Vacu-forming
-
- Officer - Captain
- Posts: 678
- Joined: Fri Mar 27, 2009 3:45 am
- Location: Houston, Texas
- Contact:
Vacu-forming
I'm interested in the possibility of exploring vacu-forming sheet styrene. I'm guessing some of our master builders here use this technique. If so, I'd appreciate any tips, tricks, pics, etc. of how you've gone about this.
-
- Officer - Brigadier General
- Posts: 9648
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Re: Vacu-forming
I made my own.
I used a waffle maker that I got from a Thrift shop.The flip over type. I took the heating element out of one side cut a hole in the cover and made it so I could clip the plastic on it.
The other side still has the heating element on it.
So when the contraption is closed the plastic is over the heater.
When the plastic sags I flip it over onto the side were I have the vacume grid set up. I made it is such a way that it seals tight and pulls the heated soft plastic to conform to the plug.
I used a waffle maker that I got from a Thrift shop.The flip over type. I took the heating element out of one side cut a hole in the cover and made it so I could clip the plastic on it.
The other side still has the heating element on it.
So when the contraption is closed the plastic is over the heater.
When the plastic sags I flip it over onto the side were I have the vacume grid set up. I made it is such a way that it seals tight and pulls the heated soft plastic to conform to the plug.
-
- Officer - Brigadier General
- Posts: 3484
- Joined: Wed Oct 06, 2004 11:37 am
- Location: Pittsburgh, PA
- Contact:
Re: Vacu-forming
There's like a billion ways to do them, and basically they all work the same, so I'll just say that I'd avoid buying the plastic itself from hobby shops. That's my best tip. It's way too much money. Find a distributor of sheets of plastic in your area. You'll need a truck to haul it, but it's totally worth the effort.
http://www.JediDefender.com Bringing Balance to the Force
http://www.FFURG.com The Ultimate Customizing Resource.
Now Hasbro, make us some Head Sculpt & Endor Uniform variations! The new Rebel Fleet Trooper gets the JJ Seal of Approval Though!
http://www.FFURG.com The Ultimate Customizing Resource.
Now Hasbro, make us some Head Sculpt & Endor Uniform variations! The new Rebel Fleet Trooper gets the JJ Seal of Approval Though!
-
- Officer - Captain
- Posts: 678
- Joined: Fri Mar 27, 2009 3:45 am
- Location: Houston, Texas
- Contact:
Re: Vacu-forming
thanks for the tips -- the wafflle machine idea sounds pretty slick. Better than the "heat it up in wifey's oven" technique I've been reading about.
... so many projects, so little time ...
... so many projects, so little time ...
-
- Officer - Brigadier General
- Posts: 3484
- Joined: Wed Oct 06, 2004 11:37 am
- Location: Pittsburgh, PA
- Contact:
Re: Vacu-forming
PH, how big is the iron you're using? I can only find those kind of small and not really good for vac-forming larger projects.
http://www.JediDefender.com Bringing Balance to the Force
http://www.FFURG.com The Ultimate Customizing Resource.
Now Hasbro, make us some Head Sculpt & Endor Uniform variations! The new Rebel Fleet Trooper gets the JJ Seal of Approval Though!
http://www.FFURG.com The Ultimate Customizing Resource.
Now Hasbro, make us some Head Sculpt & Endor Uniform variations! The new Rebel Fleet Trooper gets the JJ Seal of Approval Though!
-
- Private First Class
- Posts: 10
- Joined: Sun Nov 28, 2010 2:28 pm
Re: Vacu-forming
what is vacu-forming? I heard about it somewhere else also can u post or pm me a link to video or picture of it?
-
- Officer - Brigadier General
- Posts: 9648
- Joined: Mon Jan 22, 2007 5:52 am
- Location: New Orleans
Re: Vacu-forming
Jesse James wrote:PH, how big is the iron you're using? I can only find those kind of small and not really good for vac-forming larger projects.
I am forming about 7" squares. The waffel iron I am using is made like a big clam shell. It has crome steel outsides then the hrating element then the irons.
I took the irons out and the heateing elementsare what heats the plastic.
I open and close the contraption to operate it.
I will try to post pics.
Vacume forming is the processs of heating thin plastic that you stretch over an object and bythe use of a vacume , the plastic gets pulled tight around the object you are trying to copy.
-
- Private First Class
- Posts: 10
- Joined: Sun Nov 28, 2010 2:28 pm
Re: Vacu-forming
thank u I know this informaion helps me.
-
- Officer - Brigadier General
- Posts: 6028
- Joined: Mon Oct 04, 2004 6:30 pm
- Location: Atlantic Coast
Re: Vacu-forming
What the....... I see mini Ho-229's in that first pic.
Thats a great idea Pickel.
Thats a great idea Pickel.