1/18 Pavehawk Tail Fin , Crab Eye Orders Almost Filled !!

Your Main Forum For Discussing 1:18 Scale Military Figures and Vehicles.
pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

1/18 Pavehawk Tail Fin , Crab Eye Orders Almost Filled !!

Post by pickelhaube » Thu Jun 09, 2011 8:23 pm

Hey Guys,

I have been commissioned to do the Pavehawk nose sensor things.I know some of you guys have wanted them in the past so now I am going to make them along with his order.

He ordered a full kit ready to paint.

Let me know

Image
Image
Last edited by pickelhaube on Sun Sep 23, 2012 4:59 pm, edited 5 times in total.
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

pcoughran
Officer - 1st Lieutenant
Officer - 1st Lieutenant
Posts: 596
Joined: Mon Jun 30, 2008 10:58 am
Location: 1, USA, MO, St. Louis

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by pcoughran » Fri Jun 10, 2011 6:11 pm

Pickel,
Are you talking about the smaller sensors that are angled off 45 degrees - not the larger FLIR and Radome? You already made the FLIR/Radomes a long time ago in both the Army and Airforce versions right?
I only want sensors if I can eventually make a DAP version. I know you're sick of me bringing it up.
Need a M230 Chain Gun, Rocket pod, and new Winglets.
any chance more would want these?
If I could get those new items, I'd also order another set of M134 Gatlins, another Fuel Probe, another set of window inserts, and another FLIR/Radome set (Army version this time) so it would be a substantial package.
Thanks,
Phil
"Where's dat waskily wabbit?"
____________________________________________
Good Trades: Ostketten, Pickelhaube, Cornbreadfred, Sledgehammer, Pizzaguy, caesarbc3,jwcarpenter

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by pickelhaube » Fri Jun 10, 2011 8:52 pm

pcoughran wrote:Pickel,
Are you talking about the smaller sensors that are angled off 45 degrees - not the larger FLIR and Radome? You already made the FLIR/Radomes a long time ago in both the Army and Airforce versions right?
I only want sensors if I can eventually make a DAP version. I know you're sick of me bringing it up.
Need a M230 Chain Gun, Rocket pod, and new Winglets.
any chance more would want these?
If I could get those new items, I'd also order another set of M134 Gatlins, another Fuel Probe, another set of window inserts, and another FLIR/Radome set (Army version this time) so it would be a substantial package.
Thanks,
Phil

Yep the crab eye looking things.

Do you have any pics of the winglets and other parts you speak of .
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

pcoughran
Officer - 1st Lieutenant
Officer - 1st Lieutenant
Posts: 596
Joined: Mon Jun 30, 2008 10:58 am
Location: 1, USA, MO, St. Louis

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by pcoughran » Sat Jun 11, 2011 4:34 am

It actually has two versions of the winglets - one with larger winglets that have two weapons pods attachments and a smaller one with only a single attachment (I like the single version and the pictures below are of that). The single version is the one they actually use - I think the double version was a test/prototype version and was found to be too heavy, not manueverable enough.
Image
Image
Image
Image
Image
"Where's dat waskily wabbit?"
____________________________________________
Good Trades: Ostketten, Pickelhaube, Cornbreadfred, Sledgehammer, Pizzaguy, caesarbc3,jwcarpenter

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by pickelhaube » Sat Jun 11, 2011 6:54 am

It looks like the original winglets could be modified. What do you think?

Is the side weapon made already by another manufacturer ?
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

User avatar
supersonicfifi
Officer - Colonel
Officer - Colonel
Posts: 1269
Joined: Wed Jun 01, 2005 2:47 pm
Location: FRANCE

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by supersonicfifi » Sat Jun 11, 2011 9:04 am

more than a new sensor : a new version

INCREDIBLE :

Image

http://www.google.fr/imgres?imgurl=http ... 8QOrmbGOBw
1/18 mirage 2000 & RAFALE should i say more ?

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by pickelhaube » Sat Jun 11, 2011 9:51 am

supersonicfifi wrote:more than a new sensor : a new version

INCREDIBLE :

Image

http://www.google.fr/imgres?imgurl=http ... 8QOrmbGOBw

This would be awesome to do. But everything is just speculation. Other than the sheared off tail that the world has seen.

If you guys wants. I know I do and will settle for an artists rendition . I am there.

Or we can just wait for the 1/44 AKA dinky Chinese versions to come out.
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

pcoughran
Officer - 1st Lieutenant
Officer - 1st Lieutenant
Posts: 596
Joined: Mon Jun 30, 2008 10:58 am
Location: 1, USA, MO, St. Louis

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by pcoughran » Sat Jun 11, 2011 11:12 am

pickelhaube wrote:It looks like the original winglets could be modified. What do you think?

Is the side weapon made already by another manufacturer ?
the M230 Chain Gun is used on the Apache as well although it has a different mount. If you have a 1/18 Apache maybe a modified one could be made from that?
The rocket pods may be the same ones on the Kiowa Warriors and the Apache as well?
"Where's dat waskily wabbit?"
____________________________________________
Good Trades: Ostketten, Pickelhaube, Cornbreadfred, Sledgehammer, Pizzaguy, caesarbc3,jwcarpenter

Beeavision
Officer - 2nd Lieutenant
Officer - 2nd Lieutenant
Posts: 420
Joined: Fri Oct 02, 2009 12:52 am
Location: Orlando, FL

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by Beeavision » Sat Jun 11, 2011 12:06 pm


User avatar
supersonicfifi
Officer - Colonel
Officer - Colonel
Posts: 1269
Joined: Wed Jun 01, 2005 2:47 pm
Location: FRANCE

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by supersonicfifi » Sat Jun 11, 2011 1:28 pm

Those chinese brands are incredible ! allready a TOY !!!!!!!!

Boy ! what a chopper ( i always liked the comanche scout ... too bad it was abandoned...)

This BLACK HAWK could be an incredible display ( just like its 1/144 counterpart)

Phil
1/18 mirage 2000 & RAFALE should i say more ?

8416w
Corporal
Corporal
Posts: 60
Joined: Thu Jul 12, 2007 4:44 pm
Location: North Carolina

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by 8416w » Sat Jun 11, 2011 4:14 pm

Matthew, I will take a pair of the sensor thingies!

rohirrimknight
Sergeant
Sergeant
Posts: 124
Joined: Wed Dec 01, 2010 8:18 am

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by rohirrimknight » Sun Jun 12, 2011 12:21 am

Hi, I have 1/18 BBI Blackhawk and interesting for the full kit ready paint (large FLIR, RADOME and the two sensors) on the first picture complete with full paint (understand that this is the US ARMY version) right? Would you please let me know the price, Paypal payment. Thanks.

granch
Officer - Major
Officer - Major
Posts: 853
Joined: Sat Nov 27, 2010 4:21 pm
Location: Switzerland

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by granch » Sun Jun 12, 2011 1:56 am

Hi all,
It's a very cool idea to make these crab eyes (IR detector for ground to air, IR-missiles?) at the front. But I would like PH to also make the seme eyes that are mounted at the tail, as an added piece that extends the vertical fin: it would be a nonsense to have only the front eyes. Im' in for such an add-on.

Image

Image

Image

For a DAP version, here's a triple canon:
Image

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by pickelhaube » Sun Jun 12, 2011 7:02 am

This post is starting to turn into my last Paveyhawk post. It stated with the fuel boom and ended up with the minis,FLIR,radomes , small winglets,
window frames, ammo cans and what ever else.

I am really NOT savvy on any of the mods you guys talk of . What is DAP ?

Granch, doing the tail boom sensors should be a simple mod. Can you get any more pics.

Is there a model made with all of these add ons ?

I got the( 1/48- 1/35 ? ) Pavehawk model off of ebay when I did that project. Do they have one with the rocket pods and all of the other stuff ?
I have done this in the past . If somebody buys and sends me the model I will take the price off of his order.

Can you guys give me a list of the wants with pics ?

The crab eye sensors will be done. I will make those as I make my customers order. ( He has already paid for them as a "one of" )

If there is more interest in the rest of these mods let me know.

The pavehawk project grew into my best seller. Over 150 kits made :shock: :D

But , I will make the nose sensors only at this time. Once I get all of my back orders done
I REALLY , REALLY NEED TO GET BACK ON THE HORTEN PROJECT.

After that and the Humvee project I will do this project.

IF THERE IS MORE OF A DEMAND :wink:

R-Knight pm me with your wants :D
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

rohirrimknight
Sergeant
Sergeant
Posts: 124
Joined: Wed Dec 01, 2010 8:18 am

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by rohirrimknight » Sun Jun 12, 2011 7:47 am

PM sent.

granch
Officer - Major
Officer - Major
Posts: 853
Joined: Sat Nov 27, 2010 4:21 pm
Location: Switzerland

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by granch » Sun Jun 12, 2011 8:45 am

Hello PH,
It is endless to complete the BBI Pavehawk... I'm going to make the cabin tanks. Here are from the rear eyes some more pictures , the2 first from Vladimir Yakubov seen on SVSM.org and the others from visualintel.net:

Image

Image

Image

Image

granch
Officer - Major
Officer - Major
Posts: 853
Joined: Sat Nov 27, 2010 4:21 pm
Location: Switzerland

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by granch » Mon Jun 13, 2011 2:49 am

About DAP, Wikipedia says:
MH-60L Direct Action Penetrator (DAP): US Army variant. Special operations modification of the baseline MH-60L, operated by the 160th Special Operations Aviation Regiment. The DAP is equipped with ESSS or ETS stub wings, each capable of carrying a M230 Chain Gun 30 mm automatic cannon, rocket pods, and various other armaments. M134D miniguns are used as door guns. 37 MH-60Ls were built and some 10 had received a in-flight refueling probe by 2003.
Followed by the more sophisticated MH-60K.
DAP seems also to be a contraction of IDAP, Integrated Defensive Action Penetrator.

pcoughran
Officer - 1st Lieutenant
Officer - 1st Lieutenant
Posts: 596
Joined: Mon Jun 30, 2008 10:58 am
Location: 1, USA, MO, St. Louis

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by pcoughran » Mon Jun 13, 2011 8:38 pm

pickelhaube wrote:Is there a model made with all of these add ons ?

I got the( 1/48- 1/35 ? ) Pavehawk model off of ebay when I did that project. Do they have one with the rocket pods and all of the other stuff ?
I have done this in the past . If somebody buys and sends me the model I will take the price off of his order.

Can you guys give me a list of the wants with pics ?

The crab eye sensors will be done. I will make those as I make my customers order. ( He has already paid for them as a "one of" )

If there is more interest in the rest of these mods let me know.

The pavehawk project grew into my best seller. Over 150 kits made :shock: :D

But , I will make the nose sensors only at this time. Once I get all of my back orders done
I REALLY , REALLY NEED TO GET BACK ON THE HORTEN PROJECT.

After that and the Humvee project I will do this project.

IF THERE IS MORE OF A DEMAND :wink:

R-Knight pm me with your wants :D

Pickel,
In my previous post, the 4th and 5th pictures down are the Academy 1/35 DAP. I'll check out my Hobby Lobby in the next couple weeks or as soon as the next 40% off coupon comes up and if they have one I'll pick it up and send it to you, then maybe we could get the ball rolling on some of this stuff even if it way in the back of the line so to speak.
Phil
"Where's dat waskily wabbit?"
____________________________________________
Good Trades: Ostketten, Pickelhaube, Cornbreadfred, Sledgehammer, Pizzaguy, caesarbc3,jwcarpenter

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by pickelhaube » Mon Jun 13, 2011 8:50 pm

pcoughran wrote:
pickelhaube wrote:Is there a model made with all of these add ons ?

I got the( 1/48- 1/35 ? ) Pavehawk model off of ebay when I did that project. Do they have one with the rocket pods and all of the other stuff ?
I have done this in the past . If somebody buys and sends me the model I will take the price off of his order.

Can you guys give me a list of the wants with pics ?

The crab eye sensors will be done. I will make those as I make my customers order. ( He has already paid for them as a "one of" )

If there is more interest in the rest of these mods let me know.

The pavehawk project grew into my best seller. Over 150 kits made :shock: :D

But , I will make the nose sensors only at this time. Once I get all of my back orders done
I REALLY , REALLY NEED TO GET BACK ON THE HORTEN PROJECT.

After that and the Humvee project I will do this project.

IF THERE IS MORE OF A DEMAND :wink:

R-Knight pm me with your wants :D

Pickel,
In my previous post, the 4th and 5th pictures down are the Academy 1/35 DAP. I'll check out my Hobby Lobby in the next couple weeks or as soon as the next 40% off coupon comes up and if they have one I'll pick it up and send it to you, then maybe we could get the ball rolling on some of this stuff even if it way in the back of the line so to speak.
Phil

Hey Phil,

Sweet. That is a step in the right direction. :D
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

pcoughran
Officer - 1st Lieutenant
Officer - 1st Lieutenant
Posts: 596
Joined: Mon Jun 30, 2008 10:58 am
Location: 1, USA, MO, St. Louis

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by pcoughran » Mon Jun 20, 2011 12:07 pm

Hey Phil,

Sweet. That is a step in the right direction. :D[/quote]

Pickel,
I just checked the Hobby Lobby coupon for this week and we're in luck - it's the 40% off any item. Now just have to hope my local one has the DAP 1/35 model in stock. I hope to make it there in the next couple days.
Phil
"Where's dat waskily wabbit?"
____________________________________________
Good Trades: Ostketten, Pickelhaube, Cornbreadfred, Sledgehammer, Pizzaguy, caesarbc3,jwcarpenter

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by pickelhaube » Mon Jun 20, 2011 3:43 pm

pcoughran wrote:Hey Phil,

Sweet. That is a step in the right direction. :D
Pickel,
I just checked the Hobby Lobby coupon for this week and we're in luck - it's the 40% off any item. Now just have to hope my local one has the DAP 1/35 model in stock. I hope to make it there in the next couple days.
Phil[/quote]


Hey Phil,

Fantastic !!!!
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

pcoughran
Officer - 1st Lieutenant
Officer - 1st Lieutenant
Posts: 596
Joined: Mon Jun 30, 2008 10:58 am
Location: 1, USA, MO, St. Louis

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by pcoughran » Wed Jun 22, 2011 6:00 pm

I picked up a 1/35 DAP kit to send to Pickel. It should be on its way UPS on Friday.
Phil
"Where's dat waskily wabbit?"
____________________________________________
Good Trades: Ostketten, Pickelhaube, Cornbreadfred, Sledgehammer, Pizzaguy, caesarbc3,jwcarpenter

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 Scale Pavehawk nose sensor thingies

Post by pickelhaube » Mon Jun 27, 2011 5:29 pm

Hey Pcoughran,

I got the pavey kit today !!!

I may get started on those sensors to get my consigned order out .
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

pickelhaube
Officer - Brigadier General
Officer - Brigadier General
Posts: 9653
Joined: Mon Jan 22, 2007 5:52 am
Location: New Orleans

Re: 1/18 Scale Pavehawk nose sensor prototype made !!

Post by pickelhaube » Thu Jun 30, 2011 1:24 pm

One of my customer have been wanting me to make these going on a year now.

Well they are made !!!

As I was at it I am wanting to make the tail boom sensors. But these pics are all I have to work off of. Dose anybody have any side pics of the sensors on the vertical tail boom ?

The model that Pc sent me does not have the detail. :evil:

Pics will be posted later on this evening.
Kirk Douglas : Mine hit the ground first
John Wayne : Mine was taller



Image

Birddog
Officer - Brigadier General
Officer - Brigadier General
Posts: 1919
Joined: Tue Dec 07, 2004 10:06 pm
Location: Georgia
Contact:

Re: 1/18 Scale Pavehawk nose sensor prototype made !!

Post by Birddog » Thu Jun 30, 2011 2:20 pm

I'm down for a set of these and a complete DAP kit if you make it. The wing stubs, rocket launchers and 30mm chain gun. All of it!!!....... :D :D
Go Ugly Early in 1/18!!

Still waiting and wishing for a 1/18 A-10 Warthog.

Post Reply