Will you buy the new ALL_GO Passion Wagen?
-
- Sergeant
- Posts: 167
- Joined: Fri Nov 13, 2009 6:15 pm
- Location: Hoagland, Indiana
I would like one, but I believe thay are starting out a little high. I hope they are not just watching Ebay prices and thinking this is reasonable.
I'm hoping that this is just a limited edition and future models will be slightly lower, I realize the thirty dollar 1/18s are gone, but if we are a niche market, I can't believe any new company can survive with limited sales.
I'm hoping that this is just a limited edition and future models will be slightly lower, I realize the thirty dollar 1/18s are gone, but if we are a niche market, I can't believe any new company can survive with limited sales.
Will you buy the new All_Go Passion Wagon
I've already got all the "stock" 21st Century P-51s...I'll get this one as well. (I always liked the 21st molds better than BBI's...)
Like many have already said, I really want AllGo to succeed and to keep the 1/18th scale alive. Who knows what will happen with JSI at this point?
I'll try to support any company that is viable in this scale, as long as I remain passionate (no pun intended) about collecting 1/18th planes!
Like many have already said, I really want AllGo to succeed and to keep the 1/18th scale alive. Who knows what will happen with JSI at this point?
I'll try to support any company that is viable in this scale, as long as I remain passionate (no pun intended) about collecting 1/18th planes!
-
- Officer - 1st Lieutenant
- Posts: 559
- Joined: Sun Nov 09, 2008 9:07 pm
- Location: Long Island, New York
I pretty much stick to armor, so the P-51 is not of interest to me. The KT is what I really want.
But I just want to say that while I can understand the reluctance to spend $100 for this plane; you really have to consider that no matter what, these guys are in business to make money. They have to pay rent on their office, phone bill, electric bill, etc. and no one works for free.
I have a friend who gets items manufactured (simple one piece plastic things too boot) in China and even if they already have the molds, it still costs quite a bit for them to change over the assembly lines to make your item. China is also not the bottom of the barrel cheap place it used to be, they have learned American compaines want things made and they will pay what the Chinese want to have it done.
No matter what I think we should all be happy that there is even a company willing to take the risk and make an attempt to give us 1/18 crazies something even remotely new. Lets give them a chance and not beat them down before item one has even become available. Just my 2 cents.
But I just want to say that while I can understand the reluctance to spend $100 for this plane; you really have to consider that no matter what, these guys are in business to make money. They have to pay rent on their office, phone bill, electric bill, etc. and no one works for free.
I have a friend who gets items manufactured (simple one piece plastic things too boot) in China and even if they already have the molds, it still costs quite a bit for them to change over the assembly lines to make your item. China is also not the bottom of the barrel cheap place it used to be, they have learned American compaines want things made and they will pay what the Chinese want to have it done.
No matter what I think we should all be happy that there is even a company willing to take the risk and make an attempt to give us 1/18 crazies something even remotely new. Lets give them a chance and not beat them down before item one has even become available. Just my 2 cents.
"When the people fear the government you have tyranny...when the
government fears the people you have liberty."
--Thomas Jefferson
government fears the people you have liberty."
--Thomas Jefferson
Would it be worth it if they tossed in a crewmember or two...hint. hint. I know they made the molds for WW2 Mechanics and tool boxes. If each release had a pilot and a different mechanic it would make it really hard to pass up.
Good trades: C00per, pcb122605, digger, vulgarvulture X2, General Blasto X2, Light.Inf.Scout, V2 Man, Sentinel, xddave, grunt1
[img]http://216.77.188.54/coDataImages/p/Groups/230/230828/folders/190465/2439227TAMBOSIGsmall.JPG[/img]
[img]http://216.77.188.54/coDataImages/p/Groups/230/230828/folders/190465/2439227TAMBOSIGsmall.JPG[/img]
p-51
This might have been answered, but does it even come with a pilot?Tambo wrote:Would it be worth it if they tossed in a crewmember or two...hint. hint. I know they made the molds for WW2 Mechanics and tool boxes. If each release had a pilot and a different mechanic it would make it really hard to pass up.
-
- Sergeant
- Posts: 107
- Joined: Mon Jul 21, 2008 9:13 pm
-
- Officer - Brigadier General
- Posts: 6028
- Joined: Mon Oct 04, 2004 6:30 pm
- Location: Atlantic Coast
I still don't know. I'm a 1:18th collector from the beginning ('01 '02). I saw the German Panther and the Me-109 at toys r us and got them both. But over time I seem to like Armor more.
All_GO's Mustang looks Fantastic and I like the direction their going, I know there are plenty of wing nuts that will help them sell 1:18th Aircraft.
Being a treadhead I'd like to see more Armor......the King Tiger and maybe a rebirth of the Panzer IV, you know there are many customs that can be made from this model.
All the Best to All-GO !!!!!!!!!!!!!
Normandy
All_GO's Mustang looks Fantastic and I like the direction their going, I know there are plenty of wing nuts that will help them sell 1:18th Aircraft.
Being a treadhead I'd like to see more Armor......the King Tiger and maybe a rebirth of the Panzer IV, you know there are many customs that can be made from this model.
All the Best to All-GO !!!!!!!!!!!!!
Normandy
-
- Officer - 2nd Lieutenant
- Posts: 272
- Joined: Mon Aug 10, 2009 8:58 pm
- Location: Philadelphia, PA
From the main All-Go thread.tko211 wrote: Still too early, we spoke about this today on a quick call and it looks like 100.00 is going to be the higher retail price for hobby shops and such who only carry 4-8 at a time. Typical vendor orders will yield a lower retail price point closer to the 79.99 mark or so. Again- this is all still being worked out and final numbers are just about ready. ETA is looking like April if all the QC process and final product checks go smooth.
Unfortunately there is simply no other way to produce 1:18 planes for less than the 79.99 mark (unless it was a komet or something like that). With Mass retail out of the picture and running shorter limited runs this is what the pricing will be like going forward. I'm ok with the price point knowing what it takes to make it work for both the manufacturer and the retailers.
At least All-Go plans to provide some superior service and include plans for any defective product. That's a good step in the right direction.
All for now. Hope that helps.
I don't think anybody said that the $100 price tag was set in stone.
Therefore, wouldn't a lot of people buy it for $80?
But then, the P51 and the Me109 (Bf109 ) are the most used, maybe overused aircraft in 1:18.
-
- Officer - Brigadier General
- Posts: 2022
- Joined: Wed Nov 12, 2008 12:33 pm
- Location: USA
i fell this is the best forum on the web! but we must take into consideration that we are small part of the purchasing public. i hope for the future of 1/18 that this first release sells out very quickly! and ALL_GO moves on to the next project
"SEMPER FIDELIS!"
Good Traders: Buckyroo, Razor17019, Sentinel
exether_mega, Snake, thehun, Mesa
Good Traders: Buckyroo, Razor17019, Sentinel
exether_mega, Snake, thehun, Mesa
-
- Officer - Brigadier General
- Posts: 2022
- Joined: Wed Nov 12, 2008 12:33 pm
- Location: USA
I didnt say we are just a forum! it seems the opinions are about split on the new PW. taking into consideration that thousands more people never use any forum and collect 1/18 i hope this means a better response from the larger collecting public. as a dealer myself ive sold hundreds of pieces that the forum has hated. i respect the views of the forum members and have taken into consideration the views of new products before i purchase them for my store. venders would do well by checking with forums to see member views and opinions. there are guys here who know far more than the people out there making the items we collect.
I will say i agree with many of the pros and cons im hoping the PW will do well in the general market!
I will say i agree with many of the pros and cons im hoping the PW will do well in the general market!
"SEMPER FIDELIS!"
Good Traders: Buckyroo, Razor17019, Sentinel
exether_mega, Snake, thehun, Mesa
Good Traders: Buckyroo, Razor17019, Sentinel
exether_mega, Snake, thehun, Mesa
Heck Ya I'm going to load up on these babes when they arrive. You guys who say you'll pass. Maybe the same thought crossed your mind when you left that Spitfire on the shelf. Info on the boards says 3200 pieces total. Just the members on this board could buy up that amount. The $100.00 price, my guess is several members here have it sized up right, more like $79.99 to $89.99 when it's all said and done.
Can't wait for the PW and can't wait to see what is next. Four in a row has me stoked.
Can't wait for the PW and can't wait to see what is next. Four in a row has me stoked.
AMERICAN_GRENADIER wrote:I didnt say we are just a forum! it seems the opinions are about split on the new PW. taking into consideration that thousands more people never use any forum and collect 1/18 i hope this means a better response from the larger collecting public. as a dealer myself ive sold hundreds of pieces that the forum has hated. i respect the views of the forum members and have taken into consideration the views of new products before i purchase them for my store. venders would do well by checking with forums to see member views and opinions. there are guys here who know far more than the people out there making the items we collect.
I will say i agree with many of the pros and cons im hoping the PW will do well in the general market!
I think it's to much for an over done P51 and it's a NoGo for me.
Just wondering since you said you are a retailer, how many of these $100 planes are you going to buy? Would you be afraid to order to many considering the response that most members here and elsewere are not going to pay the high price? Or are you going to load up on them and are considering them a hot item? Just curios on my end as to what retailers are going to do. Any response would be appreciated. Thanks!
A place for 1/18 chit chat with no BS
www.fighting118th.com
[img]http://i172.photobucket.com/albums/w26/KISSDAWIND/temp_logo.jpg[/img]
www.fighting118th.com
[img]http://i172.photobucket.com/albums/w26/KISSDAWIND/temp_logo.jpg[/img]