » Fri Apr 09, 2010 7:20 pm

Thanks for the pictures.

grunt1 · Post by **grunt1** » Fri Apr 09, 2010 8:32 pm

Over the PA system "Sir, please step away from the aircraft....."

Kidding of course. Dean, thank you for taking such detailed shots of the real thing in action..

VMF115 · Post by **VMF115** » Fri Apr 09, 2010 9:49 pm

grunt1 wrote:Over the PA system "Sir, please step away from the aircraft....."

Kidding of course. Dean, thank you for taking such detailed shots of the real thing in action..

LOL...Yes Dean Thank you for taking the shots!

vince_chua · Post by **vince_chua** » Mon Feb 07, 2011 11:11 am

NWarty wrote:Well the geniuses at JSI's factory glued mine completely shut. No amount of xacto scoring and scribing could get it open. Plus, I'm not sure why they would only model half the ladder in the first place

Mine too! Does anybody know how to get them open?

Small Scale Military Headquarters

Can some one post F-14 detailed pic's of boarding ladder

Can some one post F-14 detailed pic's of boarding ladder

Re: